• Journal of Preventive Medicine and Public Health
• /
• v.19 no.1 s.19
• /
• pp.85-90
• /
• 1986

This study was conducted in July-August, 1984, to define the causes of chronic gastrointestinal symptoms in rural population and to provide data for the management of such patients. A household survey was conducted to identify all the residents of Youngchun and Sungiu counties in Kyungpook province who were over 20 years of age, had chronic upper gastrointestinal symptoms for over the last 6 months, never had medical examination for the symptoms, and volunteered to participate in the gastroscopic examination. Gastroscopy was done for 106 males and 108 females. Gastric ulcer was found in 16.8% of all the examinees, duodenal ulcer in 15.4%, gastritis in 14.0%, and gastric cancer in 3.7%. No lesion was found by gastroscopy in 52.3%. Gastric ulcer more common in male(26.4%) than in female(7.4%) (p<0.01) and the same was true for duodenal ulcer(20.8% of male, 10.2% of female). Gastric cancer was found in 7.5% of the male while none of the female had gastric cancer. A higher proportion of the female (68.5%) showed normal finding in the gastroscopy than the male(35.9%) (p<0.01). No significant association was found between the upper gastrointestinal symptoms and the gastroscopic findings. The higher prevalence rate of gastric ulcer than that of duodenal ulcer in this study which is the reverse of the study findings of urban area in Korea and western countries may be related in part with the dietary habit and social environment of the rural population. Although early diagnosis is the most important for the treatment of gastric cancer, many of the people with chronic upper gastrointestinal complaints defer the diagnosis and treatment. It is may be due to lack of the knowledge of diseases and the health care attitude of the rural people. A national program for the health education and mass screening for the gastric cancer should be developed.

• Journal of Veterinary Clinics
• /
• v.31 no.1
• /
• pp.1-5
• /
• 2014

Feline leukemia virus (FeLV) is a retrovirus that represents one of the most common and important infectious diseases of cats worldwide and it is responsible for more deaths among cats than any other infectious diseases. Prevalence data are necessary to define prophylactic, management and therapeutic measures for stray, feral and owned cats which are lacking in Bangladesh. The study was carried out to determine the prevalence of FeLV infection in Mymensingh district of Bangladesh using RapiGEN$^{(R)}$ FeLV Ag Test Kit (RapiGEN$^{(R)}$ Inc., Republic of Korea), a rapid one-step immunochromatographic assay. Blood samples from total 130 cats (23 owned cats and 107 unowned cats) were collected and tested following the manufacturer's instruction. An overall prevalence of FeLV infection was 1.54% (2/130). Prevalence was found 1.79% (2/112) on Day 0-up to one year aged cats (young) but no positive case was found in above 1 year (Adult) aged group. In male and female cats, the prevalence was 1.72% (1/58) and 1.39% (1/72), respectively. In un-owned cats the prevalence was 1.87%. Positive cases to FeLV were found only in clinically sick cats. No significant relationship was found according to age, sex, ownership status and health status. To the best of our knowledge this is the first report of the prevalence of FeLV infection in Bangladesh using RapiGEN$^{(R)}$ FeLV test kits which is very much effective because it is easy to apply, less expensive and quick screening of such type of infection.

• Asia pacific journal of information systems
• /
• v.21 no.1
• /
• pp.1-27
• /
• 2011

