• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.255-260
• /
• 2021

This study tried to investigate the effects of the adaptation of middle-aged and elderly adult learners to college life on happiness. For this purpose, a questionnaire survey and analysis were conducted on 321 middle-aged and older adults studying at two-year and four-year colleges in Daegu and Gyeongbuk Province, and the results are as follows. First, college life adaptation according to the general characteristics of middle-aged and elderly learners are higher for those in their 50s and 2nd grade in good health condition. Happiness was the highest women, 60s and those in the form of households where only couples live. Second, there is a static correlation between the adaptation of middle-aged and elderly adult learners to college life and happiness, and the correlation between satisfaction with internal growth and satisfaction with meaning was the highest. Third, it was found that middle-aged and elderly adults' adaptation to college life influenced happiness, and the adaptation to adult student relationships, which is the lower part of the adaptation to college life, had the greatest impact on happiness. The above research results suggest that the various positive experiences experienced in university life can affect happiness by easing student relationships, psychological stability, and physical tension, and improving one's own satisfaction with internal growth.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.2
• /
• pp.77-83
• /
• 2003

In this research, in order to investigate the effect of hot-pressing condition, properties of bamboo zephyr boards (target density 0.7 g/cm³, 400×400×12 mm) produced by different hot-pressing time and temperature were compared through Korean Standard(KS) F 3104 and F 3113, and the results were summarized as follows: All of the boards had comparatively high values in bending properties (MOR, MOE) irrespective of hot-pressing condition, and the boards hot-pressed by 160℃ and 12 min showed the highest strength in parallel direction of board-surface to span. Internal bond (IB) strength of the boards generally increased with the increase of hot pressing temperature. Boards produced by hot pressing temperature and time of 160℃ and 12 min and 180℃ and 10 min exhibited relatively higher wet-bending strength. Thickness swelling (TS) of all the boards showed good dimensional stability of 6% or less.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.2
• /
• pp.128-133
• /
• 2021

Currently, autonomous vehicle markets are commercializing a third-level autonomous vehicle, but there is a possibility that an accident may occur even during fully autonomous driving due to stability issues. In fact, autonomous vehicles have recorded 81 accidents. This is because, unlike level 3, autonomous vehicles after level 4 have to judge and respond to emergency situations by themselves. Therefore, this paper proposes a vehicle crisis detection system(VCDS) that collects and stores information outside the vehicle through CNN, and uses the stored information and vehicle sensor data to output the crisis situation of the vehicle as a number between 0 and 1. The VCDS consists of two modules. The vehicle external situation collection module collects surrounding vehicle and pedestrian data using a CNN-based neural network model. The vehicle crisis situation determination module detects a crisis situation in the vehicle by using the output of the vehicle external situation collection module and the vehicle internal sensor data. As a result of the experiment, the average operation time of VESCM was 55ms, R-CNN was 74ms, and CNN was 101ms. In particular, R-CNN shows similar computation time to VESCM when the number of pedestrians is small, but it takes more computation time than VESCM as the number of pedestrians increases. On average, VESCM had 25.68% faster computation time than R-CNN and 45.54% faster than CNN, and the accuracy of all three models did not decrease below 80% and showed high accuracy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.54-63
• /
• 2022

This paper is a study on the friction damper, which is one of the seismic reinforcement devices for structures. This study developed a damper by replacing the internal friction material with ultra high molecular weight polyethylene (UHMWPE), a type of composite material. In addition, this study applied a multi-friction method in which the internal structure where frictional force is generated is laminated in several layers. To verify the performance of the developed multi-friction damper, this study performed a characteristic analysis test for the basic physical properties, wear characteristics, and disc springs of the material. As a result of the wear test, the mass reduction rate of UHMWPE was 0.003%, which showed the best performance among the friction materials based on composite materials. Regarding the disc spring, this study secured the design basic data from the finite element analysis and experimental test results. Moreover, to confirm the quality stability of the developed multi-friction damper, this study performed an seismic load test on the damping device and the friction force change according to the torque value. The quality performance test result showed a linear frictional force change according to the torque value adjustment. As a result of the seismic load test, the allowable error of the friction damper was less than 15%, which is the standard required by the design standards, so it satisfies the requirements for seismic reinforcement devices.

