• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.320-334
• /
• 2020

This study presents an application of hydro-mechanical coupled Particle Flow Code 3D (PFC3D) to simulation of fluid injection induced fault slip experiment conducted in Mont Terri Switzerland as a part of a task in an international research project DECOVALEX-2019. We also aimed as identifying the current limitations of the modelling method and issues for further development. A fluid flow algorithm was developed and implemented in a 3D pore-pipe network model in a 3D bonded particle assembly using PFC3D v5, and was applied to Mont Terri Step 2 minor fault activation experiment. The simulated results showed that the injected fluid migrates through the permeable fault zone and induces fault deformation, demonstrating a full hydro-mechanical coupled behavior. The simulated results were, however, partially matching with the field measurement. The simulated pressure build-up at the monitoring location showed linear and progressive increase, whereas the field measurement showed an abrupt increase associated with the fault slip We conclude that such difference between the modelling and the field test is due to the structure of the fault in the model which was represented as a combination of damage zone and core fractures. The modelled fault is likely larger in size than the real fault in Mont Terri site. Therefore, the modelled fault allows several path ways of fluid flow from the injection location to the pressure monitoring location, leading to smooth pressure build-up at the monitoring location while the injection pressure increases, and an early start of pressure decay even before the injection pressure reaches the maximum. We also conclude that the clay filling in the real fault could have acted as a fluid barrier which may have resulted in formation of fluid over-pressurization locally in the fault. Unlike the pressure result, the simulated fault deformations were matching with the field measurements. A better way of modelling a heterogeneous clay-filled fault structure with a narrow zone should be studied further to improve the applicability of the modelling method to fluid injection induced fault activation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.363-373
• /
• 2020

During last decades numerous studies generating orthoimage have been carried out. Traditional methods require exterior orientation parameters of aerial images and precise 3D object modeling data and DTM (Digital Terrain Model) to detect and recover occlusion areas. Furthermore, it is challenging task to automate the complicated process. In this paper, we proposed a new concept of true orthoimage generation using DL (Deep Learning). DL is rapidly used in wide range of fields. In particular, GAN (Generative Adversarial Network) is one of the DL models for various tasks in imaging processing and computer vision. The generator tries to produce results similar to the real images, while discriminator judges fake and real images until the results are satisfied. Such mutually adversarial mechanism improves quality of the results. Experiments were performed using GAN-based Pix2Pix model by utilizing IR (Infrared) orthoimages, intensity from LiDAR data provided by the German Society for Photogrammetry, Remote Sensing and Geoinformation (DGPF) through the ISPRS (International Society for Photogrammetry and Remote Sensing). Two approaches were implemented: (1) One-step training with intensity data and high resolution orthoimages, (2) Recursive training with intensity data and color-coded low resolution intensity images for progressive enhancement of the results. Two methods provided similar quality based on FID (Fréchet Inception Distance) measures. However, if quality of the input data is close to the target image, better results could be obtained by increasing epoch. This paper is an early experimental study for feasibility of DL-based true orthoimage generation and further improvement would be necessary.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.169-178
• /
• 2011

BACKGROUND: This study aimed to estimate the measurement uncertainty associated with determination of cadmium and lead from tomato paste by ICP/MS. The sources of measurement uncertainty (i.e. sample weight, final volume, standard weight, purity, molecular weight, working standard solution, calibration curve, recovery and repeatability) in associated with the analysis of cadmium and lead were evaluated. METHODS AND RESULTS: The guide to the expression of uncertainty was used for the GUM (Guide to the expression of Uncertainty in Measurement) and Draft EURACHEM/CITAC (EURACHEM: A network of organization for analytical chemistry in Europe/Co-Operation on International Traceability in Analytical Chemistry) Guide with mathematical calculation and statistical analysis. The uncertainty components were evaluated by either Type A or Type B methods and the combined standard uncertainty were calculated by statistical analysis using several factors. Expected uncertainty of cadmium and lead was $0.106{\pm}0.015$ mg/kg (k=2.09) and $0.302{\pm}0.029$ mg/kg (k=2.16), on basis of 95% confidence of Certified Reference Material (CRM) which was within certification range of $0.112{\pm}0.007$ mg/kg for cadmium (k=2.03) and $0.316{\pm}0.021$ mg/kg for lead (k=2.01), respectively. CONCLUSION(s): The most influential components in the uncertainty of heavy metals analysis were confirmed as recovery, standard calibration curve and standard solution were identified as the most influential components causing uncertainty of heavy metal analysis. Therefore, more careful consideration is required in these steps to reduce uncertainty of heavy metals analysis in tomato paste.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.25-34
• /
• 2015

