• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.44-53
• /
• 2012

Immersed boundary method(IBM) is a numerical scheme proposed to simulate flow field around complex objectives using simple Cartesian grid system. In the previous studies, the IBM has mostly been implemented to fractional step method based Navier-Stokes solvers. In this study, we implement the IBM to an incompressible Navier-Stokes solver which uses SIMPLE algorithm. The weight coefficients of the bi-linear and quadratic interpolation equations were formulated by using only geometric information of boundary to reconstruct velocities near IB. Flow around 2D circular cylinder at Re=40 and 100 was solved by using these formulations. It was found that the pressure buildup was not observed even when the bi-linear interpolation was adopted. The use of quadratic interpolation made the predicted aerodynamic forces in good agreement with those of previous studies. For an analysis of moving boundary, we smulated an oscillating circular cylinder with Re=100 and KC(Keulegan-Carpenter) number of 5. The predicted flow fields were compared with experimental data and they also showed good agreements.

• 한국통신학회논문지
• /
• 제30권9C호
• /
• pp.877-886
• /
• 2005

Various frame recovery algorithms have been suggested to overcome the communication quality degradation problem due to Internet-typical impairments on Voice over IP(VoIP) communications. In this paper, we propose a new receiver-based recovery method which is able to enhance recovered speech quality with almost free computational cost and without an additional increment of delay and bandwidth consumption. Most conventional recovery algorithms try to recover the lost or erroneous speech frames by reconstructing missing coefficients or speech signal during speech decoding process. Thus they eventually need to modify the decoder software. The proposed frame recovery algorithm tries to reconstruct the missing frame itself, and does not require the computational burden of modifying the decoder. In the proposed scheme, the Vector Quantization(VQ) codebook indices of the erased frame are directly estimated by referring the pre-computed VQ Codebook Index Interpolation Tables(VCIIT) using the VQ indices from the adjacent(previous and next) frames. We applied the proposed scheme to the ITU-T G.723.1 speech coder and found that it improved reconstructed speech quality and outperforms conventional G.723.1 loss recovery algorithm. Moreover, the suggested simple scheme can be easily applicable to practical VoIP systems because it requires a very small amount of additional computational cost and memory space.

• 전자공학회논문지SC
• /
• 제48권1호
• /
• pp.9-17
• /
• 2011

본 논문에서는 저전류 충방전용 배터리의 SOC(Storage of Charge)을 구하기 위하여 헤르미트 보간법을 이용한 새로운 SOC 다항식을 제안하였다. 또한 SOC 다항식의 계수들을 직접 구할 수 있는 일반 공식이 제안되었다. 실험한 결과, 제안된 방식이 기존의 볼츠만(Boltzmann) SOC 방정식보다 실측 SOC에 정확하게 근사됨을 알 수가 있었으며, 계산적으로도 효율적인 솔루션임이 입증 되었다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 춘계학술대회 학술발표 논문집
• /
• pp.86-89
• /
• 2000

In this paper, we consider a fuzzy system representation for polynomials of two variables. The representation we use is an exact transformation of the corresponding cubic spline interpolation function. We examine some of the properties of their fuzzy rule tables md prove that the rule table is symmetric or antisymmetric depending on whether the polynomial is symmetric or antisymmetric. A few examples are included to verify our proof. These results not only provide some insights on properties of the cubic spline interpolation coefficients but also provide some help in setting up fuzzy rule tables for functions of two variables.

• 대한수학회지
• /
• 제51권2호
• /
• pp.267-288
• /
• 2014

We propose and analyze two-scale product approximation for semilinear heat equations in the mixed finite element method. In order to efficiently resolve nonlinear algebraic equations resulting from the mixed method for semilinear parabolic problems, we treat the nonlinear terms using some interpolation operator and exploit a two-scale grid algorithm. With this scheme, the nonlinear problem is reduced to a linear problem on a fine scale mesh without losing overall accuracy of the final system. We derive optimal order $L^{\infty}((0, T];L^2({\Omega}))$-error estimates for the relevant variables. Numerical results are presented to support the theory developed in this paper.

