• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.13-22
• /
• 2005

This research aimed to generate two points of daylighting application as follows: 1) providing daylight performance data with a variety of glazing materials for a large window and 2) designing and evaluating an experimental type of differentiated window. For this purpose, we compared the daylight and distribution performance of new defined type of window configuration to the conventional window counterpart with a variety of glazing materials. The comparison was made for a deep, south-facing perimeter zone with large window, without any interior obstruction. The conventional window is the base single homogeneous glass pane, where as the differentiated window uses of two different glazings; an upper daylight glazing with high visible transmission and lower view window with lower transmittal glass. The daylight performance data was translated into a ratio between outdoor illuminance and the interiors. The simulated analysis of the conventional window indicates that the interior light levels have been changed proportionally dependent on the transmittance of the applied glass. The comparison of daylight distribution analysis showed that the differentiated window has lots of photometric advantage by the optical function of upper daylight window. In particular, the contribution of higher daylight window into deep rear space must be stressed for daylighting application.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.233-245
• /
• 2007

Previous finite element studies have shown that AASHTO Standard load distribution factor (LDF) equations appear to be conservative for longer spans and larger girder spacing, but too permissible for short spans and girder spacing. AASHTO LRFD specification defines the distribution factor equation for girder spacing, span length, slab thickness, and longitudinal stiffness. However, this equation requires an iterative procedure to correctly determine the LDF value due to an initially unknown longitudinal stiffness parameter. This study presents a simplified LDF equation for interior and exterior girders of two-span continuous I-girder bridges that does not require an iterative design procedure. The finite element method was used to investigate the effect of girder spacing, span length, slab thickness, slab width, and spacing and size of bracing. The computer program, GTSTRUDL, was used to idealize the bridge superstructures as the eccentric beam model, the concrete slab by quadrilateral shell elements, steel girders by space frame members, and the composite action between these elements by rigid links. The distribution factors obtained from these analyses were compared with those from the AASHTO Standard and LRFD methods. It was observed through the parametric studies that girder spacing, span length, and slab thickness were the dominant parameters compared with others. The LRFD distribution factor for the interior girder was found to be conservative in most cases, whereas the factor for the exterior girder to be unconservative in longer spans. Furthermore, a regression analysis was performed to develop simplified LDF formulas. The formulas developed in this study produced LDF values that are always conservative to those from the finite element method and are generally smaller than the LDF values obtained from the AASHTO LRFD specification. The proposed simplified equation will assist bridge engineers in predicting the actual LDF in two-span continuous I-girder bridges.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.9
• /
• pp.55-66
• /
• 2018

This study aims to propose color affective model of indoor space by evaluating subjects' physiological responses according to the types of behavioral and affective system. 99 subjects(44 females, 55 males) in their 20s, who had no disorders in visual perception, participated in the experiment. To categorize the subjects based on behavioral and affective system, BAS/BIS scale and Affective scale were used. Color stimuli were composed of five basic colors and three tones: vivid, pale and dull tone of R, Y, G, B, P. For physiological experiment, right and left prefrontal alpha activity was measured to analyze prefrontal EEG asymmetry. Participants were exposed to fifteen color stimuli for 20 seconds each other under the positive and negative emotional condition in a research room with the natural light blocked. The results and conclusion of this study are as follows. Along with factors of behavioral and affective system, cluster analysis was carried out and four types were classified. Type A had high BAS sensitivity, especially high 'drive' trait, and showed high levels of 'anxiety' and 'anger'. Type B had low BAS sensitivity, especially low 'fun seeking' and low 'drive' trait, and showed low levels of 'anxiety' as well as low levels of 'happiness'. Type C had low BIS sensitivity and showed high levels of 'happiness' and low levels of 'sadness'. Type D had high BIS sensitivity and showed high levels of 'lethargy' and 'sadness'. As a result of EEG signal analysis of color stimuli, Type B, Type C, and Type D showed significant differences in prefrontal alpha asymmetry under the negative emotional stimuli. Type B showed more left prefrontal activation in the spaces with pale R and dull G. Type C showed more left prefrontal activation in the spaces with vivid Y and B, pale R, and dull R, G, P. Type D showed more left prefrontal activation in the spaces with vivid Y and P, pale R, Y, P, and dull R, Y, G, B, P. The group of high BAS sensitivity was not influenced by color stimuli under the emotional conditions, whereas the group of high BIS sensitivity was affected by color stimuli under the negative emotional conditions. They showed left prefrontal activation when they were exposed the spaces with vivid, pale, dull tones of Y and P wall.