In an attempt to cope with widespread, dynamic, and accelerating changes in both internal and external business environments, companies often utilize information technologies such as SCM(Supply Chain Management). To date, SCM research has mainly focused on the effects of dynamic factors on SCM success and emphasized adoption strategies and critical success factors. Consequently, the effects of more static factors such as interdependency between SCM partners have been largely ignored. The purpose of this study, therefore, is to examine the effects of both dynamic and static factors on SCM performance by controlling for information quality and partnership quality. The five factors examined in this study include innovative ness, mutual dependency, quality of information, partnership quality, and SCM performance. All factors were examined from the perspective of part suppliers, except the mutual dependency which was examined from two aspects: supplier's dependency on customer and customer's dependency on supplier. Data was collected through five hundred survey questionnaires distributed to the part supplier companies that have implemented SCM systems for at least one year. As a result, a total of 170 valid responses were obtained. A structural equation research model was fitted using SAS 9.1.3 and SMART-PLS 2.0. The results of this study can be summarized as follows. First, innovativeness positively affected SCM information quality. SCM partnership quality, and ultimately SCM performance. The path coefficient between innovativeness and information quality was 0.387, with a t-value of 3.528. Innovativeness also had a positively direct effect on partnership quality. The path coefficient was 0.351 with a t-value of 3.366. The total effect of innovativeness on partnership quality was significant, although its indirect effect on partnership quality by altering information quality was negligible. The total indirect effect of innovativeness on SCM performance by affecting information quality and partnership quality was significant with a p-value of 0.014. Innovativeness played an important role in determining SCM performance. Second, mutual dependency showed no significant effect on SCM information quality. This result contradicts the earlier assertion that the more dependent two companies are, the more accurate and timely the information they exchange ought to be. This study showed that this may not be the case; a partner may provide information of poor quality even when it is strongly dependent on the other. Mutual dependency showed significant effect on partnership quality. However, when the mutual dependency perceived by suppliers was divided into two parts, one being a supplier's dependency on its customer company and the other being a customer's dependency on the supplier, the latter showed a significant impact on the perceived SCM partnership quality. This result indicates that a customer company can hardly improve the partnership quality perceived by suppliers by making them more dependent. It improves only when the suppliers perceive that their partners, typically having more bargaining power, are more dependent on them. The overall effect of mutual dependency of any kind on SCM performance, however, was not significant. Although mutual dependency has been mentioned as an important static factor influencing almost every aspect of cooperation on a supply chain, its influences may not be as significant as it was initially perceived to be. Third, the correlation between information quality and partnership quality was 0.448 with a p-value of less than 0.001. Information quality had a path coefficient of 0.256 to partnership quality with a t-value of 2.940. The quality of information exchanged between partners may have an impact on their partnership quality. Fourth, information quality also had a significant impact on SCM performance with a path coefficient of 0.325 with a t-value of 3.611. In this study, SCM performance was divided into four categories: product quality, cost saving, service quality, and order fulfillment. Information quality has Significant impacts on product quality, cost saving and service quality, but not on order fulfillment. Fifth, partnership quality, as expected, had a significant impact on SCM performance. The path coefficient was 0.403 with a t-value of 3.539. Partnership quality, like information quality, had positive impacts on product quality, cost saving and service quality, but showed no impact on order fulfillment. It seemed that order fulfillment is the hardest category of performance that SCM can satisfy. One major limitation of this study is that it surveyed only the suppliers. To better understand the dual aspects of SCM, it is important to survey both suppliers and the assemblers, especially in pairs. This research, to our best knowledge, was the first attempt to study the level of dependency between the two groups by measuring the dual aspects of SCM and studying mutual dependency from the categories of suppliers and assemblers each.. In the future, a more comprehensive and precise measurement of SCM characteristics needs to be achieved by examining from both the supplier's and assembler's perspectives.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.5
• /
• pp.369-374
• /
• 2008

