• Journal of Preventive Medicine and Public Health
• /
• 제28권3호
• /
• pp.588-608
• /
• 1995

This study was intended to enhance the level of hospital personnel management through analysing job satisfaction of hospital employees in terms of structural, personal and environmental variables. The sample of this study consist of a total of 790 persons including doctors, residents, interns, pharmacists, nurses, medical engineers, office workers and manual workers who have worked for general hospitals with 200 beds, 300 beds and 800 beds respectively. The Likert's 5 scales were used for the measurement of satisfaction. The results can be summarized as follows: 1. Structural Variables The level of satisfaction on the job itself was generally low, 2.8 in Likert's 5 scales, with the order of role ambiguity(3.87), routinization(2.6), work overload (2.45) and autonomy(2.37). Hospital employees are aware of their responsibility and they regarded their work as heavy one. The compensatory satisfaction degree was 2.5 which was also low: There were in the order stability(3.1), distributive justice(2.57), pay(2.3) and promotion(1.9). Usually hospital employees showed high degree of stability, while, their satisfaction on promotion possibility is quite low due to specially differentiated structures of hospitals. The degree of satisfaction on the internal conditions of organizational culture was relatively higher as 2.92: They were co-worker's support(3.69), supervisory support(3.15), role conflict(2.64) and welfare(2.17) in order. The satisfaction on welfare as an economic condition was the lowest. 2. Personal Variables The level of satisfaction on personal variables was 3.27 which seemed to be quite high: Contribution to the hospital(3.38), attitude on job performance(3.28) and pride as a member of the hospital(3.07). They seem to believe that their work has been helpful to the performance of hospitals. 3. Environmental Variables The degree of satisfaction on these variables was 3.07 on the average which was derived from environmental factors such as family-role conflict and community support related to hospital employees' environment. The order of satisfaction for each variable is community support(3.2) and family-role conflict(2.94). They turned out to be fairly satisfied with their job in community and yet, they wanted more spare time to spend with their family.

• 한국미생물·생명공학회지
• /
• 제9권4호
• /
• pp.197-205
• /
• 1981

Bacillus megaterium의 발효액으로 부터 페니실린 아미다제를 셀라이트에 흡착시켜 분리한 후 이 흡착효소를 아크릴아마이드에 포괄시켜 고정화하였다. 관형식 반응조에서의 이 고정화효소의 안정도는 포괄시키지 않은 흡착효소에 비해 크게 증가하였으며 최적 반응 pH는 8.7, 그리고 최적 안정도는 7.5~8.0이었고 최적온도는 5$0^{\circ}C$ 였다. Km과 6-APA, 페닐초산에 의한 저해상수는 각각 4.55mM, 36.5mM, 그리고 10.5mM이었다. Effectiveness factor값은 0.95로 내부확산 효과는 무시할 수 있었다. pH8.0의 조건에서 관형식 반응조 내에서의 효소역가의 반감기는 4$0^{\circ}C$에서 6.8일 그리고 3$0^{\circ}C$ 에서는 47일로 포괄하지 않은 흡착효소에 비해 안정도가 각각 6.8배와 12배로 증가하였다. 이 고정화 효소에 의한 회분식 및 연녹식반응조에서의 6-APA의 생산성을 논의하였다. 실험결과로 미루어 보아 특히 흡착효소를 고정화효소로 사용하는 경우에 포괄방법을 이용함으로써 효소반응조의 안정도를 크게 증가시킬 수 있음을 시사하였다.