In this research, we applied a procedure of quality control (QC) to the agro-meteorological data measured at the Suwon weather station of Korea Meteorological Administration (KMA). The QC was conducted through six steps based on the KMA Real-time Quality control system for Meteorological Observation Data (RQMOD) and four steps based on the International Soil Moisture Network (ISMN) QC modules. In addition, we set up our own empirical method to remove erroneous data which could not be filtered by the RQMOD and ISMN methods. After all these QC procedures, a well-refined agro-meteorological dataset was complied at both air and soil temperatures. Our research suggests that soil moisture requires more detailed and reliable grounds to remove doubtful data, especially in winter with its abnormal variations. The raw data and the data after QC are now available at the NCAM website (http://ncam.kr/page/req/agri_weather.php).

• Korean Journal of Environment and Ecology
• /
• v.34 no.2
• /
• pp.99-105
• /
• 2020

Migratory birds use a variety of breeding and wintering sites, and it is particularly important to understand more information on breeding and feeding sites for the conservation and management of endangered species. Black-faced spoonbills (Platalea minor) are an international endangered species distributed in East Asia. The majority of black-faced spoonbills breed on uninhabited islets off the west coast of the Korean Peninsula during the breeding season, and they are distributed in East Asia such as Taiwan, Hong Kong, southern China, Japan, and Jeju island during the winter season. In this study, we used a wild animal location tracking system to analyze and compare home ranges of three black-faced spoonbills spending the post-fledging stage in Gujido islet in Incheon and Chilsando islet in Yeonggwang each in 2015. The tree black-faced spoonbills in Guji islet showed a home range in coastal areas in Hwanghaenam-do and Gangneung-gun. The home range size (mean±SD) was estimated to be 425.49±116.95 ㎢ using 100% MCP, 43.61±18.51 ㎢ using KDE 95%, and 7.46±3.68 ㎢using KDE 50%. The tree black-faced spoonbills in Chilsando islet showed a home range in the Baeksu tidal flat and the Buan Saemangeum area with a size of 99.38±55.29 ㎢ using 100% MCP, 19.87±6.05 ㎢ using KDE 95%, and 1.16±0.53 ㎢ using KDE 50%. The figured indicated that the tree black-faced spoonbills breeding in Gujido islet had a wider home range than those breeding in Chilsando islet. During the post-fledging stage, the home ranges of black-faced spoonbills were mostly breeding in mudflats. Therefore, it is necessary to minimize human intervention, such as the construction of roads and structures and the human access, to protect the habitats during the period.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.148-155
• /
• 2002

Multithreaded models improve the efficiency of parallel systems by combining inner parallelism, asynchronous data availability and the locality of von Neumann model. This model executes thread code which is generated by compiler and of which quality is given by the method of generation. But multithreaded models have the demerit that execution model is restricted to a specific platform. On the contrary, Java has the platform independency, so if we can translate from threads code to Java bytecode, we can use the advantages of multithreaded models in many platforms. Java executes Java bytecode which is intermediate language format for Java virtual machine. Java bytecode plays a role of an intermediate language in translator and Java virtual machine work as back-end in translator. But, Java bytecode which is translated from multithreaded models have the demerit that it is not secure. This paper, multhithread code whose feature of platform independent can execute in java virtual machine. We design and implement translator which translate from thread code of multithreaded code to Java bytecode and which check secure problems from Java bytecode.

• Journal of Korea Water Resources Association
• /
• v.46 no.6
• /
• pp.597-611
• /
• 2013