Purpose: F-18 FDG PET/CT has excellent sensitivity and specificity for staging non-Hodgkin lymphomas, but to the author's knowledge few studies to date have evaluated FDG PET/CT in peripheral T cell lymphoma. We evaluated the usefulness of F-18 FDG PET/CT in staging of patients with peripheral T cell lymphoma, especially indolent cutaneous T cell lymphomas. Materials and Methods: Twenty five patients (M:F=17:8, age $53.7{\pm}14.8$ yrs) with biopsy-proven indolent cutaneous T cell (CL) or noncutaneous T cell lymphomas (NCL) underwent PET/CT scans for staging at baseline. Peak standardized uptake values (p-SUV) of all abnormal foci were measured and compared between cutaneous and noncutaneous lesions. F-18 FDG PET/CT was performed on 6 patients with indolent CL and on 19 patients with NCL. Results: All 6 patients with indolent CL had no significant FDG avidity in the skin despite histologically positive cutaneous lesions. However, FDG avidity appeared in extracutaneous lesions (lymph nodes) in two patients with CL where CT imaging suggested lymphoma involvement (mean p-SUV $4.26{\pm}0.37$ in noncutaneous lesions in CL). In NCL, FDG avidity was demonstrated in all lesions where CT imaging suggested lymphoma involvement (mean p-SUV, $8.52{\pm}5.00$ in noncutaneous lesions in NCL). Conclusion: F-18 FDG PET/CT has the limitation of usefulness for the evaluation of the skin in indolent CL. In contrast, F-18 FDG PET/CT is sensitive in staging evaluation of extracutaneous lesions regardless of CL or NCL.

• Journal of Hospice and Palliative Care
• /
• v.20 no.4
• /
• pp.226-234
• /
• 2017

Purpose: With the implementation of the Act on Life Sustaining Treatment, hospice-palliative care will be extended to non-cancer diseases including the acquired immunodeficiency syndrome (AIDS). However, there are concerns about negative perceptions and prejudice toward AIDS patients. The purpose of this study was to investigate factors related with willingness to volunteer (WV) for patients with end-stage AIDS among hospice volunteers. Methods: Participants were 326 hospice volunteers from 19 institutions. A self-administered questionnaire was employed to investigate the participants' WV for end-stage AIDS patients, and the questions were answered using an 11-point rating scale. Demographics, volunteer activity, satisfaction with hospice volunteering, knowledge of AIDS, and attitudes towards AIDS patients (i.e., fear AIDS patients, negative attitude towards AIDS patients, personal stigmatization and stigmatizing attitude) were also investigated. A multiple regression analysis was performed to examine factors associated with WV for patients with end-stage AIDS. Results: WV for patients with end-stage AIDS was 2.82 points lower than that for cancer patients (P<0.001). The multiple regression analysis showed that the higher the level of satisfaction with hospice volunteering (P=0.002) and the lower the level of "personal stigmatization" (P<0.001), participants showed greater WV for end-stage AIDS patients. Conclusion: The level of satisfaction with hospice volunteering and "personal stigmatization" were factors associated with participants' WV for patients with end-stage AIDS.

• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.129-134
• /
• 1993

At the Janggun mine, boulangerite usually occurs as needles or irregularly-shaped grains, up to $500{{\mu}m}$ in longer dimensions, closely associated with galena, minerals of a tetrahedrite-freibergite series and bournonite in the peripheries of South A and B orebodies and the zone of manganoan carbonates surrounding them. In some places, especially at the top of South B orebody, it occures as "feather ore" consisting of its fine needles or "hairs" in small drusy cavities together with fine-grained euhedral galena, pyrite, manganoan carbonates, quartz, etc. In reflected light, it is bluish grey in colour exhibiting moderate bireflectance and is strongly anisotropic without any internal reflections. Reflectance in air is $R_{max}=43.2$, $R_{min}=35.7$ percent at wavelength of 580 nm, and VHN: $146-173\;kg/mm^2$ at a 50 g-load. The chemical composition on the average from 23 complete spot analyses by electron microprobe is, Pb 56.1, Sb 25.1, S 18.5, Total 99.6 (all in weight percent); the corresponding chemical formula calculated on the basis of S=11 is; $Pb_{5.16}Sb_{3.93}S_{11.0}$ which fulfils approximately the ideal formula $Pb_5Sb_4S_{11}$. The strongest reflections on the X-ray diffraction pattern are; $3.73\;{\AA}\;(10)$, $3.22\;{\AA}\;(5)$, $3.03\;{\AA}\;(4)$ and $2.82\;{\AA}\;(5)$ and the pattern is in harmonic with space group $C^5_{2h}-P2_1/a$. From the textural evidence of the microscopic observations, the mineral is considered to have been formed at the latest stage of hydrothermal lead-zinc-silver mineralization.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.273-314
• /
• 2004

