• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.151-157
• /
• 2004

In this paper deals with behavior of the magnetic abrasive using sludge on polishing characteristics in a new internal finishing of seamless stainless steel tube applying magnetic abrasive polishing. The magnetic abrasive using sludge-abrasive grain WA and GC used to resin bond fabricated low temperature. And sludge of magnetic abrasive powder fabricated that sludge was crused into 200 mesh. The previous research have made an experiment in the static state the movement of magnetic abrasive grain is nevertheless in the dynamic state. In this paper, We could have investigated into the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

• 펄프종이기술
• /
• 제41권2호
• /
• pp.20-25
• /
• 2009

Many researches are carried out for developing the technology to substitute the surface sizing, although this process improves physical properties and water resistance of paper. This is because surface sizing has fundamental limitation to increase drying energy consumption and to restrict speed of paper machine. However, practical and effective technologies were not developed yet. In this study, we investigated the possibility of the substitution of surface sizing using internal starches, such as cationic starch and oxidized starch. To identify effects of internal starches on physical and optical properties, papers were not only made by adding internal starches into pulp slurry but papers surface sized with oxidized starch were also prepared to compare physical and optical properties. Consequently, tensile strength and internal bond of paper containing internal starches were higher than those of surface sized paper by controlling the type and addition level of cationic starch.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.115-126
• /
• 2015

In this study, we investigated influence of ground calcium carbonate (GCC) modified by washless multilayering of polyelectrolytes on paper quality. Three layers of polyelectrolytes (cationic starch/anionic polyacrylamide/cationic starch) were formed on the surface of GCC using laboratory inline washless polyelectrolytes multilayering system, which was called inline LbL GCC. Base papers were prepared with untreated GCC or inline LbL GCC using a laboratory handsheet former. These handsheets were coated with rod coater, and then printed by black ink. Properties of base paper and fold crack of coated paper were evaluated. Base paper with inline LbL GCC showed much higher mechanical strength in terms of tensile index, strain, internal bond strength, and folding endurance. The fold crack of coated paper with inline LbL GCC occurred more frequently compared to coated paper with untreated GCC. This might be due to highly improved internal bond strength of base paper, which resulted in smaller delamination that played a role of stress dissipation. It would be recommended to design a proper coating layer in order to prevent fold crack.

• Journal of the Korean Wood Science and Technology
• /
• 제45권1호
• /
• pp.62-71
• /
• 2017

본 연구는 쌀의 도정과정에서 발생되는 농업부산물인 왕겨를 탄화시켜 만든 왕겨숯을 톱밥과 혼합하여 밀도별, 수지첨가율별 및 톱밥첨가율별로 보드를 제조하고 기초물성을 측정하여 보드 재료로서의 이용가능성을 검토하였다. 수분흡수율은 수지첨가량 25%일 때 80.09%로 가장 낮은 값을 나타냈고, 밀도가 증가하고 톱밥첨가량이 감소할 때 수분흡수율이 감소하는 경향을 나타냈다. 또한 측정된 두께팽윤율은 KSF 3104 파티클보드의 품질규정에 만족시키고 있어 치수안정성 부분에서 건축내장재로 활용가능성이 확인되었다. 박리강도는 수지첨가량 25%일 때 $0.244N/mm^2$으로 KSF 3104 파티클보드의 품질기준을 만족시켰지만, 나머지 조건에서는 현저하게 낮은 값을 나타내 조건을 충족시키지 못하였다. 밀도, 수지첨가율, 톱밥첨가율이 증가할수록 경도도 증가하는 경향을 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.44-53
• /
• 1994

This research was carried out to investigate the effect of paper sludge addition on formaldehyde emission, and physical and mechanical properties of UF-particleboard. In order to investigate the effect of paper sludge addition to resin, particleboards were bonded with urea-formaldehyde resins containing 5, 10, 15% paper sludge powders of three types(A Type: -200 mesh, B Type: -100~+200 mesh. C Type: -50~+100 mesh), based on weight of resin solid. Also the effect of paper sludge addition to furnish was studied from particleboards fabricated with ratios of sludge to particle of 5:95, 10:90, 15:85 based on oven-dry weight. Tests were conducted on the manufactured particleboards to determine formaldehyde emission, bending properties, internal bond strength and thickness swelling. The obtained results were summarized as follows: The addition of paper sludge powder to resin yielded a higher pH of cured resin. Formaldehyde emission decreased with the increase of paper sludge powder addition to resin and paper sludge composition ratio to furnish. Particleboard bonded with urea-formaldehyde resin containing paper sludge powder and particleboard mixed with paper sludge have similar bending properties(MOR, MOE) and thickness swelling compared with control particleboard. Internal bond strength of particleboards treated with paper sludge were lower than that of control particleboard. The use of paper sludge as scavenger was achieved reduction of formaldehyde emission without depression of physical and mechanical properties of particleboard. Also the use of paper sludge was able to concluded that there is possibility of partial substitution of wood particle materials.