• 한국전문물리치료학회지
• /
• 제25권1호
• /
• pp.22-30
• /
• 2018

Background: Improvement of lumbo-pelvic stability can reduce the compensatory action of the quadratus lumborum (QL) and selectively strengthen the gluteus medius (GM) during side-lying hip abduction (SHA). There are abdominal draw-in maneuver (ADIM) and abdominal bracing (AB) as active ways, and pelvic compression belt (PCB) as a passive way to increase of lumbo-pelvic stability. It is necessary to compare how these stabilization methods affect the selective strengthening of the GM. Objects: To investigate the effects of ADIM, AB, and PCB during SHA on the electromyography (EMG) activity of the GM, QL, external oblique (EO) and internal oblique (IO), and the GM/QL EMG activity ratio. Methods: A total of 20 healthy male adults participated in the study. The subjects performed three conditions in side-lying in random order: SHA with ADIM (SHA-ADIM), SHA with AB (SHA-AB), and SHA with PCB (SHA-PCB). To compare the differences among the three conditions, the EMG activities of the GM, QL, EO and IO, and GM/QL EMG activity ratio were analyzed using one-way repeated ANOVA. Results: The EMG activity of the QL was significantly higher in SHA-AB than in SHA-ADIM and SHA-PCB. The GM/QL activity ratio was significantly higher in SHA-PCB than in SHA-ADIM and SHA-AB. In addition, the figure for SHA-ADIM was significantly higher than that for SHA-AB. In the case of the EO, the figure for SHA-AB was significantly higher than corresponding values for the other two conditions. The figure for SHA-ADIM was significantly higher than that for SHA-PCB. The EMG activity of the IO was significantly higher in SHA-AH than in SHA-PCB. Conclusion: It can be suggested that wearing the PCB can more selectively strengthen the GM than to perform ADIM and AB during SHA. In addition, the ADIM can be recommended when there is a need to strengthen abdominal muscles during SHA.

• Clinics in Shoulder and Elbow
• /
• 제6권1호
• /
• pp.55-66
• /
• 2003

Background: The purpose of this study was to evaluated results of arthroscopic treatment of the traumatic recurrent unidirectional posterior subluxation. Materials and Methods: We treated twenty-seven patients who had traumatic recurrent unidirectional posterior subluxation of the shoulder by arthroscopic labral repair and posterior capsular shift and prospectively evaluated for a mean of thirty-nine months (range,24 to 85 months). Patients who had posteroinferior instability, multidirectional instability, atraumatic onset, or revision cases were excluded. There were twenty-five male and two female patients with the mean age of twenty-one years (range, 14 to 33 years). All patients were involved in sports activity. All had a significant traumatic event prior to the onset of the instability. Stability, motion, three objective measurement (UCLA, ASES, and Rowe scores) and two subjective measurements (pain and function visual analogue scale) were evaluated. Results: The most common finding in magnetic resonance image-arthrogram was separation of the posteroinferior labrum without displacement in 9 patients, In arthroscopic examination, all patients had one or more lesions in the posterior inferior labrum and capsule. The most common finding was incomplete stripping of the posterior inferior labrum (18 patients). The posteroinferior capsule subjectively appeared to be stretched in twenty-two patients. At follow-up, all patients had improved shoulder function and scores(p < 0.01). All patients had stable shoulder by subjectivel and objectivel measurements, except one patient who had recurrent subluxation. All but one patient with postoperative recurrence were able to return to their prior sports activity with little or no limitation. Twenty-four patients were graded as having more than 90％ of shoulder function. Their were twenty-one excellent, five good, and one fair UCLA. scores. Pain sore improved from 4.5 to 0.2 point(p : 0.0001). Mean loss internal rotation was one vertebral level. None had operative complications. Conclusion: In conclusion, treatment outcomes of the traumatic unidirectional recurrent posterior subluxation are consistently reliable with respect to the stability, pain relief, and functional restoration by the arthroscopic posterior capsular shift procedure.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.52-57
• /
• 2018

With the recent strengthening of environmental regulations and the need for cost reduction, excavators, a type of construction equipment, are being miniaturized while components are being developed in consideration of stability. In the case of excavator press parts, mainly high-strength steel sheets are being used to enhance stability and reduce weight. However, in the case of high-strength materials, there is a need to research product forming methods to reduce Springback in defects arising in parts assembly due to Springback that result from the internal residual stress that occurs in press forming being released after product forming. Accordingly, regarding the tank cover, an excavator press-forming part, this study selected a method to reduce distortion through analysis of the Springback occurrence rate and Springback causes through a forming analysis. A forming analysis was conducted for the Springback of the tank cover. Deformations of 13.714 mm in the upper part and 6.244 mm in the inner part of the product occurred, while wrinkles occurred on the sides of the product due to uneven thickness. A forming analysis was conducted for the major shapes of the product to investigate the causes of Springback. Distortion deformation due to the bead in the center of the product was confirmed to be a large factor. A Springback reduction method of correcting uneven thickness in the product sides, a Springback reduction method of removing the bead, and a correction method of restriking after the final forming were used in a forming analysis to determine the degree of Springback reduction. For the forming method to correct uneven thickness in the sides, deformation was reduced by 12% in the upper side compared to the existing model, but deformation in the inner side increased by 1%. For the restriking forming method, deformation decreased by 25% in the upper side and 13% in the inner side. For the bead removal method, deformation decreased by 28% in the upper side and 13% in the inner side, the largest Springback correction results. This indicates that the bead has a large affect on Springback.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.121-140
• /
• 1994