There is a belief in the construction industry that the traditional court system may not be an ideal forum to effectively and efficiently resolve construction disputes due to the protracted proceedings and the three tier appeal system resulting in a long delay in the final and conclusive settlement of the dispute, relatively high costs involved, the lack of requisite knowledge and experience in the relevant industry, etc. Hence, they assert that certain alternative dispute resolution ('ADR') methods, such as mediation, conciliation, arbitration or a new system for dispute settlement in the form of any combination thereof should be developed and employed for construction disputes so as to resolve them more promptly and efficiently to the satisfaction of all the disputants concerned. This paper discusses certain merits of such assertions and the need for additional considerations for effective resolution of the construction disputes in light of the complexity of the case, importance of expert witnesses, parties' relationship and non-level playing field of the construction industry and so on. At the same time, however, given the inherent nature of disputes rendering the parties involved in an adversarial position, it would rather be difficult, if not practically impossible, to satisfy all the parties concerned in the dispute. Accordingly, in this study, it is also purported to address the demerits of such assertions by studying the situation from a more balanced perspective, in particular, in relation to the operation of such ADRs. In fact, most of such ADRs as stipulated by special acts, such as the Construction Industry Basic Act of Korea, in the form of mediation or conciliation, have failed to get support from the industry, and as a result, such ADRs are seldom used in practice. Tn contrast, the court system has been greatly improved by implementing a new concentrated review system and establishing several tribunals designed to specialize in the review and resolution of specific types of disputes, including the construction disputes. These improvements of the court system have been warmly received by the industry. Arbitration is another forum for settlement of construction disputes, which has grown and is expected to grow as the most effective ADR with the support from the construction industry. In this regard, the Korean Commercial Arbitration Board ('KCAB') has established a set of internal rules end procedures in operation to efficiently handle construction disputes. Considering the foregoing, this paper addresses the most important elements of the arbitration, i.e., arbitration agreement and arbitral award, primarily focusing on the domestic arbitrations before the KCAB. However, since this parer is prepared for presentation at the construction disputes seminar for the public audience, it is not intended for academic purposes, nor does it delve into any specific acadcmic issues. Likewise, although this paper addresses certain controversial issues by way of introduction, it mainly purports to facilitate the understanding of the general public, including the prospective arbitrators on the KCAB roster without the relevant legal education and background, concerning the importance of the integrity of the arbitration agreement and the arbitral award. In sum, what is purported in this study is simply to note that there are still many outstanding issues with mediation, conciliation and arbitration, as a matter of system, institutional operation or otherwise, for further study and consideration so as to enhance them as effective means for settlement of construction disputes, in replacement of or in conjunction with the court proceeding. For this purpose, it is essential for all the relevant parties, including lawyers, engineers, owners, contractors and social activists aiming to protect consumers' and subcontractors' interests, to conduct joint efforts to study the complicated nature of construction works and to develop effective means for examination and handling of the disputes of a technical nature, including the accumulation of the relevant industrial data. Based on the foregoing, the parties may be in a better position to select the appropriate dispute resolution mechanism, a court proceeding or in its stead, an effective ADR, considering the relevant factors of the subject construction works or the contract structure, such as the bargaining position of the parties, their financial status, confidentiality requirements, technical or commercial complexity of the case at hand, urgency for settlements, etc.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.3
• /
• pp.388-402
• /
• 1996