• Journal of the Korean Wood Science and Technology
• /
• 제48권3호
• /
• pp.393-404
• /
• 2020

아세틸화 처리한 라디에타소나무 섬유를 사용하여 제조한 MDF의 수분에 대한 재질 특성을 조사하고 KS F 3200의 섬유판 품질기준과 비교하였다. 아세틸화 처리 MDF는 품질 기준보다 매우 낮은 함수율과 수분 흡수성 및 두께 팽창율을 보여 우수한 치수안정성을 기대할 수 있다. 아세틸화 처리 MDF의 습윤 시 휨강도는 기건 상태 휨강도의 약 70% 이상에 달해 품질 기준에 적합하였다. 아세틸화 MDF의 습윤 시 박리강도가 품질기준의 기건 상태의 최저 박리강도보다 높은 결과를 보여 내수성이 매우 우수하였다. 아세틸화 MDF의 물방울 접촉각은 무처리 MDF에 비하여 커서 낮은 습윤성에 의한 내수성 향상에 기여하는 것으로 판단된다.

• Journal of Forest and Environmental Science
• /
• 제31권2호
• /
• pp.119-125
• /
• 2015

This study examined the effects of rice straw steaming time and mixing ratio between rice straw and wood particle on the properties of mixed particle board from Acacia mangium Willd wood and rice straw. Rice straw and Acacia mangium Willd wood were collected in Hanoi, Vietnam. The particle board was three-layer particle board with the structural ratio of 1:3:1. The thickness, density and board size of the particle board were 18 mm, $0.7g/cm^3$, and $800{\times}800{\times}18$ (mm, including trimming), respectively. A resin mixture between commercial Urea-formaldehyde (U-F) adhesive and methylene diphenyl isocyanate (MDI) adhesive was used with a dosage of 12% for the core layer and 14% for the surface layer. In this experimental design, the steaming time for rice straw was 15, 30, 45, 60, and 75 minutes at $100^{\circ}C$. The rice straw-wood mixing ratio was 10, 20, 30, 40, and 50%. The results showed that both mixing ratio and steaming time affect the properties of the particleboard, but the mixing ratio has a stronger impact. A higher mixing ratio and a longer steaming time resulted in a better quality of particleboard. The optimal steaming time for rice straw was 46.12 minutes with the straw-wood mixing ratio of 29.85% with the following characteristics of the particle board: the modulus of rupture (MOR) of 14.64 MPa, internal bond strength (IB) of 0.382 MPa, thickness swelling (TS) of 8.83%, and board density of $0.7-0.7g/cm^3$.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.86-101
• /
• 1990

The primary objective of this research was to investigate the strength properties of Comply, a composite panel. fabricated with particle board as core material and veneer or plywood as face and back. 20types of comply composites were manufactured according to the four specific gravity levels(0.5, 0.6, 0.7 or 0.8) of particleboard core and three veneer or two plywood thicknesses for face and back. They were tested and compared with matching particleboard (control) on moisture content. specific gravity, bending properties(MOE, MOR SPL). nail resistance and internal bond strength. The obtained results were summarized as follows: The increasing effect of modulus of elasticity was shown by the increase of face and back veneer or plywood thickness. The modulus of rupture and stress at proportional limit of the comply composites bonded with 3mm thick veneers or 3mm thick plywood face and back were higher than 2mm thick veneer or 2mm thick plywood as face and back. Both of modulus of rupture and stress at proportional limit on bending of Comply were higher than those of control board. Also the modulus of elasticity of Comply showed much higher than that of control board. The nail resistance of Comply, composed of plywood as face and back was higher than that of veneer. The nail resistance of control board was higher than that of Comply at Sp.Gr 0.7 and 0.8 core boards. Internal bond of Comply, composed of 1mm and 2mm thick veneer as face and back was higher than that of 3mm thick veneer. The increasing effect of modulus of elasticity was shown by the increase of shelling ratio in Comply composed of veneer and plywood as face and back. The modulus of rupture was increased by the increment of shellmg ratio in Compiy, composed of plywood as face and back. The modulus of elasticity and modulus of. rupture of comply were higher than those of particleboard(control) in effect of shelling ratio. Therefore it was concluded that the mechanical property values of Comply were clearly greater than those of particleboard(control).

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.121-127
• /
• 2002

한지제조공정(韓紙製造工程) 중(中)에서 발생(發生)하는 백색 슬러지와 흑색 슬러지를 각각 일정비율(10, 20, 30, 40%)로 목재(木材)파티클과 혼합(混合)하고 PMDI, 요소 및 페놀수지를 이용하여 목표비중(目標比重) 0.60, 0.75, 0.90 별로 복합(複合)보드를 제유(製遺)하여 기포적(機捕的) 성질(性質)을 측정한 결과 파티클보드에 한지(韓紙) 슬러지를 약 20%까지는 혼합(混合)하여 복합재(複合材)를 제조하여도 충분히 가능(可能)하리라 믿어진다.

• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.253-261
• /
• 2002

Vibrational properties of ferrocyanide complex ion, $[Fe(CN)_6]^{4-}$ , have been studied based on the force constants obtained from the density functional calculations at B3LYP/$6-31G^{\ast\ast}$ level by means of the normal mode analysis using new bond angle and linear angle internal coordinates recently developed. Vibrations of ferrocyanide were manipulated by twenty-three symmetry force constants. The angled bending deformations of C-Fe-C, the linear bending deformations of Fe-C${\equiv}$N and the stretching vibrations of Fe-C have been quantitatively assigned to the calculated frequencies. The force constants in the internal coordinates employed in the modified Urey-Bradley type potential were evaluated on the density functional force field applied, and better interaction force constants in the internal coordinates have been proposed. The valence force constants in the general quadratic valence force field were also given. The stretch-stretch interaction and stretch-bending interaction constants are not sensitive to the geometrical displacement in the valence force field.