• Journal of Korea Port Economic Association
• /
• v.21 no.4
• /
• pp.121-139
• /
• 2005

The case, Papera Traders Co. Ltd. and Others v. Hyundai Merchant Marine Co. Ltd and Another(The Eurasian Dream), was occurred on July, 1998 when the ISM Code became mandatory under SOLAS and from that date it applied to oil tankers, chemical tankers, gas carriers, bulk carriers and cargo high-speed craft of 500 gross tonnage and above. On July 23, 1998, a fire started on the deck of pure car carrier Eurasian Dream while in port at Sharjah. The source of fuel was the stevedores action of pouring petrol or transferring fuel in some way - refueling or pouring into a carburettor. The fire eventually destroyed or damaged the vessels cargo of new and second-hand vehicles and rendered the vessel itself a constructive total loss. Justice Cresswell held that the fire that destroyed or damaged the cargo was due to the unseaworthiness of the vessel they have the burden of proving that the vessel was unseaworthy before and at the beginning of the voyage and that the loss or damage was caused by that unseaworthiness. This case was a dispute between dependent and claimant alleging that the carrier should provide "properly man, equip and supply the ship and keep the ship so manned" under Hague-Visby Rules. Although ISM code was not officially applied to the carriage by car carriers until July 2002, a rule based on the code had customarily been employed as a mean for international dispute resolution. Examining the above case closely, the purpose of this study is to explore the relation of ship management and obligation to exercise due diligence in making the vessel seaworthy.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1308-1318
• /
• 2016

In order to prevent the maritime accident, all seafarers who work on fishing vessels over G/T 20 tons are required to undergo the basic safety training by the Seafarer's Act. 45% of domestic crews have boarded on the fishing vessels. However, the fishermen have been trained in accordance with the STCW(International convention on standards of training certification and watch-keeping for seafarers) Convention. But safety training courses for seaman do not reflect on the safety equipment and the limitation of the fishing vessel in the training contents which is organized in accordance with the merchant ship by STCW convention and code. Most of the fishing vessels are small fishing boat of less than G/T 80 tons. Small fishing vessels are operating with only a minimum of safety equipment that has been defined by the fishing vessel safety equipment standard. Due to the safety training that does not fit the situation of the fishing boat, the level of satisfaction by the crews onboard is low for the training. Furthermore, there is a difficulty in achieving the goal of safety education. In order to carry out the safety training that is suitable for fishermen, it is required to provide appropriate standards for the safety education of workers of small fishing boat, by understanding the current state of the domestic fishing vessels. The purpose of this study is to define the aforementioned problems and to provide the standard for the safety education of fishermen. In order to complete the purpose, the research team has conducted a analyzation for registered domestic fishing vessel and safety equipment standard.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.429-431
• /
• 2013

Today the role of Vessel Traffic Service(VTS) is increasing due to the function to preserve the safety of marine traffic and harbour, improve the efficiency of harbour, protect the marine environment. However, Vessel Traffic Service(VTS) lacks the international and domestic legal basis. For this reason it is hard to fulfill the positive and systemic operation of Vessel Traffic Service(VTS). It is essential to establish a domestic legal basis upon which to perform function and role of Vessel Traffic Service(VTS) fully. The purpose of this study is to propose the directing point for the adequate regulation of vessels to participate in Vessel Traffic Service(VTS) by doing a comparative analysis between domestic regulations and other countries's regulations.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.709-718
• /
• 2012

The pressurized water reactor APR1400 adopts DVI (Direct Vessel Injection) for the emergency cooling water in the upper downcomer annulus. The International Standard Problem number 50 (ISP-50) was launched with the aim to investigate thermal hydraulic phenomena during a 50% DVI line break scenario with best estimate codes making use of the experimental data available from the ATLAS facility located at KAERI. The present work describes the calculation results obtained for the ISP-50 using the RELAP5/MOD3.3 system code. The work aims at validation and assessment of the code to reproduce the observed phenomena and investigate about its limitations to predict complicated mixing phenomena between the subcooled emergency cooling water and the two-phase flow in the downcomer. The obtained results show that the overall trends of the main test variables are well reproduced by the calculations. In particular, the pressure in the primary system show excellent agreement with the experiment. The loop seal clearance phenomenon was observed in the calculation and it was found to have an important influence on the transient progression. Moreover, the collapsed water levels in the core are accurately reproduced in the simulations. However, the drop in the downcomer level before the activation of the DVI from safety injection tanks was underestimated due to multi-dimensional phenomena in the downcomer that are not properly captured by one-dimensional simulations.

