• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.223-231
• /
• 2003

Statement of problem : Little is known about the effect of a counter-torque device and the internal hexagon of abutment on the tightening torque transmitted to the implant. Purpose : The purpose of this study was to examine the effect of a counter-torque device and the internal hexagon of abutment on the tightening torque transmitted to the implant. Material and Methods : In this study, three types of abutment were used, (1) two-piece conical abutment with hexagon, (2) two-piece conical abutment without hexagon, and (3) one-piece conical abutment without hexagon. The experimental groups were divided into five groups according to the type of abutment and the usage of a counter-torque device. Group I : two-piece conical abutment with internal hexagon was tightened without the use of a counter-torque device. Group II : two-piece conical abutment without internal hexagon was tightened without the use of a counter-torque device. Group III : one-piece conical abutment without internal hexagon was tightened without the use of a counter-torque device. Group IV : two-piece conical abutment with internal hexagon was tightened with the use of a counter-torque device Group V : two-piece conical abutment without internal hexagon was tightened with the use of a counter-torque device. Abutments were tightened 20Ncm torque with the use of manual torque wrench and then torque values were measured by torque-gauge. After the measurement of torque values, all groups were loosened with the use of manual torque wrench and then detorque values were measured by torque-gauge. Results : The results were as follows. 1. There were no differences in torque values among three types of abutment. 2. Regardless of the existence of the internal hexagon of abutment, a counter-torque device decreased the tightening torque transmitted to the implant about 92% 3. In group III showed the highest detorque value, however there were no differences among group I, II, IV and V. Conclusion : Within the limitations of this study, it was concluded that the internal hexagon of abutment has no effect on the tightening torque transmitted to the implant and the detorque value of abutment screw. The use of a counter-torque device is essential to prevent microfracture on the implant-bone interface but has no effect on preload.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.5
• /
• pp.433-439
• /
• 2006

Background: Although airway hyper-responsiveness is one of the characteristics of asthma. bronchial hyper-responsiveness has also been observed to some degree in patients with chronic obstructive pulmonary disease (COPD). Moreover, several reports have demonstrated that a number of patients have both COPD and asthma. The methacholine bronchial challenge test (MCT) is a widely used method for the detecting and quantifying the airway hyper- responsiveness, and is one of the diagnostic tools in asthma. However, the significance of MCT in differentiating asthma or COPD combined with asthma from pure COPD has not been defined. The aim of this study was to determine the role of MCT in differentiating asthma from pure COPD. Method: This study was performed prospectively and was composed of one hundred eleven patients who had undergone MCT at Chonbuk National University Hospital. Sixty-five asthma patients and 23 COPD patients were enrolled and their MCT data were analyzed and compared with the results of a control group. Result: The positive rates of MCT were 65%, 30%, and 9% in the asthma, COPD, and control groups, respectively. The mean $PC_{20}$ values of the asthma, COPD, and control groups were $8.1{\pm}1.16mg/mL$, $16.9{\pm}2.21mg/mL$, and $22.0{\pm}1.47mg/mL$, respectively. The sensitivity, specificity, positive predictive value, and negative predictive value of MCT for diagnosing asthma were 65%, 84%, 81%, and 69%, respectively. The sensitivity, specificity, positive predictive value, and negative predictive value of MCT (ed note: please check this as I believe that these values correspond to the one $PC_{20}$ value. Please check my changes.) at the new cut-off points of$PC_{20}{\leq}16mg/ml$, were 80%, 75%, 78%, and 78%, respectively. Conclusion: MCT using the new cut-off point can be used as a more precise and useful diagnostic tool for distinguishing asthma from pure COPD.

