내첨 전분을 이용한 표면사이징 대체에 관한 기초연구(제1보)

Fundamental Study on the Substitution of Surface Sizing Using Internal Starches(Part 1)

  • 김철환 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 이지영 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 백경길 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 이영록 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 정호경 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 이희진 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 곽혜정 (경상대학교 임산공학과/농업생명과학연구원)
  • Kim, Chul-Hwan (Dept. of Forest Sciences/IALS, Gyeongsang National Univ.) ;
  • Lee, Ji-Young (Dept. of Forest Sciences/IALS, Gyeongsang National Univ.) ;
  • Back, Kyung-Kil (Dept. of Forest Sciences/IALS, Gyeongsang National Univ.) ;
  • Lee, Young-Rok (Dept. of Forest Sciences/IALS, Gyeongsang National Univ.) ;
  • Chung, Ho-Kyung (Dept. of Forest Sciences/IALS, Gyeongsang National Univ.) ;
  • Lee, Hui-Jin (Dept. of Forest Sciences/IALS, Gyeongsang National Univ.) ;
  • Gwak, Hye-Joeng (Dept. of Forest Sciences/IALS, Gyeongsang National Univ.)
  • 발행 : 2009.06.30

초록

Many researches are carried out for developing the technology to substitute the surface sizing, although this process improves physical properties and water resistance of paper. This is because surface sizing has fundamental limitation to increase drying energy consumption and to restrict speed of paper machine. However, practical and effective technologies were not developed yet. In this study, we investigated the possibility of the substitution of surface sizing using internal starches, such as cationic starch and oxidized starch. To identify effects of internal starches on physical and optical properties, papers were not only made by adding internal starches into pulp slurry but papers surface sized with oxidized starch were also prepared to compare physical and optical properties. Consequently, tensile strength and internal bond of paper containing internal starches were higher than those of surface sized paper by controlling the type and addition level of cationic starch.

키워드

참고문헌

  1. Smook, A.G., Handbook for pulp & paper technologists, Ch. 18, Angus Wilde Publications Inc., p.284 (2002)
  2. Gron, J. and Rantanen, R., Surface sizing and film coating in Pigment Coating and Surface Sizing of Paper, Papermkaing Science and Technology, Vol. 11, Ch. 25, TAPPI PRESS, p.489 (1997)
  3. Glittenberg, D., Leohardt, P., Substitution of surface sizing by wet-end starch addition-Breakthrough on plant scale for coating base sheet, 2006 PTS-CHT-Symposium Proceedings, PTS Press, Munchen, pp. C14-1
  4. Lee, H.K., Shin, J.Y., Koh, C.H., Ryu, H., Lee, D.J., Sohn, C.M., Surface sizing with cationic starch: its effect on paper quality and papermaking process, TAPPI J. 1(1):34-40 (2002)
  5. Lee, J.Y., Lee, H.L., Youn, H.J., Adsorption analysis of cationic guar gum on fibers in closed papermaking systems, TAPPI J. 4(10):15-19 (2005)
  6. Peel, D.J., Surface treatments: Sizing and Pigment coating in Paper Science and Paper Manufacture, Ch. 14, Angus Wilde Puplications Inc., p.217 (1999)
  7. Scott, E.W., The Appearance Properties of Paper in Properties of paper: An Introduction, Ch. 4, TAPPI PRESS, p.69 (1989)