• Ocean Systems Engineering
• /
• v.10 no.3
• /
• pp.333-357
• /
• 2020

International Maritime Organisation (IMO) regulations insist on reduced emission of CO₂, noxious and other environmentally dangerous gases from ship, which are usually let out while burning fossil fuel for running its propulsive machinery. Contrallability of ship during sailing has a direct implication on its course keeping and changing ability, and tries to have an optimised routing. Bad coursekeeping ability of a ship may lead to frequent use of rudder and resulting changes in the ship's drift angle. Consequently, it increases vessels resistance and also may lead to longer path for its journey due to zigzag movements. These adverse effects on the ship journey obviously lead to the increase in fuel consumption and higher emission. Hence, IMO has made it mandatory to evaluate the manoeuvring qualities of a ship at the designed stage itself. In this paper a numerical horizontal planar motion mechanism is simulated in CFD environment and from the force history, the hydrodynamic derivatives appearing in the manoeuvring equation of motion of a ship are estimated. These derivatives along with propeller thrust and rudder effects are used to simulate different standard manoeuvres of the vessel and check its parameters against the IMO requirements. The present study also simulates these manoeuvres by using numerical free running model for the same ship. The results obtained from both these studies are presented and discussed here.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.3
• /
• pp.127-135
• /
• 2014

On lot of ships, Ballast Water Treatment Systems(BWTS) are in use, or the newly built ship should be mandatory installation by 2017. It is IMO(International Maritime Organization) regulations. Because the vessel is in long distance, It is managed this system only in the vessel and it may occur considerable cost of maintenance when a problem arises from BWTS. We describe in this paper how to monitor treated ballast water to make sure the ballast water and BWTS on a ship is in proper condition, but before the port entrance. In addition, analysing and forecasting trend signal to prevent failure. Also we can expect reduce the cost of BWTS maintenance. We can monitor the sensor data value's change which collected through satellite from BWTS. And we can observate the ballasting and de-ballasting state of the vessel easily.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2012

The hydrodynamic interaction between ship and bank can't be neglected when a vessel is app- roached toward the tip of a wedge-shaped bank in restricted waterways, such as in a harbor, near some fixed obstacles, or in a narrow channel. In this paper, the characteristic features of the hydrodynamic interaction acting on a slowly moving vessel in the proximity of a wedge-shaped bank are described and illustrated, and the effects of water depth and the spacing between ship and wedge-shaped bank are summarized and discussed based on the slender body theory. From the theoretical results, it indicated that the hydrodynamic interactions decrease as wedge-shaped bank of angle ${\beta}$ in-creases. For water depth to draft ratio less than about 2.0, the hydrodynamic interactions between ship and bank in-crease sharply as h/d decreases, regardless of the wedge-shaped bank of angle ${\beta}$. Also, for lateral separation more than about 0.2L between ship and wedge-shaped bank, it can be concluded that the bank effects decrease largely as the separation increases.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.691-698
• /
• 2020

In this study, the effects of hydrodynamic interceptors on a high-speed vessel were investigated to identify the operating principle based on experiments. Model tests were performed using a high-speed towing carriage. The resistance, trim and rise of Center of Gravity (CG) of the high-speed vessel were measured for various ship speeds and interceptor heights. As the interceptor height increased, the trim and rise of CG were reduced. In order to quantitatively analyze these phenomena, the pressure at the stern bottom was measured using tactile sensors. The reliability of the measured results from the tactile sensors was verified through repeat tests. The pressure on the stern bottom increased in proportion to the interceptor height, as the interceptor partially blocked the flow there. Then, the trim was reduced. However, as the ship speed increases, the pressure at the location close to the interceptor decreases when the interceptor height is small, leading to increased trim. Therefore, the interceptor height for running attitude control should be carefully determined considering multiple factors in the operating condition of the high-speed planing hull.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.352-366
• /
• 2021

To decrease Europe's harmful emissions, the European Union aims to substantially increase its offshore wind energy capacity. To further develop offshore wind energy, investment in ever-larger construction vessels is necessary. However, this market is characterised by seemingly unpredictable growth of market demand, turbine capacity and distance from shore. Currently it is difficult to deal with such market uncertainty within the ship design process. This research aims to develop a method that is able to deal with market uncertainty in early ship design by increasing knowledge when design freedom is still high. The method uses uncertainty modelling prior to the requirement definition stage by performing global research into the market, and during the concept design stage by iteratively co-evolving the vessel design and business case in parallel. The method consists of three parts; simulating an expected market from data, modelling multiple vessel designs, and an uncertainty model that evaluates the performance of the vessels in the market. The case study into offshore wind foundation installation vessels showed that the method can provide valuable insight into the effect of ship parameters like main dimensions, crane size and ship speed on the performance in an uncertain market. These results were used to create a value robust design, which is capable of handling uncertainty without changes to the vessel. The developed method thus provides a way to deal with market uncertainty in the early ship design process.

• Journal of Korean Port Research
• /
• v.9 no.1
• /
• pp.33-43
• /
• 1995

Korean economic and industrial structure has been seperated into some areas with the trend of the change to the bloc system of international economy: the Gyeongin including the capital area, the Middle-West, the South-West, the South-East, and the Eastern sea areas. Mokpo port has played a major role as the central one of the South-West area and the entrance of Yeong-san river of Jeonnam province gate. Some studies has been done on the Mokpo port, but there is no research of the analytical approach about it. In this paper, we analyze the data of 1994's on the domestic and oceangoing piers in the Mokpo port and simulate the transportation process of it through a queueing model. The results of the simulation are summarized as follows: The average arrival interval of the domestic vessel is 6.034 hours. The average service time and the berth utility rate are 24.056 hours and over 100%, respectively. The average arrival interval of the oceangoing vessel is 34.48 hours. The average service time and the berth utility rate are 120.04 hours and the 34.91%, respectively. The proposal to improving of the Mokpo port as follows: It is desirable to extend the capacity of domestic pier to about 50% for the optimal utility rate of 70% and in the case of oceangoing pier to be increase 65% of the vessel capacity for the optimal utility rate of 70%.