• 충청수학회지
• /
• 제29권4호
• /
• pp.553-563
• /
• 2016

We characterize periodicities of some characteristic matrices of cellular automata congured with rule 60 and intermediate boundary condition.

• 충청수학회지
• /
• 제28권4호
• /
• pp.545-551
• /
• 2015

We investigate periodicities of characteristic matrices of cellular automata configured with rule 60 and intermediate boundary condition.

• 충청수학회지
• /
• 제30권3호
• /
• pp.305-311
• /
• 2017

We investigate periodicities of characteristic matrices of some hybrid cellular automata configured with rules 60 and 102 and an intermediate boundary condition.

• KIEAE Journal
• /
• 제15권4호
• /
• pp.29-35
• /
• 2015

Purpose: Double skin facade is a representative advantageous passive technology of building skin in the aspect of energy saving and environment improvement, reduces heat loss with buffer space in winter season and enhances indoor air and comfort of residents by activating natural ventilation in mid-season. However, in summer season, temperature increase in the intermediate space due to solar energy from exterior transparent skin could be a potential problem; also, relatively weak buoyancy of air caused by low density difference between double-skin facade could increase cooling load as air of intermediate space in high temperature hangs. However, proof data is insufficient to objectify such phenomenon. Method: In this study, researchers surveyed air temperature of intermediate space and airflow and diagnosed its cause targeting on applied multistory facade in the building which gives thermal uncomfort to residents. Also, the researchers produced Solar-air heat transfer coefficient meter, measured thermal boundary condition of double-skin facade, and presented the result of measurement as an objectified verification material regarding overheating phenomenon in the intermediate space of double-skin facade in summer season. Result: Inefficient condition was verified that total heat increases and overheating due to insufficient natural ventilation in multistory facade. In addition, logic behind preceding research was objectified and verified regarding high temperature phenomenon in the intermediate space which could increase cooling load in summer season.

• 대한수학회지
• /
• 제34권1호
• /
• pp.87-118
• /
• 1997

This paper is concerned with a mixed Lagrangian formulation of the wiscous, stationary, incompressible Navier-Stokes equations $$ (1.1) -\nu\Delta u + (u \cdot \nabla)u + \nabla_p = f in \Omega $$ and $$ (1.2) \nubla \cdot u = 0 in \Omega $$ along with inhomogeneous Dirichlet boundary conditions on a portion of the boundary $$ (1.3) u = ^{0 on \Gamma_0 _{g on \Gamma_g, $$ where $\Omega$ is a bounded open domain in $R^d, d = 2 or 3$, or with a boundary $\Gamma = \partial\Omega$, which is composed of two disjoint parts $\Gamma_0$ and $\Gamma_g$.

• 연구논문집
• /
• 통권22호
• /
• pp.65-74
• /
• 1992

This paper aims at calculating optimum design dimensions to minimize the weight satisfied strain and stress intensity of the frame while loading maximum weight into a mechanical press in the static condition. Analysis of the frame was carried out by using the FEM, then the optimum condition was obtained by using these data. As modeling in the finite element analysis has great impact on the reliablity of analysis results, the analyzed object was selected a 150-ton mechanical press of J Company, the part little affected to structural rigidity was simplified, the load condition was considered in the only maximum load, the boundary condition was used by giving symmetric displacement due to symmetric boundary condition, the finite element was applied a linear membrane element. An intermediate processor program applied the normal ANSYS to analyze finite elements was developed, and the design sensitivity was calculated. This program was applied to the optimum design.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.85-92
• /
• 2016

The operating temperature of VHTR components is much higher than that of conventional PWR due to high core outlet temperature of VHTR. Material requirements and technical issues of VHTR reactor components which are mainly dominated by high temperature service condition were discussed. The codification effort for high temperature material and design methodology are explained. The design class for VHTR components are classified as class A or B according to the recent ASME high temperature reactor design code. A separation of thermal boundary and pressure boundary is used for VHTR components as an elevated design solution. Key design characteristics for reactor pressure vessel, control rod, reactor internals, graphite reflector, circulator and intermediate heat exchanger were analysed. Thermo-mechanical analysis of the process heat exchanger, which was manufactured for test, is presented as an analysis example.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.61-68
• /
• 1991

본 연구에서는 스프링힌지, 클램프, 단순지지, 탄성지반, 다수의 병진 및 회 전스프링 그리고 중간지지점의 조합으로 구성되어 있는 보에 대하여 우선 Hamilton원 리에 의하여 정확한 보의 특성방정식을 유도하고 모든 경계조건을 만족하는 직교다항 식을 구한 후, 스프링, 댐퍼로 구성된 여러개의 질량이 일정한 속도로 이동할 경우에 대하여 Galerkin방법과 수치적분 방법을 사용하여 동적응답을 구하였다. 또한 구속 조건 및 경계조건이 변함에 따라 동적응답에 미치는 영향을 연구하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권2호
• /
• pp.169-176
• /
• 2003

플레이트거더의 전단내력을 평가하기 위해서는 탄성전단좌굴강도가 정확히 산정되어야 한다. 현행 설계식에서는 탄성전단좌굴강도를 계산하기 위한 웨브 플레이트의 경계조건을 4변 단순지지로 가정하고 있다. 그러나 웨브와 플랜지의 경계조건은 일반적으로 단순지지이상의 구속을 가지고 있으며, 플랜지의 두께가 웨브의 두께에 비해 두꺼울수록 고정에 가까워진다. 플레이트거더에서 웨브 플레이트의 경계조건은 플랜지와 웨브의 두께비, 스티프너의 보강간격 등에 따라 달라지게 된다. 본 연구에서는 실험과 유한요소법을 통해 플랜지와 웨브의 폭비, 스티프너의 보강간격, 특히 플랜지와 웨브의 두께비에 따른 웨브 플레이트의 경계조건을 평가하여 플레이트거더의 전단좌굴게수를 제안하고자 한다.

• 천문학회지
• /
• 제42권1호
• /
• pp.9-15
• /
• 2009

A necessary condition for the formation of a filament is magnetic helicity. In the present paper we seek the origin of magnetic helicity of intermediate filaments. We observed the formation of a sinistral filament at the boundary of a decaying active region using full-disk $H_{\alpha}$ images obtained from Bi Bear Solar Observatory. We have measured the rate of helicity injection during the formation of the filament using full-disk 96 minute-cadence magnetograms taken by SOHO MDI. As a result we found that 1) no significant helicity was injected around the region (polarity inversion line; PIL) of filament formation and 2) negative helicity was injected in the decaying active region. The negative sign of the injected helicity was opposite to that of the filament helicity. On the other hand, at earlier times when the associated active region emerged and grew, positive helicity was intensively injected. Our results suggest that the magnetic helicity of the intermediate filament may have originated from the helicity accumulated during the period of the growth of its associated active region.