This paper presents the methodology for construction of time-area curve via the width function and thereby rational estimation of time of concentration and storage coefficient of Clark model within the framework of method of moments. To this end time-area curve is built by rescaling the grid-based width function under the assumption of pure translation and then the analytical expressions for two parameters of Clark model are proposed in terms of method of moments. The methodology in this study based on the analytical expressions mentioned before is compared with both (1) the traditional optimization method of Clark model provided by HEC-1 in which the symmetric time-area curve is used and the difference between observed and simulated hydrographs is minimized (2) and the same optimization method but replacing time-area curve with rescaled width function in respect of peak discharge and time to peak of simulated direct runoff hydrographs and their efficiency coefficient relative to the observed ones. The following points are worth of emphasizing: (1) The optimization method by HEC-1 with rescaled width function among others results in the parameters well reflecting the observed runoff hydrograph with respect to peak discharge coordinates and coefficient of efficiency; (2) For the better application of Clark model it is recommended to use the time-area curve capable of accounting for irregular drainage structure of a river basin such as rescaled width function instead of symmetric time-area curve by HEC-1; (3) Moment-based methodology with rescaled width function developed in this study also gives rise to satisfactory simulation results in terms of peak discharge coordinates and coefficient of efficiency. Especially the mean velocities estimated from this method, characterizing the translation effect of time-area curve, are well consistent with the field surveying results for the points of interest in this study; (4) It is confirmed that the moment-based methodology could be an effective tool for quantitative assessment of translation and storage effects of natural river basin; (5) The runoff hydrographs simulated by the moment-based methodology tend to be more right skewed relative to the observed ones and have lower peaks. It is inferred that this is due to consideration of only one mean velocity in the parameter estimation. Further research is required to combine the hydrodynamic heterogeneity between hillslope and channel network into the construction of time-area curve.

• Journal of the Korean Geographical Society
• /
• v.29 no.2
• /
• pp.117-136
• /
• 1994

Contemporary global space economy is so dynamic that any one specific structural force can not explain the whole dynamic processes or trajectories of spatial industrial development. The major purpose of this paper is extending the traditional notion of industrial districts to functioning and development of new industrial districts with relation to the development of high technology industries. Several dynamic forces, which are dominated in new industrial districts in the modern space economy, are incorporated in the formation and dynamic aspects of new industrial districts. Even though key forces governing Marshallian industrial district are localization of small firms, division of labor between firms, constructive cooperation, and industrial atmosphere, Marshall points out a possibility of growing importance of large firms and non-local networks in the districts with changes of external environments. Some of Italian industrial districts can be regarded as Marshallian industrial districts in broader context, but the role of local authorities or institutions and local embeddedness seem to be more important in the Italian industrial districts. More critical implication form the review of Marshallian industrial districts and Italian industrial districts is that the industrial districts are not a static concept but a dynamic one: small firm based industrial districts can be regarded as only a specific feature evolved over time. Dynamic aspects of new industrial districts are resulting from coexistence of contrasting forces governing the functioning and formation of the districts in contemporary global space economy. The contrasting forces governing new industrial districts are coexistence of flexible and mass production systems, local and global networks, local and non-local embeddedness, and small and large firms. Because of these coexistence of contrasting forces, there are various types of new industrial districts. Nine types of industrial districts are identified based on local/non-local networks and intensity of networks in both suppliers and customers linkages. The different types of new industrial districts are described by differences in production systems, embeddedness, governance, cooperation and competition, and institutional factors. Out of nine types of industrial districts, four types - Marshallian; suppliers hub and spoke; customers hub and spoke; and satellite - are regarded as distinctive new industrial districts and four additional types - advanced hub and spoke types (suppliers and customers) and mature satellites (suppliers and customers) - can be evolved from the distinctive types and may be regarded as hybrid types. The last one - pioneering high technology industrial district - can be developed from the advanced hub and spoke types and this type is a most advanced modern industrial district in the era of globalization and high technology. The dynamic aspects of the districts are related with the coexistence of the contrasting forces in the contemporary global space economy. However, the development trajectory is not a natural one and not all the industrial districts can develop to the other hybrid types. Traditionally, localization of industries was developed by historical chances. In the process of high technology industrial development in contemporary global space economy, however, policy and strategies are critical for the formation and evolution of new industrial districts. It needs formation of supportive tissues of institutions for evolution of dyamic pattern of high technology related new industrial districts. Some of the original distinctive types of new industrial districts can not follow the path or trajectory suggested in this paper and may be declined without advancing, if there is no formation of supportive social structure or policy. Provision of information infrastructure and diffusion of an entrepreneurship through the positive supports of local government, public institutions, universities, trade associations and industry associations are important for the evolution of the dynamic new industrial districts. Reduction of sunk costs through the supports for training and retraining of skilled labor, the formation of flexible labor markets, and the establishment of cheap and available telecommunication networks is also regarded as a significant strategies for dynamic progress of new industrial districts in the era of high technology industrial development. In addition, development of intensive international networks in production, technology and information is important policy issue for formation and evolution of the new industrial districts which are related with high technology industrial development.