• Tuberculosis and Respiratory Diseases
• /
• v.80 no.2
• /
• pp.105-112
• /
• 2017

Spirometry is a physiological test for assessing the functional aspect of the lungs using an objective indicator to measure the maximum amount of air that a patient can inhale and exhale. Acceptable spirometry testing needs to be conducted three times by an acceptable and reproducible method for determining forced vital capacity (FVC). Until the results of three tests meet the criteria of reproducibility, the test should be repeated up to eight times. Interpretation of spirometry should be clear, concise, and informative. Additionally, spirometry should guarantee optimal quality prior to the interpreting spirometry results. Our guideline adopts a fixed normal predictive value instead of the lower limit of normal as the reference value because fixed value is more convenient and also accepts FVC instead of vital capacity (VC) because measurement of VC using a spirometer is impossible. The bronchodilator test is a method for measuring the changes in lung capacity after inhaling a short-acting ${\beta}-agonist$ that dilates the airway. When an obstructive ventilatory defect is observed, this test helps to diagnose and evaluate asthma and chronic obstructive pulmonary disease by measuring reversibility with the use of an inhaled bronchodilator. A positive response to a bronchodilator is generally defined as an increase of ${\geq}12%$ and ${\geq}200mL$ as an absolute value compared with a baseline in either forced expiratory volume at 1 second or FVC.

• Culinary science and hospitality research
• /
• v.18 no.5
• /
• pp.63-79
• /
• 2012

The purpose of this study is to empirically determine the structural relationship between employee constructs such as internal service quality, employee satisfaction, and organization commitment and customer constructs such as perceived value, customer satisfaction, and loyalty to suggest an effective business strategy for restaurant business. To do this, the study consulted with the Korea Restaurant Association, the representative of Korean food service and got the intention of participating in the research from the Daegu branch. As a result, 51 restaurants registered in the Daegu branch who showed their intention to participate were selected as an initial sample. Also, other restaurants were introduced through snow-ball sampling method by the owners of restaurants who finished responding to the survey, and total 100 restaurants were examined. A survey was conducted to external customers who visited restaurants and internal customers working there. For final analysis, 741 questionnaires of internal customers and 970 questionnaires of external customers were used. The result of analysis showed that team-work & communication in internal service quality has a significant effect on employee satisfaction, employee satisfaction on organization commitment, and organization commitment on value perceived by customers. Also, perceived value has a significant effect on customer satisfaction and loyalty, and customer satisfaction on loyalty.

• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2002

The objectives of the study were to analyze the acoustic characteristics related to the internal quality factors of watermelon(Citrulus Vulgaris Schrad). Among the various internal quality factors, only four factors such as ripeness, inside cavity, yellow belt and blood flesh were considered in this study. Relationships between the internal quality factors, the day after fruit set and the day after harvest were also investigated. Test apparatus was the same as the apparatus described in the previous study(Choi et at., 2000). The selected sample was divided into four groups; 69 samples used for ripeness tests 56 samples for ripeness test along the day after fruit set and for yellow belt detection, 60 samples for ripeness along the day after harvest 44 samples fur blood flesh detection. It was shown that the first peak frequencies shifted to the lower range and the energy ratios of the bandwidths between 0∼550 Hz to the bandwidths between 850∼2500 Hz increased as the day after fruit set elapsed. Since the acoustic responses of the watermelon such as frequency and magnitude began to change from 10 days after harvest, the storage period of watermelon in a normal temperature condition seemed to be approximately 10 days after harvest. The ratios of the first peak amplitude to the maximum peak amplitude fur the sound watermelon showed the higher value than that fur watermelon with cavity inside, and the separation between the sound and cavity inside could be accomplished by the ratio value of 0.25. The energy ratios (0∼550 Hz/850∼2,500 Hz) for the watermelon with cavity inside showed the higher value than 2.3. The frequency characteristics of the yellow belt watermelon appeared mostly in the range of 600∼900 Hz frequencies. The yellow belt watermelon showing the energy spectral density function at this frequency range to be over 70 seemed to be not a marketable commodity, The energy ratios(0∼550 Hz/850∼2,500 Hz) for the blood flesh watermelon showed the higher value than 3.5.

• The Korean Journal of Nuclear Medicine
• /
• v.25 no.1
• /
• pp.76-80
• /
• 1991

To evaluate the prognostic significance of $^{99m}Tc-phytate$ liver scintigraphy in patients with cirrhosis, we measured the grade of extrahepatic uptake (EHU) of $^{99m}Tc-phytate$, from 0 (absent EHU) to 5 (important EHU), according to the relative distribution of the radiotracer among liver, spleen and bone marrow. The results were as follows: 1) EHU score was correlated to the Pugh score (r=0.64) and to survival. 2) The ROC curve on an observed status of death was superior for EHU score. In conclusion, $^{99m}Tc-phytate$ liver scintigraphy nay be a useful prognostic method in patients with liver cirrhosis.