Background : To compare the diagnostic accuracies of High-resolution CT(HRCI) and chest radiography in the diagnosis of diffuse infiltrative lung disease(DILD). Methods : This study included ninety-nine patients with a diagnosis of acute or chronic DILD, representing 20 different diseases. Twelve normal subjects were included as control. The disease state was confirmed either pathologically or clinically. Radiographs and CT scans were evaluated separately by three independent observers without knowledge of clinical and pathologic results. The observers listed three most likely diagnoses and recorded degree of confidence. Results : The sensitivity of HRCT in the detection of DILD was 98.9% compared to 97.9% of chest radiography. Overall, a correct first-choice diagnosis was made in 48% using chest radiographs and in 60% using HRCT images. The correct diagnosis was among the top-three choices in 64% when chest radiographs were used, and in 75% when HRCT images were reviewed. Overally a confident diagnosis was reached more often with HRCT(55%) than with chest radiography(26%). The correct first-choice diagnosis increased remarkably when the HRCT was used in usual interstitial pneumonia, miliary tuberculosis, diffuse panbronchiolitis and lymphangitic carcinomatosis. Conclusion : HRCT is confirmed to be superior to conventional radiography in the detection and accurate diagnosis of DILD. HRCT is especially valuable in the diagnosis of usual interstitial pneumonia, miliary tuberculosis, diffuse panbronchiolitis, and lymphangitic carcinomatosis.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.99-110
• /
• 2013

In the medical field, the necessity of education growth for the professional Radiation Technologists has been emphasized to become experts on radiation and the radiation field is important of the society. Also, in hospitals and companies, important on thesis is getting higher in order to active and cope with rapidly changing internal and external environment and a more in-depth expert training, the necessity of new teaching and learning model that can cope with changes in a more proactive has become. Thesis writing classes brought limits to the in-depth learning as to start a semester and rely on only specific programs besides, inevitable on passive participation. In addition, it does not have a variety opportunity to present, an actual opportunity that can be written and discussed does not provide much caused by instructor-led classes. As well as, it has had a direct impact on the quality of the thesis, furthermore, having the opportunity to participate in various conferences showed the limitations. In order to solve these problems, in this study, writing thesis has organized training operations as a consistent gradual deepening of learning, at the same time, the operational idea was proposed based on the connectivity integrated operating and effective training program & instructional tool for improving the ability to perform the written actual thesis. The development of teaching and learning model consisted of 4 system modeling, scaffolding, articulation, exploration. Depending on the nature of the course, consisting team following the personal interest and the topic allow for connection subject, based on this, promote research capacity through a step-by-step evaluation and feedback and, fundamentally strengthen problem-solving skills through the journal studies, help not only solving the real-time problem by taking wiki-space but also efficient use of time, increase the quality of the thesis by activating cooperation through mentoring, as a result, it was to promote a positive partnership with the academic. Support system in three stages planning subject, progress & writing, writing thesis & presentation and based on cognitive apprenticeship. The ongoing Coaching and Reflection of professor and expert was applied in order to maintain these activities smoothly. The results of this study will introduce actively, voluntarily and substantially join to learners, by doing so, culture the enhancement of creativity, originality and the ability to co-work and by enhance the expertise of based-knowledge, it is considered to be help to improve the comprehensive ability.

• Genomics & Informatics
• /
• v.18 no.3
• /
• pp.33.1-33.7
• /
• 2020

This paper describes a community effort to improve earlier versions of the full-text corpus of Genomics & Informatics by semi-automatically detecting and correcting PDF-to-text conversion errors and optical character recognition errors during the first hackathon of Genomics & Informatics Annotation Hackathon (GIAH) event. Extracting text from multi-column biomedical documents such as Genomics & Informatics is known to be notoriously difficult. The hackathon was piloted as part of a coding competition of the ELTEC College of Engineering at Ewha Womans University in order to enable researchers and students to create or annotate their own versions of the Genomics & Informatics corpus, to gain and create knowledge about corpus linguistics, and simultaneously to acquire tangible and transferable skills. The proposed projects during the hackathon harness an internal database containing different versions of the corpus and annotations.