• Journal of Families and Better Life
• /
• v.23 no.4 s.76
• /
• pp.101-112
• /
• 2005

The purpose of this study was to provide the design guidelines for the activity spaces in the skilled nursing facilities for the elderly through the investigation of the spatial characteristics and using behavior The researcher interviewed the staff regarding programs in 15 facilities, investigated and observed the use of the spaces from 15th of December, 2004 to 19th of February, 2005. The programs in facilities were categorized into human knowledge, arts, music, exercise, recreation, cooking gardening, religious and social activities, and those were peformed once to 4 times a day. They were conducted in the elderly individual rooms, lounges, program rooms, dining room, or(and) auditorium. The results of the study were as follows: First, investigating the activity spaces, the lounges and elderly individual rooms were mostly on the same floor so that the elderly had no big trouble in access to the lounge. The program rooms of the facilities in suburban and rural area were on the same floor as the elderly individual rooms and they were likely to combine with another usage, compared to those On city were mostly separated from the residence floor. Most of dining rooms and auditorium were on the basement or on the 1st floor. Second, in the programs by the activity spaces, elderly individual room and the program room were used more for the human knowledge and art programs with small group. The lounges were for recreation and social activities with (both of) small or(and) big group and dining rooms were mainly used for cooking programs. In auditorium, recreation, religious and social activity were performed with big group. Third, the individual rooms for the elderly had more capacity if those did not have any beds, but often had a trouble in making a passage way. The lounges needed to remove decorations and displayed furniture obstructing the passages and to arrange both of the western and eastern type of tables for the efficient use of the spaces. It took a long time in preparation of the furniture and other equipment if the program room was with another usage.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.315-322
• /
• 2012

In a tunnel, interior noise of a high speed train increases by 5dB~7dB. The reason is that the sound intensity of the acoustic field in the tunnel significantly increases by the reflected waves occurred in the closed space. Especially, the incident acoustic power largely increases on the outside of the compartment side panel and large transmission of noise is available through the side panel and the glass window. In this paper, the sound insulation strategy in the tunnel is proposed for the next generation high speed train under development. Specimens of the aluminum extruded panels, layered panels and double glazed window are manufactured and intensity transmission loss is measured according to ASTM E2249-02. Based on the measured data, problems in the sound insulation performance are diagnosed and the sound insulation strategy is reviewed on each panel and layered structures.

• Journal of Families and Better Life
• /
• v.29 no.5
• /
• pp.1-17
• /
• 2011

This study aimed to analyze health promotion villages from the perspective of therapeutic architecture, and to provide basic information for planning relevant health facilities. On the basis of a review of previous literature, the characteristics of therapeutic architecture were classified into eight categories: safety, comfort, sociality, autonomy, openness, diversity, privacy, and natural environment. Field study and observation were performed in four health promotion villages that conduct programs for lifestyle improvement, physical fitness, and treatment; these villages were also considered to have a healthy residential environment. The researcher and three assistants visited the facilities and checked utilization of space through interviews with the staff and guided tours. Basic information about the subject facilities, such as the purpose of establishment, was gathered from websites before visits. Two of the villages examined in this study had a traditional Korean wooden structure, while the other two were reinforced concrete and masonry block structures. All the facilities emphasized the use of environmentally friendly material and harmony with nature. Each site was divided into the following areas: office, residence, health/treatment, public/rest, and outdoor. The safety standards of the healing architecture were not completely satisfactory at all facilities. In particular, it was found that they lacked adequate universal design equipment. However, the healing characteristics of autonomy and diversity were strong. With regard to autonomy, the facilities allowed visitors to select indoor-outdoor moving lines and the use of front- and backyards constructed on slopes. In addition, they were equipped with many entries, staircases, void, terraces, and crossroads. The architecture was aesthetically designed using feng shui symbolism, and visitors found the scenes depicted in various spaces in the villages to be stimulating. Besides, the facilities were constructed using natural materials, had a natural indoor environment, and provided a sense of spaciousness and flexibility.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.199-207
• /
• 2003

