• Korean Institute of Interior Design Journal
• /
• v.15 no.1 s.54
• /
• pp.88-97
• /
• 2006

The purpose of this study was to provide a guideline for the bathroom fixtures of the aged by examining current status. The study has been carried out by measuring physical size of 50 aged peoples over 65 years old and their bathroom fixture status. The results were revealed as follows; 1. The height of washstand is $0.46\~0.52$ time of person's height. Adequate height of wash stand is proposed as $74\~80$ cm. The height of current market available wash stand is very close to the proposed size. 2. The height of toilet is $0.23\~0.27$ time of person's height. Adequate height of toilet is proposed as $38\~41$ cm. The height of current market available toilet is also very close to the proposed size. 3. The height of bathtub is $0.26\~0.35$ time of person's height. Adequate height of bath tub is proposed as $45\~49$ cm. The proposed height is higher than that of current bath tub available in the market. However, it should be noted that the proposed height is the sum of bath tub it self and elevation during actual installation. As stated above, it is revealed that the physical dimensions of the bathroom fixtures in the current market are properly sized. However, to draw more practical guideline for the bathroom fixture, more studies including actual experimentation will be required in the future.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.24-31
• /
• 2002

The purpose of this study was to analyze the transition on architectural data such as valid indoor length, module, ratio of core, floor height, ceiling height and the type of structured cabling system according to the intelligent building grade through case study of the intelligent office buildings constructed in Korea since 1980. The results of this study were as follows. The average floor height was 3.80m, and it was higher in proportion to the IB grade. The average ceiling height was 2.57m, and it didn't have connection with the IB grade. The module of high frequency in application was $3.0{\times}3.0m$, and it showed 25% in the application frequency. The average valid indoor length was 12.27m. The average ratio of core was 24.49%. The type of high frequency in application for the structured cabling was Access Floor Type, and it showed 31% in the application frequency.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.178-181
• /
• 2005

The positioning accuracy of the Global Positioning System (GPS) has been improved considerably during the past two decades. The main error sources such as ionospheric refraction, orbital uncertainty, antenna phase center variation, signal multipath, and tropospheric delay have been reduced substantially, if not eliminated. In this study, the GPS data collected by the GPS receivers that were established as continuously operating reference stations by International GNSS Service (IGS), Ministry of the Interior (MOl), Central Weather Bureau (CWB), and Industrial Technology Research Institute (ITRI) Of Taiwan are utilized to investigate the impact of atmospheric water vapor on GPS positioning determination. The surface meteorological measurements that were concurrently acquired by instruments co-located with the GPS receivers include temperature, pressure and humidity data. To obtain the influence of the GPS height on the proposed impact study. A hydrodynamic ocean tide model (GOTOO.2 model) and solid earth tide were used to improve the GPS height. The surface meteorological data (pressure, temperature and humidity) were introduced to the data processing with 24 troposphere parameters. The results from the studies associated with different GPS height were compared for the cases with and without a priori knowledge of surface meteorological measurements. The finding based on the measurements in 2003 is that the surface meteorological measurements have an impact on the GPS height. The associated daily maximum of the differences is 1.07 cm for the KDNM station. The impact is reduced due to smoothing when the average of the GPS height for the whole year is considered.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.3 no.1
• /
• pp.29-38
• /
• 2003

The articles on building height limitation are very important to form buildings to be. The application of the articles is based on the surface of the building site ground, that is, the definite judgment of ground level should ensure the correctness of building height limitation. This study surveyed the recognition degree of practitioners about the building height limitation regulations by questionnaires, and analyzed its results and compared them to related building laws and letter of reply from the office to practitioners' inquiry on related regulation. The study summarized the results as follows; 1. It is not clear to judge the ground level. Especially in cases of pilotis structure, there would be various interpretations to define its ground level. 2. According to present building regulations, the site would be confused to define by practitioners whether it is stiff or plain. 3. In case of regulation of a right to enjoy sunshine, it is hard to calculate the average horizontal level(ground level) with neighboring sites. 4. If there were a manual with illustrations for judging and calculating the ground level of various cases, civil petitions would be reduced.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.3 no.1
• /
• pp.39-49
• /
• 2003

The height provisions, by the urban planning, describe the hightest height per width division, also define oblique line limitation by road without mentioning the highest per width division. Therefore this study will be a basic model for the standard of measuring the highest height per width division analysizing the propriety of current standard of oblique limitation. This technique is prepared to prevent the confusion and to complements the existing planning method. Therefore, it takes more time to establish this new method and to apply it to the existing condition. This study reviewed density control in District Units Plan, based on the guidelines of density, which included height, ratio of total floor to ground area, and land distribution. This study aims to provide efficient analysis by using current oblique limitation provisions Thus, proving the area rations of general residential areas are decreasing. Since the purpose of the District Units Plan is to avoid confusion and help ease the existing problematic conditions which have risen from the two above-mentioned conventional systems, further observation and research on these areas are necessary.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.106-113
• /
• 2012