• Journal of Intelligence and Information Systems
• /
• v.22 no.2
• /
• pp.81-96
• /
• 2016

As the internet has become widespread and easy to access everywhere, it is common for people to search information via online search engines such as Google and Naver in everyday life. Recent studies have used online search volume of specific keyword as a measure of the internet users' attention in order to predict disease outbreaks such as flu and cancer, an unemployment rate, and an index of a nation's economic condition, and etc. For stock traders, web search is also one of major information resources to obtain data about individual stock items. Therefore, search volume of a stock item can reflect the amount of investors' attention on it. The investor attention has been regarded as a crucial factor influencing on stock price but it has been measured by indirect proxies such as market capitalization, trading volume, advertising expense, and etc. It has been theoretically and empirically proved that an increase of investors' attention on a stock item brings temporary increase of the stock price and the price recovers in the long run. Recent development of internet environment enables to measure the investor attention directly by the internet search volume of individual stock item, which has been used to show the attention-induced price pressure. Previous studies focus mainly on Dow Jones and NASDAQ market in the United States. In this paper, we investigate the relationship between the individual investors' attention measured by the internet search volumes and stock price changes of individual stock items in the KOSDAQ market in Korea, where the proportion of the trades by individual investors are about 90% of the total. In addition, we examine the difference between industries in the influence of investors' attention on stock return. The internet search volume of stocks were gathered from "Naver Trend" service weekly between January 2007 and June 2015. The regression model with the error term with AR(1) covariance structure is used to analyze the data since the weekly prices in a stock item are systematically correlated. The market capitalization, trading volume, the increment of trading volume, and the month in which each trade occurs are included in the model as control variables. The fitted model shows that an abnormal increase of search volume of a stock item has a positive influence on the stock return and the amount of the influence varies among the industry. The stock items in IT software, construction, and distribution industries have shown to be more influenced by the abnormally large internet search volume than the average across the industries. On the other hand, the stock items in IT hardware, manufacturing, entertainment, finance, and communication industries are less influenced by the abnormal search volume than the average. In order to verify price pressure caused by investors' attention in KOSDAQ, the stock return of the current week is modelled using the abnormal search volume observed one to four weeks ahead. On average, the abnormally large increment of the search volume increased the stock return of the current week and one week later, and it decreased the stock return in two and three weeks later. There is no significant relationship with the stock return after 4 weeks. This relationship differs among the industries. An abnormal search volume brings particularly severe price reversal on the stocks in the IT software industry, which are often to be targets of irrational investments by individual investors. An abnormal search volume caused less severe price reversal on the stocks in the manufacturing and IT hardware industries than on average across the industries. The price reversal was not observed in the communication, finance, entertainment, and transportation industries, which are known to be influenced largely by macro-economic factors such as oil price and currency exchange rate. The result of this study can be utilized to construct an intelligent trading system based on the big data gathered from web search engines, social network services, and internet communities. Particularly, the difference of price reversal effect between industries may provide useful information to make a portfolio and build an investment strategy.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1245-1257
• /
• 2021

GOCI-II, succeeding the mission of GOCI, was launched in February 2020 and has been in regular operation since October 2020. Korea Institute of Ocean Science and Technology (KIOST) processes and produces in real time Level-1B and 26 Level-2 outputs, which then are provided by Korea Hydrographic and Oceanographic Agency (KHOA). We introduced current status of regular GOCI-II operation and showed future improvement. Basic GOCI-II products including chlorophyll-a, total suspended materials, and colored dissolved organic matter concentration, are induced by OC4 and YOC algorithms, which were described in detail. For the full disk (FD), imaging schedule was established considering solar zenith angle and sun glint during the in-orbital test, but improved by further considering satellite zenith angle. The number of slots satisfying the condition 'Best Ocean' significantly increased from 15 to 78. GOCI-II calibration requirements were presented based on that by European Space Agency (ESA) and candidate fixed locations for calibrating local observation area were. The quality management of FD uses research ships and overseas bases of KIOST, but it is necessary to establish an international calibration/validation network. These results are expected to enhance the understanding of users for output processing and help establish detailed plans for future quality management tasks.