This paper is proposed new fuzzy controller for high performance of interior permanent magnet synchronous motor(IPMSM) drive. New fuzzy controller take out appropriate amounts of accumulated control input according to fuzzily described situations in addition to the incremental control input calculated by conventional direct fuzzy controller The structures of the proposed controller is motivated by the problems of direct fuzzy controller. The direct controller generally give inevitable overshoot when one tries to reduce rise time of response especially when a system of order higher than one is under consideration. The undesirable characteristics of the direct fuzzy controller are caused by integrating operation of the controller, even though the Integrator itself is introduced to overcome steady state error in response. Proposed controller fuzzily clear out integrated quantities acrording to situation. This paper attempts to provide a thorough comparative insight into the behavior of IPMSM drive with direct and new fuzzy speed controller. The validity of new fuzzy speed controller is confirmed by response results for IPMSM drive system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.2
• /
• pp.195-202
• /
• 2016

In this study, a concept of active sound enrichment (ASE) control system was implemented and demonstrated for improving engine sound quality inside the cabin of a passenger car during acceleration. Unlike the active noise control cancels the noise for disturbance rejection, the ASE adds additional sound to the noise for tracking control. This approach requires a new algorithm to provide additional artificial sound to the original engine sound using active control strategy to achieve a target sound profile, which is predefined to satisfy required interior sound quality. The ASE algorithm was implemented in a digital controller dSPACE DS1401 and real-time control experiment was accomplished in an actual car. The ASE control results show that the actively enriched sound of each engine order against RPM tracks the target profiles precisely and quickly and improves the discontinuity, the level ratios and the sound pressure level of each engine order. Thus it is anticipated the ASE system can be applied for the improvement of the engine sound quality inside the cabin during acceleration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.555-562
• /
• 2019

This paper presents soil deformation measurement in model chamber based on photogrammetry. We created an aluminum framed acrylic model chamber with soil inside and applied photogrammetry to measure soil deformation caused by loading tests. The soil consists of 40% black and 60% regular sand to create image contrast in soil images. In preprocessing, the self camera calibration was carried out for IOPs (Interior Orientation Parameters), followed by the space resection to estimate EOPs (Exterior Orientation Parameters) using control points located along the aluminum frame. Image matching was applied to measure the soil displacement. We tested different matching window sizes and the effect of image smoothing. Experimental results showed that 65x65 pixels of window size produced better soil deformation map and the image smoothing was useful to suppress the matching outliers. In conclusion, photogrammetry was able to efficiently generated soil deformation map.

• Journal of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.33-41
• /
• 2003

Recent observations have shown that coronal magnetic fields in the northern (southern) hemisphere tend to have negative (positive) magnetic helicity. There has been controversy as to whether this hemispheric pattern is of surface or sub-surface origin. A number of studies have focused on clarifying the effect of the surface differential rotation on the change of magnetic helicity in the corona. Meanwhile, recent observational studies reported the existence of transient shear flows in active regions that can feed magnetic helicity to the corona at a much higher rate than the differential rotation does. Here we propose that such transient shear flows may be driven by the torque produced by either the axial or radial expansion of the coronal segment of a twisted flux tube that is rooted deeply below the surface. We have derived a simple relation between the coronal expansion parameter and the amount of helicity transferred via shear flows. To demonstrate our proposition, we have inspected Yohkoh soft X-ray images of NOAA 8668 in which strong shear flows were observed. As a result, we found that the expansion of magnetic fields really took place in the corona while transient shear flows were observed in the photosphere, and the amount of magnetic helicity change due to the transient shear flows is quantitatively consistent with the observed expansion of coronal magnetic fields. The transient shear flows hence may be understood as an observable manifestation of the pumping of magnetic helicity out of the interior portions of the field lines driven by the expansion of coronal parts as was originally proposed by Parker (1974).