• The Korea Journal of Herbology
• /
• v.24 no.1
• /
• pp.89-98
• /
• 2009

Objectives : The purpose of this study was to evaluate effects of processed sulfur with red ginseng on streptozotocin(STZ) induced diabetic rats for expansion of processed sulfur internal application. Methods : We prepared red ginseng with non processed sulfur extracts(GS), red ginseng with processed sulfur I extracts(GPS I) and red ginseng with processed sulfur II extracts(GPS II). In the present study, we examined about contents of crdue saponin, antioxidant activity, $\alpha$-glucosidase inhibitory activity, and effects of STZ induced diabetic rats. Results : Contents of crude saponin increased by processed sulfur, and GPS II was shown highest contents in crude saponin and sulfur compared with another groups. Electron donating ability of GPS II was shown highest activity compared with GS and GPS I, SOD-like activity showed same tendency as electron donating ability at 1 $mg/m\ell$ concentration. Inhibitory activity of $\alpha$-glucosidase was approximately same level in acarbose and GPS II. Blood glucose level of GPS II group was decreased 18.34% compared with DC(diabetes control) group and maintained stability range in glucose level. but GS and GPS I showed high level compared to GPS II. Serum triglycerides concentration also showed lowest level in GPS II. The activity of ALT, AST and ALP was shown high level in diabetic induced groups, and lowest level in GPS II. Creatinine was shown non-significantly difference in each groups and GPS II was shown lowest level in BUN. Conclusions : These results suggested that processed sulfur with red ginseng have improvement effects on diabetes and internal application of processed sulfur with red ginseng have no specific toxicity in liver and kidney.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.12-20
• /
• 2023

This study presents basic data on how to secure stability by analyzing the change in tensile force of steel rod and the inclination characteristics of PSC BOX in the "Temporary fixation system using internal prestressing tendon", which is mainly applied to construction of superstructures by FCM. To date, it has been difficult to confirm the changes in tension force of the steel rod and the inclination of the PSC BOX because the steel rod was installed vertically inside the pier and the PSC BOX. Therefore, measurement of the change in length of the steel rod and the displacement of PSC BOX were performed using a micro-measured FBG sensor. Comparisons of the calculated tensile force and the residual tensile force of the steel rod revealed that the safety factor decreased in all bridges. The cause was mainly identified to be the loss of tensile force in fixation~1segment, and countermeasures are suggested. The analysis of the inclination characteristics showed that the inclination increased with the segment progresses even in bridges with sufficient safety factor, and the difference before and after the segment was confirmed. In addition, the increase in inclination was related to the loss of tension force in the steel rod, and the stress on the opposite sides of the inclination was further reduced. It is believed that upward tensile force is generated in the steel rod on the opposite side of the inclined side due to the unbalanced moment, causing the difference in stress of the steel rod between the two sides.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.1
• /
• pp.32-39
• /
• 2024

The key components of a Phosphoric acid fuel cell (PAFC) are an electrode catalyst, an electrolyte matrix and a gas diffusion layer (GDL). In this study, we introduced a microporous layer on the GDL of PAFC to enhance liquid electrolyte management and overall electrochemical performance of PAFC. MPL is primarily used in polymer electrolyte membrane fuel cells to serve as an intermediate buffer layer, effectively managing water within the electrode and reducing contact resistance. In this study, electrodes were fabricated using GDLs with and without MPL to examine the influence of MPL on the performance of PAFC. Internal resistance and polarization curves of the unit cell were measured and compared to each other to assess the impact of MPL on PAFC electrode performance. As the results, the application of MPL improved power density from 170.2 to 192.1 mW/cm². MPL effectively managed electrolyte and water within the matrix and electrode, enhancing stability. Furthermore, the application of MPL reduced internal resistance in the electrode, resulting in sustained and stable performance even during long-term operation.

