• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.5
• /
• pp.411-417
• /
• 2016

Theoretical IPMSM control technique is complicated, and reliability is low because of the changing parameters. Further, in case of general look-up table designing method which obtains torque characteristics (according to current and speed) or torque characteristics (according to magnetic flux through the entire control region), obtaining a precise result can be difficult and has the disadvantage taking too much time to establish a current look-up table. In this paper, the new auto maximum torque point tracking (MTPT) algorithm that automatically finds the optimum stator d - q axis electric current reference through the entire speed region is devised; consequently, it could establish a 3D look-up table with torque characteristics according to current and speed. In case of using the devised auto MTPT algorithm, the result value detailed was obtained in comparison with the generalized look-up design technique, and checked to reduce the current look-up table establishment time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.1074-1086
• /
• 2015

We Relay-assisted cellular network architecture has been developed to cover cell-edge users and to improve capacity. However, the deployment of relay stations (RSs) in cellular networks may increase the total energy consumption. Though energy efficiency has become a major concern in cellular networks, little work has studied the energy efficiency of relay-assisted cellular networks by sleep scheduling. In this paper, a distributed base stations (BSs) sleep scheduling scheme in relay-assisted cellular networks is proposed. The goal is to maximize the energy efficiency under the spectral efficiency constraint. Firstly, whether the BSs should be sleeping or active is determined by the traffic profile. Then, the transmission powers of the active BSs are optimized within the game-theoretic framework, by using an interior-point method, so as to maximize the energy efficiency. Simulation results demonstrate that the effectiveness of the proposed scheme is superior to that turning on all the BSs without sleep scheduling.

• Journal of the Korean housing association
• /
• v.27 no.6
• /
• pp.85-93
• /
• 2016

The spaces have a variety of sizes dependent upon their function and significance as well as their geometric shape. An architect Adolf Loos (1870-1933) had incorporated a correlation between the unconstrained formation of space into design. He had noticeably revealed the features of space that are unconstrained and mutually related with each other, for the space compositions among modern architects. This study is about to analyze the feature of space structure for houses of Adolf Loos through Space syntax which is the quantitative space analyzing method for the subject of his detached houses. These houses were emphasized for functional aspects of space without unnecessary decorations. Le Corbusier's Villa Savoye was analysed along with it to review a comparative point of view of his house's characteristic. Based on this, the features of the spatial structure of Loos' house were examined in conjunction with his views space as essence. A J-Graph and VGA for Adolf Loos' detached house revealed the structure's spatial characteristics in which the interior space is located deeply removed from exterior yet it is integrated as a whole. Also, it revealed that the experiments of the various spatial structures shown in Adolf Loos' detached house and European rationalist architects like Le Corbusier affected each other at the same time.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.3 s.29
• /
• pp.49-59
• /
• 1998

The damage mechanism of $Cr_2O_3$ plasma coated soda-lime glass and uncoated glass by steel ball particle impact was analyzed in this study. And the shape variation of the cracks was investigated by stereo-microscope according to the impact velocity and steel ball diameter. In order to improve the damage reduction effect by $Cr_2O_3$ coating layer, crack size was measured and surface erosion state was observed for both of two kinds of specimen after impact experiment. And the results were compared with each other. The 4-point bending test was performed according to ASTM D790 testing method to evaluate the effect of coating layer for bending strength variation. As a result, it was found that the crack size of $Cr_2O_3$ coated specimen was smaller than that of uncoated one, because of the impact absorption by interior pores in the coating layer and the load dispersion by the structural characteristic of the coating layer. For the specimens subjected to the steel ball impact, the bending strength of coated specimen was higher than that of uncoated specimen.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.43-49
• /
• 2006

In this paper, an index for the evaluation of a vehicle intake booming noise and intake sound quality were developed through a correlation analysis and a multiple factor regression analysis of objective measurement and subjective evaluation data. At first, an intake orifice noise was measured at the wide-open throttle test condition. And then, an acoustic transfer function between intake orifice noise and interior noise at the steady state condition was estimated. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 intake noise and vibration expert evaluators. Next, the correlation analysis between the psychoacoustic parameters derived from the measured data and the subjective evaluation was performed. The most critical factor was determined and the corresponding index for intake booming noise and sound quality are obtained from the multiple factor regression method. And, the optimal design of intake system was studied using the booming noise and the sound quality evaluation index for expectation performance of intake system. Conclusively, the optimal designing parameters of intake system from noise level and sound quality whose point of view were extracted by adapting comparative weighting between the booming noise and sound quality evaluation index, which optimized the process. These work could be represented guideline to system engineers, designers and test engineers about optimization procedure of system performance by considering both of noise level and sound quality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.717-719
• /
• 2009

It is addressed that traditional light systems are improper to be applied practically in the energy efficiency point of view. To overcome such drawback, advanced investigations are recently conducted for realizing remote control of several related equipments such as lights, heats, home appliances, etc. This paper proposes a novel power line communication system to effectively manage lights in which the conventional method is used without any modification. We timely control lights to reduce energy cost based on given time period.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.667-673
• /
• 2019