A study on techniques to evaluate auditorium assignment visible efficiency using three-dimensional simulation. The most important thing to be considered is to ensure the visibility to the podium upon assigning auditorium of venues, classrooms or seminar rooms. However, since there are so many variables to be considered such as the form of the stage, the area and height of the stage, size of screen, and the distance and angle of the auditorium from the podium, the methods to assign auditorium are staying at the level of basic for a long time. Thus, in this study, we proposed simulation methodology to quantitatively evaluate the three-dimensional visible efficiency based on Visual Graph Analysis (VGA) theory. After analytical methodology manufactures application, it sets examples of visibility depending on location of screen, visibility depending on degree of height difference and visibility about three-dimensional Mass Zoning like a stage and verifies the efficacy. In addition, based on results, visibility expectation curve is drawn and the method to calculate the stepped height depending on necessary visibility is proposed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.1
• /
• pp.23-33
• /
• 2003

The purpose of this study is to analyse six different factors of water space that influence interior landscape architecture of officers and commercial spaces. Six different factors of water space that influence interior landscape architecture are the height of the water space, the design form, the blending with the location environment, location, general satisfaction with the water space, and general satisfaction with whole space. The results of this study are as follows: 1. Water space of commercial space was bigger than office space. The satisfaction is the highest in 0∼0.6M(B2) of office space and 3.5M(C6) of commercial space. The cascade form in the office space and large water volume design in commercial areas, which supplies abundant sound and water volume, were the highest. 2. In the analysis of preferences, the design form and the general design of the office space influences satisfaction levels. The height of the water space, and a combination of other factors influence general satisfaction. Water space influences commercial areas in higher degrees. 3. The items were most desired or satisfactory for interior landscape architecture were a cascade, water fall, and small water fountain. 4. A place introduced with water space had higher satisfaction levels. Water space produces higher than general satisfaction and indicates water, space alone cannot make general interior space satisfactory, although it can make interior landscape architecture space satisfactory. 5. There is more general satisfaction in commercial space than in office space. 6. The design of water space influences overall satisfaction: a rest area of office space needs an impressive and aggressive approach, while the office space should harmonize with its surroundings, as a commercial space.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.53-54
• /
• 2006

Recently with increasing interest in the operation of life cycle, building remodeling business is spreading like a fashion. Keeping pace with the trend, the present project carried out the remodeling of an existing neighborhood facility into a religious facility based on the concepts of remodeling, reform and renovation. Basic requirements were overcoming spatial limitations, solving structural problems, meeting various functional needs, and securing a spatial size, and the project designed the interior of the building according to these requirements suggested by the owner. To overcome the low floor height of the existing space, the main sanctuary on the 1st floor had the ceiling in the form of a slant and installed indirect lighting into the resulting gaps, maximizing the depth and width of the space visually. The subsidiary sanctuary on the first basement was finished with red bricks, forming an arch using the bricks, to create religious atmosphere. However, considering the low floor height as in the 1st floor and the ceiling even lowered by the arch structure, the arch was formed threefold and the radius of the curvature of the arch was enlarged to secure a spacious feeling. The outer appearance was finished with granite on existing structure to save the cost of construction. In addition to the use of the finishing material, the structure of the arch and the frame of the opening part and the finishing of the walls were expressed with uneven surface in order to avoid the plainness of the appearance.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.157-158
• /
• 2007

This is an interior design for a furniture & lighting design exhibition. The concept of design is to secure the smooth flow planning of an audience and effective direction of an exhibit Design content include 1) installation(passage of light) to guide an audience from entrance to right side of the exhibition space to prohibit the flow dispersion and keep smooth continual circulation flow plan 2)image-wall to introduce exhibition 3)installation to help the global understanding of exhibit 4)exhibition stand design considering proper height of audience's eye.

• Fire Science and Engineering
• /
• v.20 no.2 s.62
• /
• pp.14-20
• /
• 2006

The aim of this study is to predict the ignition times and the HRR(heat release rate) for building interior materials. By using the literature data and RSM(response surface methodology), the new equations for predicting the ignition time and the HRR of building interior materials are proposed. The A.A.P.E.(average absolute percent error) and the A.A.D.(average absolute deviation) of the reported and the calculated ignition times by means of the thickness and the density were 4.35 sec and 1.57 sec, and the correlation coefficient was 0.987. The correlation coefficient of the reported and the calculated the net HRR by means of burner width and power was 0.983. Also the correlation coefficient of the reported and the calculated the total HHR by means of burner width and power was 0.999. The correlation coefficient of the reported and the calculated the maximum flame height by means of burner width and power was 0.999. The values calculated by the proposed equations were in good agreement with the literature data.