• Journal of architectural history
• /
• v.22 no.2
• /
• pp.31-42
• /
• 2013

This study identifies the current status of hanok design process and required design information through individual survey and interview with hanok architects and builders to suggest a proposal. Current design system turns out to be a common design process not reflecting hanok's unique mechanism of production. The proposal consists of the alternative design process, 'Initial survey / Site and structural planning / Spatial layout and form / Openings, interior and exterior elements design / Detail design', containing the specialty of hanok's mechanism, and the lists of design information required in its each stage. The proposed design process also emphasizes the significance of consultation in a way of designing coordination, and classifies the specific contents for each consultation moments. The study is expected to contribute for architects including the group who are not specialized in hanok to improve the architectural quality by following the systematic design process. Also the design system provides a framework to organize the vast range of design information being recently developed in the technique-oriented area.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.3
• /
• pp.99-106
• /
• 2016

The proposed hybrid damper installs at a coupling beam and consists of a high-damping rubber (HDR) and steel pin. The proposed hybrid damper adopted a pin-lock system acts as a viscoelastic damper under wind load (small displacement) while it behaves as a hysteretic damper under earthquake load (large displacement). In this paper, the pin-lock mechanism and structural performance of the proposed hybrid damper is evaluated through experiment. Experiments were carried out with the variables which displacement, loading frequency and steel pin quantities were used. Test results showed that the pin-lock mechanism and the performance of the hybrid damper under a large displacement were verified. Also equivalent damping ratios of HDR were increasing at a small displacement as displacement amplitudes were increasing. However HDR did not depend on frequency.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.3 s.29
• /
• pp.49-59
• /
• 1998

The damage mechanism of $Cr_2O_3$ plasma coated soda-lime glass and uncoated glass by steel ball particle impact was analyzed in this study. And the shape variation of the cracks was investigated by stereo-microscope according to the impact velocity and steel ball diameter. In order to improve the damage reduction effect by $Cr_2O_3$ coating layer, crack size was measured and surface erosion state was observed for both of two kinds of specimen after impact experiment. And the results were compared with each other. The 4-point bending test was performed according to ASTM D790 testing method to evaluate the effect of coating layer for bending strength variation. As a result, it was found that the crack size of $Cr_2O_3$ coated specimen was smaller than that of uncoated one, because of the impact absorption by interior pores in the coating layer and the load dispersion by the structural characteristic of the coating layer. For the specimens subjected to the steel ball impact, the bending strength of coated specimen was higher than that of uncoated specimen.

• East Asian Economic Review
• /
• v.24 no.4
• /
• pp.313-336
• /
• 2020

In this paper, I review evidence on changing global specialization in labor-intensive exporting. Production of apparel, footwear, furniture, and related products are how many low-income countries first enter export manufacturing. Just as China's rise as a powerhouse in these goods supplanted a role previously occupied by the East Asian Tigers, the world may again be on the cusp of significant change in where labor-intensive goods are produced. China's prowess in these sectors peaked in the early 2010s; its share in their global exports, while still substantial, is now in decline. Mechanisms through which the global economy may adjust to China's graduation into more technologically sophisticated activities include expanded labor-intensive export production in other emerging economies and labor-saving technological change in products currently heavily reliant on less-educated labor. Available evidence suggests that the first mechanism is operating slowly and the second hardly at all. As a third mechanism, China may in part replace itself by moving labor-heavy factories out of densely populated and expensive coastal cities and into the country's interior. Such a transition, though still in its infancy, would mirror the decentralization of manufacturing production in the U.S. and Europe, which occurred after World War II.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.29-37
• /
• 2006

Precise control of interior permanent magnet synchronous motor(IPMSM) over wide speed range is an engineering challenge. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using learning mechanism-fuzzy neural network(LM-FNN) and ANN(artificial neural network) control. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility md numerical processing capability. Also, this paper proposes speed control of IPMSM using LM-FNN and estimation of speed using artificial neural network controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. 'The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. The back propagation mechanism is easy to derive and the estimated speed tracks precisely the actual motor speed. Analysis results to verify the effectiveness of the new hybrid intelligent control proposed in this paper.

