• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4266-4273
• /
• 2023

In a severe reactor accident, a crust will form on the surface of the molten material during the core melting process. The crust will have a contact melting with the internal components of the reactor. In this paper, the contact melting process of the molten material on the austenitic stainless steel plate bundles is studied. The contact melting model of parabolic molten material on the plate bundles is proposed, and the rule and main effect factors of the contact melting are analyzed. The results show that the melting velocity is proportional to the slope of the paraboloid, the heat flux and the distance between two plates D. The influence of melt gravity and the plate width on melting velocity is negligible. The thickness of the molten liquid film is proportional to the heat flux and plate width, and it is inversely proportional to the gravity. With the increase of D, the liquid film thickness decreases at first and then increases gradually. The liquid film thickness has a minimum against D. When the width of the plate is small, the width of the plate is the main factor affecting the thickness of the liquid film. The parameters are coupled with each other. In a severe reactor accident, the wider internal components of reactor, which can increase the thickness of the melting liquid film and reduce the net input heat flux from the molten material to the components, are the effective measures to delay the melting process.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.6
• /
• pp.578-584
• /
• 2006

A primary choriocarcinoma of the lung is extremely rare, and difficult to distinguish from a metastatic choriocarcinoma considering that the lung is also one of the most frequent sites of metastasis. We report a 28-year-old woman patient who was initially misdiagnosed with an ectopic pregnancy and was operated on under the impression of an unidentified malignancy of the lung, which was finally proven to be a choriocarcinoma of the lung. A pelvic examination by a gynecologist, pelvic magnetic resonance imaging and whole body fluorodeoxyglucose positron emission tomography-computed tomography was performed in order to rule out a metastatic choriocarcinoma of the lung. After a curative operation, her serum ${\beta}$-human chorionic gonadotropin (HCG) level, which was highly elevated in the initial evaluation, had decreased dramatically to the normal range. She is currently being followed up regularly without any evidence of recurrence or elevation of her ${\beta}$-HCG level.

• Journal of Oriental Neuropsychiatry
• /
• v.21 no.4
• /
• pp.163-173
• /
• 2010

Objectives : The objective of this study was to assess the effects of acupuncture applied at 114 and Liv3 points on heart rate variability (HRV) in normal subjects under mental stress. Methods: 36 healthy male and female subjects were recruited and randomized to a treatment group(18 subjects) or a control group (18 subjects). After 10-minutes rest period and instrumentation, both groups performed a mental stress test(Stroop color word test, Arithmetic test. four rule of arithmetic task) for l6-minutes. HRV was recorded before and after the mental stress. And then acupuncture needles were inserted on 114 and Liv3 for the study group. In the control group, they rested for l5-minutes. And Heart rate variability(HRV) was measured. Results: In the both groups, low frequency(LF) power, normalized low frequency power(LF(norm)) and ratio of low frequency to high frequency(LF/HF) was significantly increased after mental stress. Acupuncture induced significant decrease in low frequency(LF) power, normalized low frequency power(LF(norm)) and ratio of low frequency to high frequency (LF/HF) which was increased after mental stress test. In contrast, control group induced no changes. Conclusions : Acupuncture on 114 and Liv3 could be useful to decrease sympathetic activity and prevent the alteration of autonomic nervous system due to mental stress.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.1043-1054
• /
• 2004

An unsteady flow model for channel network including various internal boundaries if developed. It is a multiply-connected network model based on the Preissmann's four-point scheme and the Newton-Raphson method, where looped double-sweep algorithm is used. The model is capable of simulating flow through hydraulic structures such as dams and submerged weirs. It can also simulate automatic reservoir operation method (Auto ROM) for flood control, that is to maintain a target water level, by incorporating the strategy to the unsteady flow model as internal boundary condition. The model is applied to the Han River system that includes the downstream reaches of Choongju dam and Hwacheon dam as well as the downstream reach of the Paldang dam. Roughness coefficient for the downstream reach of Choongju dam is estimated. Automatic ROM is presumed for the Paldang, Chungpyung, Euiam, and Choonchun dams. The model is tested using historical flood records, and the flood control strategy is successfully simulated.