The performance of a wooden deck made of refractory materials that have difficulties in achieving target penetrations as stipulated in the specification and quality standards for treated wood in Korea, was assessed via a case study in this research. A wooden deck built in Jinju in 2009 was selected for this study because of its fabrication method using pressure and treated refractory materials. The penetration and retention analysis did not satisfy the domestic standard for treated wood. Inspection of the deck in 2019 revealed that the deck had been attacked by decay fungi. Cap rails showed much deeper and wider checking on their surface compared with the top and base rails, resulting in a severe fungal attack. The decking boards exhibited severe fungal decay primarily in the end parts. However, the rails and balusters without checks and posts were virtually free of fungal attack irrespective of the preservative penetration measures. Copper content in the soil 5 cm away from the deck was less than 150 mg/kg, implying that copper movement in the soil was very limited. These results suggest that the inhibition of surface propagation and the protection of end surfaces are essential factors in increasing the longevity of treated wooden decks; further, the results also showed that the deck was within an acceptable range from the point of copper contamination.

• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.305-316
• /
• 2003

Recently, an iterative algorithm for finding the interior eigenvalues of a definite matrix by CG-type method has been proposed. This method compares to the inverse power method. The given matrices A, and B are assumed to be large and sparse, and SPD( Symmetric Positive Definite) The CG scheme for the optimization of the Rayleigh quotient has been proven a very attractive and promising technique for large sparse eigenproblems for smallest eigenvalue. Also, it is very amenable to parallel computations, like the CG method for the linear systems. A proper choice of the preconditioner significantly improves the convergence of the CG scheme. But for parallel computations we need to find an efficient parallel preconditioner. Our candidates we ILU(0) in the wave-front order, ILU(0) in the multi-coloring order, Point-SSOR(Symmetric Successive Overrelaxation), and Multi-Color Block SSOR preconditioner. Wavefront order is a simple way to increase parallelism in the natural order, and Multi-coloring realizes a parallelism of order(N), where N is the order of the matrix. Another choice is the Multi-Color Block SSOR(Symmetric Successive OverRelaxation) preconditioning. Block SSOR is a symmetric preconditioner which is expected to minimize the interprocessor communication due to the blocking. We implemented the results on the CRAY-T3E with 128 nodes. The MPI (Message Passing Interface) library was adopted for the interprocessor communications. The test problem was drawn from the discretizations of partial differential equations by finite difference methods. The results show that for small number of processors Multi-Color ILU(0) has the best performance, while for large number of processors Multi-Color Block SSOR performs the best.

• Archives of design research
• /
• v.13 no.1
• /
• pp.199-207
• /
• 2000

The planning of large department store is differ from designing other spaces because it holds items to sell. To make effective selling area, those items are to be showed enough to attract potential customers. In well planned space, customers would enjoy shopping convenientiy and comfortably. There are some requirements to make those kind of space. First, the design must consider customers needs. Second. the design must show items own values effectively. And third is identity of the store. At this point entrance or lobby area would possibly take major role to imprint identity and store concept. The purpose of study is to make well planned lobby area in order to lead customers traffic patterns to effective selling spaces. The method of this study is establishing hypothesis about interior and exterior aspects which effect to traffic patterns. And build condition that helps testing the hypothesis. Through the processes mentioned above, we would possibly reach the result like, First, It is important to reserve enough lobby space to prevent oversizing of selling space and advise effective traffic patterns. Second, Organize the aspects that could cause the change of customers traffic patterns and bring those customers selling point. Third, Make useful context which can attract customers passing by.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.79-87
• /
• 2016

As 3D geospatial information is demanded, terrestrial laser scanners which can obtain 3D model of objects have been applied in various fields such as Building Information Modeling (BIM), structural analysis, and disaster management. To acquire precise data, performance evaluation of a terrestrial laser scanner must be conducted. While existing 3D surveying equipment like a total station has a standard method for performance evaluation, a terrestrial laser scanner evaluation technique for users is not established. This paper categorizes and analyzes error sources which generally occur in terrestrial laser scanning. In addition to the prior researches about categorizing error sources of terrestrial Laser scanning, this paper evaluates the error sources by the actual field tests for the smooth in-situ applications.The error factors in terrestrial laser scanning are categorized into interior error caused by mechanical errors in a terrestrial laser scanner and exterior errors affected by scanning geometry and target property. Each error sources were evaluated by simulation and actual experiments. The 3D coordinates of observed target can be distortedby the biases in distance and rotation measurement in scanning system. In particular, the exterior factors caused significant geometric errors in observed point cloud. The noise points can be generated by steep incidence angle, mixed-pixel and crosstalk. In using terrestrial laser scanner, elaborate scanning plan and proper post processing are required to obtain valid and accurate 3D spatial information.