• Journal of Korean Medical classics
• /
• v.26 no.2
• /
• pp.133-174
• /
• 2013

Objective : Malaria(瘧疾) is a disease that's main symptom is paroxysm - a cyclical occurrence of sudden coldness followed by rigor and then fever. Since the introduction of the cause and mechanism of malaria(瘧疾) in the "Suwen(素問)", including Cold malaria(寒瘧), Warm malaria(溫瘧), Heat malaria(癉瘧) and Wind malaria(風瘧), there has been over 20 different kinds of malaria, each of which are introduced in multiple medical texts. Method : Through comparison between "Suwen(素問)" and other medical texts, the categories, causes and mechanisms of malaria can be analysed and organized to overview the whole feature of it. Results & Conclusion : External pathogens of malaria(瘧疾) are wind(風), cold(寒), summerheat (暑), dampness(濕), miasmic toxin(瘴), pestilence(疫), ghost(鬼). Internal pathogens of malaria(瘧疾) are dietary irregularities(飮食不節), overexertion and fatigue(勞倦), phlegm(痰), seven emotion(七情). Malaria can be categorized into four groups according to the pathological mechanism that leads to paroxysm. They are latency of disease(伏氣), external contraction(外感), internal damage(內傷), and combination of disease(合病). Malaria-Paroxysm(瘧疾發作) occurs when the three following factors collide strongly : defense qi(衛氣), latent qi(伏邪) and external pathogen(新邪). When collision of the three factors takes place in the interior(裏), the body experiences chills. When it takes place in the exterior(表), the body experiences fever. The cyclical occurrence of Malaria-Paroxysm follows the circulation of defense qi.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.297-304
• /
• 2003

This paper presents the test results of RCS(Reinforced Concrete Steel) beam-column joint with various types of transverse reinforcements such as small-column-type transverse reinforcements, four-piece ㄱ-shape assembled hoops and four-piece ㄱ-shape welded hoops. Five interior beam-column joint specimens were tested to examine the seismic performance and the shear strengths. From the test results, it was found that all the specimens sustained their strength at large levels of story drift(${\theta}$=0.035) without significant loss of strength and stiffness. Therefore it was concluded that the seismic performance and shear strength of the proposed RCS joint are at least the same as those of the specimen with conventional reinforcing details. Also, the contribution of the outer panel to the shear strength of the joint should be evaluated by the compression strut mechanism rather than compression field mechanism.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.16 no.4
• /
• pp.25-32
• /
• 2010

Despite the growing interest in recreation as one of the ways to maintain physical and mental health in modern society, access to leisure facility is an issue for individuals with disabilities. This paper identifies inaccessible features to propose the ways to promote participation and usage of the leisure facilities for individuals with disabilities. A survey of individuals with disabilities is conducted to determine preferred leisure facilities depending on types of disabilities. The result of this survey is used to evaluate current condition of regulated National leisure facility and forest, which include barrier-free facilities (e.g. interconnecting zones, interior spaces, lavatories and other facilities), signage, approachable information kiosks, emergency egress, and detectable warnings. The common issues (e.g. guiding mechanism, accessible route, safety factors, and barrier-free facilities/services) in various types of recreational facilities (e.g. forest recreational center, spa and hot springs, Amusement Park, ski resort) were identified and analyzed.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.211-214
• /
• 2005

We performed a spatially resolved spectroscopic study of the thermal composite supernova remnant 3C 391 by the Chandra observation. Broad- and narrow-band X-ray images show a southeast-northwest elongated morphology and unveil a highly clumpy structure of the remnant. The spectral analysis for. the small-scale features indicates normal metal abundance and uniform temperature for the interior gas. The properties of the hot gas are largely in agreement with the cloudlet evaporation model as a main mechanism for the 'thermal composite' X-ray appearance, though radiative rim and thermal conduction may also be effective. An unresolved X-ray source, with a power-law spectrum, is observed on the northwest border. The equivalent width images reveal a faint finger-like protrusion in Si and S lines out of the southwest radio border.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.65-68
• /
• 2006

Experiments were performed to investigate the effects of mud-flap width on the aeroacoustic noise generation inside high-speed trains. The open-circuit type wind tunnel was used. The measurement setup was custom-built to simulate intercoach spacing. From the measurements, the characteristics of the turbulent flow after the intercoach spacing and consequent generation of aeroacoustic noise inside the cabin was investigated. Especially the effects of mud flap length on the characteristics of the characteristics of the turbulent flow were identified. The mechanism of noise generation by analyzed interactions with structure vibration characteristics and generation characteristics of blocked pressure was investigated.