• The Korean Journal of Nuclear Medicine
• /
• v.22 no.1
• /
• pp.39-45
• /
• 1988

To evaluate diagnostic accuracy of liver scintigraphy we analysed liver scans of 143 normal and 258 patients with various liver diseases. Three ROC curves for SOL, liver cirrhosis and diffuse liver disease were fitted using rating methods and areas under the ROC curves and their standard errors were calculated by the trapezoidal rule and the variance of the Wilcoxon statistic suggested by McNeil. We compared these results with that of National Institute of Radiological Science in Japan. 1) The sensitivity of liver scintigraphy was 74.2% in SOL, 71.8% in liver cirrhosis and 34.0% in diffuse liver disease. The specificity was 96.0% in SOL, 94.2% in liver cirrhosis and 87.6% in diffuse liver diasease. 2) ROC curves of SOL and liver cirrhosis approached the upper left-hand corner closer than that of diffuse liver disease. Area (${\pm}$ standard error). under the ROC curve was $0.868{\pm}0.024$ in SOL and $0.867{\pm}0.028$ in liver cirrhosis. These were significantly higher than $0.658{\pm}0.043$ in diffuse liver disease. 3) There was no interobserver difference in terms of ROC curves. But low sensitivty and high specificity of authors' SOL diagnosis suggested we used more strict decision threshold.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2004

XML is becoming the standard of the new document exchanging. Due to the ablility expressing various types of document structure through XML, RosettaNet and BizTalk are using XML as a core technology in the part of e-Business. Framework is running Business process each other different standard. Internal documents in each company should be transformed differently without any loss to work with other companies. In this paper, transforming Processor based on XML mapping information from XML document information.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.2
• /
• pp.102-104
• /
• 2012

Although decompressive craniectomy is an effective treatment for various situations of increased intracranial pressure, it may be accompanied by several complications. Paradoxical herniation is known as a rare complication of lumbar puncture in patients with decompressive craniectomy. A 38-year-old man underwent decompressive craniectomy for severe brain swelling. He remained neurologically stable for five weeks, but then showed mental deterioration right after a lumbar puncture which was performed to rule out meningitis. A brain computed tomographic scan revealed a marked midline shift. The patient responded to the Trendelenburg position and intravenous fluids, and he achieved full neurologic recovery after successive cranioplasty. The authors discuss the possible mechanism of this rare case with a review of the literature.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.197-199
• /
• 2000

The various criteria to identify the disturbances of the power transformer has been reported in this paper. They have been derived through EMTP simulations of internal faults, inrush and overexcitation for the model of 154/22.9[kV], 40[MVA], Y-Y three-phase power transformer. We also propose the algorithm which makes bpa Functions and infers the final decision from them based on Modfied Dempster-Shafer's rule of combination.

• Tuberculosis and Respiratory Diseases
• /
• v.74 no.4
• /
• pp.151-162
• /
• 2013

Diffuse alveolar hemorrhage (DAH) is a life-threatening and medical emergency that can be caused by numerous disorders and presents with hemoptysis, anemia, and diffuse alveolar infiltrates. Early bronchoscopy with bronchoalveolar lavage is usually required to confirm the diagnosis and rule out infection. Most cases of DAH are caused by capillaritis associated with systemic autoimmune diseases such as anti-neutrophil cytoplasmic antibody-associated vasculitis, anti-glomerular basement membrane disease, and systemic lupus erythematosus, but DAH may also result from coagulation disorders, drugs, inhaled toxins, or transplantation. The diagnosis of DAH relies on clinical suspicion combined with laboratory, radiologic, and pathologic findings. Early recognition is crucial, because prompt diagnosis and treatment is necessary for survival. Corticosteroids and immunosuppressive agents remain the gold standard. In patients with DAH, biopsy of involved sites can help to identify the cause and to direct therapy. This article aims to provide a general review of the causes and clinical presentation of DAH and to recommend a diagnostic approach and a management plan for the most common causes.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.179-182
• /
• 2003

This research aims to establish an optimal design method of filament wound structures. So far, most design and manufacturing of filament wound structures have been based on manufacturing experiences, and there is no established design rule. In this research, possible winding patterns considering the windability and the slippage between fiber and mandrel surface were calculated using the semi-geodesic path algorithm. In addition, finite element analyses using a commercial code, ABAQUS, were performed to predict the behavior of filament wound structures. On the basis of the semi-geodesic path algorithm and the finite element analysis method, filament wound structures were designed using the genetic algorithm.