• 한국전산유체공학회지
• /
• 제9권2호
• /
• pp.62-69
• /
• 2004

The present work solved 3D incompressible RANS equations on a rotating, multi-blocked grid system to efficiently analyze ducted marine propulsor with the interaction of propeller guidevane and annular duct. To handle the interface boundary between the guidevane and the propeller, a sliding multiblock technique based on the cubic spline interpolation was applied. To validate the present code, a turbine flow was simulated and the time-averaged pressure coefficients were compared with experiment. After the code validation, the flowfield around a ducted marine propeller with pre-swirl guidevane was simulated.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.188-193
• /
• 2003

The present work solved 3D incompressible RANS equation on a rotating, non-orthogonal multi-blocked grid system to efficiently analyze ducted marine propulsor with rotor-stator interaction. To handle the interface boundary between a rotor and a stator maintaining the conservative property, the sliding multiblock technique using the cubic spline interpolation and the bilinear interpolation technique were applied. To validate present code, a turbine flow having rotor- stator interaction was simulated. Time averaged pressure coefficients were compared with experiments and good agreement was obtained. After the code validation, the flowfield around a single-stage ducted marine propulsor was simulated.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.163-169
• /
• 1999

The numerical procedure has been developed for simulating incompressible viscous flow around a turbine stage with rotor-stator interaction. This study solves 2-D unsteady incompressible Navier-Stokes equations on a non-orthogonal curvilinear coordinate system. The Marker-and-Cell concept is applied to efficiently solve continuity equation. To impose an accurate boundary condition, O-H multiblocked grid system is generated. O-type grid and H-type grid is generated near and outer rotor-stator The cubic-spline interpolation is applied to handle a relative motion of a rotor to the stator. Turbulent flows have been modeled by the Baldwin- Lomax turbulent model. To validate present procedure, the time averaged pressure coefficients around the rotor and stator are compared with experiment and a good agreement obtained.

• 전자공학회논문지
• /
• 제50권3호
• /
• pp.59-67
• /
• 2013

Reed-Solomon(RS) 코드는 강력한 에러 정정 능력으로 널리 사용된다. 최근 제안된 RS 코드의 리스트 디코딩 알고리즘은 일반적인 디코더보다 더 큰 디코딩 반경을 가지며 하나 이상의 코드를 찾아낸다. 리스트 디코더는 복잡도가 매우 큰 Interpolation 단계를 포함하며 효율적인 하드웨어 설계가 필요하다. 본 논문에서는 연판정 RS 리스트 디코딩 알고리즘을 위한 효율적인 저복잡도 Interpolation 구조를 제안한다. 제안된 구조는 후보다항식의 Y 차수에 대해서는 병렬로 처리하며 X 차수에 대해서는 직렬로 처리한다. 후보다항식의 처리순서는 계수의 메모리사용의 효율성을 높이기 위하여 적응적으로 결정한다. 따라서 내부 저장공간이 최소화되며 메모리 구조와 접근이 단순해진다. 또한 제안된 구조는 각 모듈의 레이턴시가 유사하고 모듈간 스케쥴링을 최대한 중첩함으로써 높은 하드웨어 효율을 보여준다. 예제로써 (255, 239) RS 리스트 디코더를 설계하였으며 동부하이텍 $0.18{\mu}m$ 표준 셀 라이브러리를 사용하여 합성하여 검증되었고 결과 최대 동작 주파수는 200MHz이고 게이트 수는 25.1K이다.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.979-987
• /
• 1999

In a high precision vertical machining center, the estimation of cutting forces is important for many reasons such as prediction of chatter vibration, surface roughness and so on, and cutting forces are difficult to predict because they are very complex and time variant. In order to predict the cutting forces of end-milling process for various cutting conditions, a mathematical model is important and this model is based on chip load, cutting geometry, and the relationship between cutting forces and chip loads. Specific cutting force coefficients of the model have been obtained as interpolation function types by averaging farces of cutting tests. In this paper, the coefficients are obtained by neural network and the results of the conventional method and those of the proposed method are compared. The results show that the neural network method gives more correct values than the function type and that in teaming stage as the omitted numbers of experimental data increases the average errors increase.