본 연구에서 경계가 불규칙하고 여러 토층으로 이루어진 자연과 인공 사면에 대한, 토층의 경계에서 굴절하는 대수나선곡선을 파괴면으로 가정한 신뢰도해석 모델을 개발하였다. 이 모델에서, 사면파괴토괴는 양 끝단이 수직평면으로 된 일정한 폭을 가진 Cylindroid로 가정하여 절편법을 적용하였고, 강도정수의 공간적인 변화, 불충분한 시료의 수에 의한 오차 그리고 실험실과 현장조건의 차이에서 오는 모델오차를 고려하여, FOSM 그리고 SOSM의 방법으로 신뢰도 지수를 구하여 파괴확률을 구하는 프로그램을 개발하였다. 이러한 연구를 기초로 다음의 결과를 얻었다: (1) 내부마찰각의 변동계수가 점착력의 변동계 수보다 민감하게 영향을 미침을 보여주었다. 따라서 대수나선파괴면의 사면안정해석에서 내부마 찰각의 불확실성이 사면안정에 더 큰 영향을 주므로 내부마찰각의 추정에 더 큰 주의를 기울여야할 것으로 사료된다. (2) 지진이 없을 경우에는, 사면폭이 증가함에 따라 전체 3차원파괴확률과 한계파괴폭은 증가하였으며, 지진이 있을 경우에는 전체 3차원파괴확률은 증가하였으나 한계 파괴폭은 전체 사면폭이 비교적 클 때, 진도가 커짐에 따라 급격히 감소하였다. (3) 지하수위는 높을수록, 전단강도와 수정계수는 작을수록 사면의 한계폭을 감소시키는 효과가 있다.

• Archives of Pharmacal Research
• /
• 제26권2호
• /
• pp.168-172
• /
• 2003

Radiation synovectomy is one of the most useful methods for treating patients with refractory synovitis because of its convenience, long-term effects, repeatability and the avoidance of surgery. In this study, we investigated the toxicity, stability and biodistribution of a rhenium-188 ($^{188}$Re)-tin colloid to evaluate its suitability as a synovectomy agent. Twenty four hours after injecting the $^{188}$Re-tin colloids (74 KBq/0.1 mL) into the tail vein of ICR mice, most of the $^{188}$Retin colloidal particles was found in the lungs. In addition, there were no particle size changes at either room temperature or at $37^{\circ}C$ after injecting the $^{188}$Re-tin colloids in human plasma and synovial fluid. In vitro stability tests showed that the $^{188}$Re-tin colloid remained in a colloidal form without a critical size variation over a 2-day period. We investigated the leakage of $^{188}$Retin colloids from the intraarticular injection site with gamma counting in New Zealand white rabbits. The $^{188}$Re-tin colloids (55.5 MBq/0.15 mL) were injected at the cavum articular and the mean retention percentage of the $^{188}$Re-tin colloid was 98.7% for 1 day at the injection site, which suggests that there was neither change in the particle size nor leakage at the injection sites. In the biodistribution study with the SD rats, the liver showed the highest radioactivity (0.0427% ID/organ) except for the injected knees (99.49%). In the SD rats, mild toxicities including the skin or a synovium inflammation were observed as a result of a radioactivity of 15 mCi/kg at the intraarticular injection site. However, there was no systemic toxicity. In the Ovalbumin (OVA)-induced arthritic rabbits, the $^{188}$Re-tin colloid improved the macroscopic, the histological score and reduced the knee joint diameter when compared to the arthritic control. In conclusion, a $^{188}$Re-tin-colloid is considered as a strong candidate for radiation synovectomy with a superior efficacy and safety.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.661-669
• /
• 2000