• Journal of Animal Environmental Science
• /
• v.9 no.1
• /
• pp.9-18
• /
• 2003

Most of broiler houses in Korea have the trouble of environmental control such as suitability, stability, and uniformity of internal climate, resulting in serious stress on chickens. Accordingly, it is very urgent to develop optimum designs of naturally and mechanically ventilated broiler houses for Korean climate. In this study, the internal climates such as air temperature, humidity, dust, ammonia gas, and air velocity were measured at a naturally ventilated broiler house. The data were collected during summer season including local weather data. It was found that the difference between measured and optimum air temperatures was $14.0^{\circ}C$ in maximum during the summer time. The daily maximum range of internal averaged air temperature was found $10.5^{\circ}C$ while the uniformity was $5.2^{\circ}C$ in maximum. The maximum, average, and minimum internal averaged relative humidity were 89.3%, 73.7%, and 49.2%, respectively while locally measured were 95.1% and 47.2%, respectively in maximum and minimum. Considering Temperature-humidity index, during summer season, over 97% of totally rearing period was shown that counter plan is needed for thermal stress while it was very dangerous situation for 22% of the rearing period. The ammonia gas and dust concentrations were seriously affected by the broilers activity, growth level, and relative humidity.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.107-156
• /
• 2018

This article examines the history of the in - house subcontracting and the stabilization of labor - management relations in the steel industry in Japan. The ratio of in-house subcontract workers among steel workers has increased steadily until the mid-2000s, and about 70% in case of the largest company. In-house subcontracting was used as a strategy of the company to increase the quantity flexibility of employment and to save labor costs. The in-house subcontracting company needed company-specialized skills, and the internal labor market was formed because the rate of full-time workers was high and the turnover rate was low. The in-house subcontractor introduced long-term business relationship with the steel factory by introducing the equipment and materials necessary for the performance of the work, and the factory implemented the productivity improvement policy of the in-house subcontractor, and the win-win relationship between the factory and in-house subcontractor was developed. The trade union did not oppose the idea that the expansion of in-house subcontracting contributed to corporate profits, the stability of employment of the members and maintenance of their working conditions. Since 2000, the steel factory has pursued the transformation of in - house subcontractors into subsidiaries, which has been supported by capital relations. By the way, since the mid-2000s, there has been an increase in the number of regular workers' employment. The major factors are as follows: more strengthened compliance with laws and regulations, the higher quality request of customers, stricter keeping of deadlines, and problem in recruiting of workers at in-house subcontract companies. The wage gap between the factory and in - house subcontracting was less at company B than at company S, and the wage level of in - house subcontracting was about 90% of the factory at company B. The relatively small gap at company B seems to be due to the union's movement of narrowing the gap, low market dominance and unfavorable labor market. The internal labor market has been formed in the in-house subcontracting, and the wage gap is not large, and the possibility of labor disputes is low. Industrial relations are stable in the in-house subcontract company as well as the factory. The stabilization of labor-management relations in the steel industry in Korea is required to reduce the wage gap between the factory and in-house subcontract enterprises by raising productivity and expanding the internal labor market at in-house subcontract enterprises.

• The Journal of Korean Medicine
• /
• v.43 no.2
• /
• pp.51-60
• /
• 2022

Objectives: Currently, Korea's medical services are divided into Western medicine and Korean medicine, and people who are not satisfied with the existing treatments are looking for complementary and alternative medicine(CAM). Therefore, this study attempted to confirm patients' perception of the ongoing collaborative treatment and integrated medical service that added CAM to collaborative treatment based on tertiary hospital users. So that we can confirm the expected advantage and disadvantage of integrated medical service system and the necessity of supporting medical expenses for it. Methods: The survey was conducted on 100 people who experienced tertiary hospital treatment and other 100 people who experienced both tertiary hospital treatment and Korean medicine treatment at the same period. The survey was conducted until the number of respondents in both group reached 100. The survey was conducted through e-mail and was conducted from September 27, 2021 to October 8, 2021. Results: For the advantages of collaborative treatment 'increased in psychological stability,' and for disadvantages 'longer time spent for treatment' were the most common. If integrated medical services are implemented in the future, expected advantages include 'consideration of various treatments.' and expected disadvantages include 'increased medical cost.' The needs to expand support for health insurance for integrated medical services were 75.5% among responders. Conclusions: We were able to find out the (expected) advantages and disadvantages of the collaborative medical care and the integrated medical system that medical users experienced or expected, also confirmed positive answers to the expansion of health insurance support for the integrated medical system.