• Journal of Ginseng Research
• /
• v.36 no.4
• /
• pp.469-476
• /
• 2012

Raw ginseng root of Panax ginseng is graded according to its shape and the quality of its internal tissue. A variety of grades are sold with prices according to grade. If an inferior raw ginseng is purchased, the consumer experience an economic loss. This research was conducted in order to explore the possibility of developing a noninvasive method for investigating raw ginseng's internal tissue. It has been determined that computed tomography (CT) scanner images agreed with actual cross-sections of raw ginseng. CT images were obtained to assess the internal portions of raw ginseng, and CT scans of raw ginseng were thoroughly measured using the Hounsfield unit (HU) system, since it allows for a more detailed analysis compared to nuclear magnetic resonance imaging. HU is a measure of attenuation used for CT images, with each pixel being assigned a value using a scale on which air is defined as -1000, water as 0 and compact bone as +1000. It takes about one second to process are slice and produce an image of the raw ginseng by a one channel CT scanner. An image good enough to discriminate the internal tissues can be obtained in 1/24 seconds with a one-channel CT scanner. Using this method, images of raw ginseng can be obtained and the characteristics of the internal tissues can be observed in a short time.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1066-1078
• /
• 2020

The present paper describes an analytic solution procedure for flexural vibration of a rotationally restrained hinged-hinged Timoshenko beam at the supports during an earthquake. Focusing on maximal magnitudes of internal loads such as bending moment and shearing force under wide variations of two parameters, kL/EI and kGAL²/EI, various beams under synchronous and asynchronous support motions are simulated. The simulations under asynchronous support motions show the following facts. The variations of the maximal magnitudes of internal loads of stocky beams due to the variation of kL/EI from zero to infinity show much wider variations than those of slender beams as kGAL²/EI decreases. The maximal magnitudes of internal loads of a beam tend to be governed by their static components as kL/EI increases and kGAL²/EI decreases. When the internal loads are governed by their static components, maximal magnitudes of internal loads of the stocky tend to increase monotonically as the value of kL/EI increases. However, the simulations under synchronous support motions show the static components of the internal loads vanish and the internal loads are governed by dynamic components irrespective of the two parameters.

• Management & Information Systems Review
• /
• v.32 no.5
• /
• pp.45-68
• /
• 2013

The goal of supply chain integration is to improve the effectiveness and efficiency of supply chain in order to deliver customer value. So, the fit of between supply chain integration strategy and customer value strategy is very important. Therefore, this study explores the different types of relationship between supply chain integration and customer value, as well as in the firm performances. Cluster analysis is used to develop the typology of supply chain integration, and five typology (High Internal Oriented Integration, Medium Oriented Internal Integration, High Supply Chain Integration, High Customer Oriented Integration, Medium Oriented External Integration) are identified. Analysis of variance is used to test the relationship between supply chain integration typology and customer value, and firm performances. The results show that there are statistically significant differences in customer value and firm performances.

• Journal of Elementary Mathematics Education in Korea
• /
• v.19 no.4
• /
• pp.485-499
• /
• 2015

In this paper, focusing on definitions of terms related to ratio (a:b, external ratio, internal ratio, percentage, proportion, bi-ui-gap(value of a:b)), elementary school mathematics textbooks of Korea and Japan are compared. We can find significant differences between Korean and Japanese textbooks. In Korean textbook, 'bi-yul' includes both of the internal ratio and the external ratio. In Japanese textbooks, the external ratio(amount of unit size) and the internal ratio(wariai) are defined independently. And a:b is set to a subconcept of the internal ratio. In addition, a:b and percentage are presented as methods to express the internal ratio. From these results, the following four implications for developing our mathematics textbooks can be presented as conclusions. First, it is necessary to limit the ratio to mean the internal ratio. Second, it is necessary to define connotatively the ratio as the internal ratio and to set it as a prior concept of a:b. Third, it is necessary to define 1% as the internal ratio 0.01. Fourth, it is necessary to define bi-ui-gap as a number for expressing a:b, when viewing a:b as the expression method of the internal ratio.