본 연구는 6개 관종으로 구성된 모의순환관로시스템에서 정수의 부식성을 조절하여 관로내의 부식을 저감시킬 목적으로 pH 및 알칼리도 조절 수질제어시스템을 운전하여 관로의 금속용출 저감 및 부식성 지수의 변화를 파악하고, 수질제어에 따른 다른 수질인자들 즉, 미생물, 잔류염소농도, 그리고 소독부산물(THMs) 및 이온류 등의 농도 변화를 평가하고자 하였다. 실험결과, pH 및 알칼리도 조절을 통한 수질제어시스템은 부식성 지수의 변화와 함께 금속의 용출율이 감소하였으며, 소독부산물(THMs)의 형성 및 미생물의 재성장에도 별다른 영향을 미치지 않는 것으로 나타나 수질제어에 따라 관 표면에 형성된 탄산칼슘 피막은 부식저감과 함께 관로내 수질의 안정화를 가져오는 것으로 판단된다. 따라서 pH 및 알칼리도 동시 조절을 통한 부식성 수질 제어시스템은 고형물의 침전 및 용출에 가장 큰 영향을 미치는 pH 및 TIC 등 수질인자들을 안정화시켜 전체적인 수돗물의 수질관리에 매우 효과적일 것으로 사료된다.

• 폴리머
• /
• 제28권3호
• /
• pp.239-244
• /
• 2004

윤활제 첨가에 따른 폴리(부틸렌 테레프탈레이트) [PBT]의 유변 특성 및 열 안정성 변화에 대하여 살펴보았다. 윤활제로 칼슘 스테아레이트 (CaST)와 아디프산 글리콜 폴리에스터 (AhGP)를 PBT에 첨가하는 경우 1 wt％ 첨가만으로도 용융 점도가 현저히 감소함을 알 수 있었다. 이러한 정도 감소는 AAGP의 경우, PBT 주사슬에 내부 윤활제로 그리고 CaST는 가공 기기 표면과의 윤활 특성을 향상시키는 외부 윤활제로 작용하여 발현되며, 아울러 윤활제에 의한 PBT분자량 감소에도 기인됨을 확인할 수 있었다. 또한 본 연구에서 사용한 윤활제는 PBT의 열 안정성을 저하시키는 요인으로 작용함을 알 수 있었으나 3 wt％ 이하의 CaST를 PBT에 적용하는 경우 열 안정성의 감소를 최소화 할 수 있었다. 이러한 결과로 부터 분자량 감소와 열 안정성 저하를 최소화하면서 동시에 점도를 낮출 수 있는 PBT윤활제로는 내부 윤활제보다는 외부 윤활제인 CaST가 적절함을 알 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.162-177
• /
• 2001

분자구조가 서로 다른 7종의 폴리올에스터 오일에 대한 가수분해속도가 측정되었다. 사용된 폴리올에스터는 2가 및 4가의 다가알콜과 서로 다른 탄소수의 직쇄 흑은 분기지방산으로 합성된 다가에스터 화합물이며, 이들의 가수분해반응은 p-톨루엔설폰산을 촉매로 사용하는 온건한 산성조건하에서 수행되었다 폴리올에스터 오일의 가수분해과정에서 생성되 는 부분에스터와 다가알콜 및 지방산 등의 구조가 확인되었고 반응시간의 경과에 따른 가수분해 생성물들의 농도가 측정되었다. 각 반응단계의 속도상수는 속도식과 실험적으로 얻은 각 화합물들의 농도로부터 최소제곱법에 의해 구하였고, 얻어진 가수분해 속도상수가 서로 비교되었다. 폴리올에스터 오일의 가수분해 속도는 지방산의 분자구조에 가장 크게 영향을 받는다. 즉, 직쇄지방산에 의한 폴리올에스터 오일은 분기지방산에 의한 폴리올에스터 오일보다 가수분해속도가 매우 마르며, 분기지방산에 의한 폴리을에스터 오일 중에서는 가지사슬의 모양과 위치가 가수분해속도에 영향을 미치는 것으로 확인되었다. 본연구에서 사용된 7종의 폴리올에스터 오일에 대한 가수분해속도는 물분자가 폴리올에스터 오일의 카르보닐 탄소를 공격할 때 인접한 가지사슬에 의한 입체장애효과를 비교함으로써 효과적으로 설명할 수 있다.