• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.121-127
• /
• 2018

A system for diagnosing surface defects of long and large pipe inner overlay welds, 1m in diameter and 6m in length, was developed using a Liquid Penetrant Test (PT). First, CATIA was used to model all major units and PT machines in 3-dimensions. They were used for structural strength analysis and strain analysis, and to check the motion interference phenomenon of each unit to produce two-dimensional production drawings. Structural strength analysis and deformation analysis using the ANSYS results in a maximum equivalent stress of 44.901 MPa, which is less than the yield tensile strength of SS400 (200 MPa), a material of the PT Machine. An examination of the performance of the developed equipment revealed a maximum travel speed of 7.2 m/min., maximum rotational speed of 9 rpm, repeatable position accuracy of 1.2 mm, and inspection speed of $1.65m^2/min$. The results of the automatic PT-inspection system developed to check for surface defects, such as cracks, porosity, and undercut, were in accordance with the method of ASME SEC. V&VIII. In addition, the results of corrosion testing of the overlay weld layer in accordance with the ferric chloride fitting test by the method of ASME G48-11 indicated that the weight loss was $0.3g/m^2$, and met the specifications. Furthermore, the chemical composition of the overlay welds was analyzed according to the method described in ASTM A375-14, and all components met the specifications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.921-928
• /
• 2003

This paper propose a new design of directional couplers with the high directivity. The directional coupler is used to check and verify the power, frequency and antenna reflection of a signal at transmission station for the mobile communications. The performance index of the directional coupler is to which the coupling is strong to reduce the effect on the transmitted power and the directivity is high to suppress the interference of the reflected signals and reduce the nor in the communication. Then, the architectures to gain the high directivity and the studies to get the strong coupling have been proposed However, the conventional architectures lot the high directivity and strong coupling have the directivity by about 20㏈ and the difficulty to achieve the higher directivity than 40㏈ suitable for IMT-2000 [1]. This paper proposes an architecture of the directional coupler which is based on the grounding composed of the strip lines and the comparison results with the conventional directional couplers. The comparison results show that the proposed directional coupler has the directivity more than 40 ㏈ and is adequate for the 2.05GHz IMT-2000

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.125-133
• /
• 2016

As one of solutions to pursue the efficient use of spectrum resource, we proposed the methodology for the co-channel multi-site radar operations with the synchronous GPS clock. The proposed algorithm, based on a quasi orthogonal property, find a candidate set of the time shifted linear frequency modulation(TSLFM) signals with the minimum acceptable level of the correlation among selected TSLFM signals. To check suggested algorithm, numerical analysis for several radars operating in the same channel with a sawtooth waveform has been performed by using range-Doppler processing for the given system parameters, and computational results are presented and examined in terms of range profile and doppler shift for a targets with velocity and distance. Simulated results have a good agreement with assumed target distance and its velocity, within the error of resolution.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.6
• /
• pp.1128-1137
• /
• 2012

Objectives : The purpose of this study was to identify the factors that affect working environment related musculoskeletal subjective symptoms among dental hygienists. Methods : The subjects in this study were 232 dental hygienists working at dental clinics and general hospitals in Daegu. The data has collected through the self-questionnaire survey from July 9th 2012 to July 31th. Results : 1. Musculoskeletal subjective symptoms were 85.3% in shoulder(right), 81.9% in neck, 74.6% in shoulder(left), 65.5% in wrist(right), 56.5% in lower leg(right). 2. Pain frequency of musculoskeletal subjective symptoms were the highest 24.7% in neck. Seeing the severity pain was the highest 9.0% in foot(left). The investigation of work interference related to substantially pain showed the highest 18.5% in wrist(right). 3. Musculoskeletal subjective symptoms correlated with general characteristics such as age, marital status, regular exercise and medical check-up(p<.05). 4. Musculoskeletal subjective symptoms correlated with working environments such as working career, the night treatment, the average daily number of patients handled, the average daily standing work hours, the regular rest, the major job in work place and physical burden(p<.05). Conclusions : The education or program on wrong working habits and bad postures of dental hygienists is needed to prevent musculoskeletal disorder.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.159-166
• /
• 2012

We have developed a daytime measuring rotational Raman LIDAR system for temperature measurement. To decrease the background signal from sunlight, we have designed and installed narrow band (0.5 nm) and high rejection ($10^{-6}$) rate band pass filter system using a grating and an interference filter. We calibrated our system by comparing our horizontal temperature profile and KMA (Korea Meteorological Administration) data. We have found that our temperature profile has a good correlation with KMA data within our theoretically expected variance. And we have used these calibration values in obtaining a vertical temperature distribution. To check our system, we also have compared our vertical temperature data with US standard atmospheric temperature profile. We also have compared our temperature profile with sonde data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.38-46
• /
• 2011

In this paper, we propose a calculation methodology of the service distance to assure the satisfactory quality of service for analogue and digital TV receivers. Using the field strength formulation for TV receiver based upon Rec. ITU-R P.1546, computational results are presented and discussed for both systems, and some important factors are reviewed in terms of the equivalent level of service, which must be kept due to ATV to DTV conversion. The presented method provides the predicted values of field strength at receiver areas to check whether transmission quality can be satisfied or not, and it can be also used for obtaining the protection ratio or separated distance from co-channel or adjacent interference signal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.381-382
• /
• 2015

Small devices such as MLCC, sample inspection on the processing is not easy. If you can proceed with the sample inspection, the production process will be able to maximize the MLCC production efficiency. In this study, to minimize the interference of operator, and to maximize the operating efficiency of the equipment. Use image processing techniques for its extracts the position and angle of the MLCC. Implements an automatic inspection system with the high productivity.It is possible to inspect the final six MLCC devices. And once we Pick-Up to 200 Chip to check the accuracy of 98.4%. Based on the results of various studies are in progress to be expected to be applicable to the automatic inspection equipment side development of a variety of small devices.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.440-449
• /
• 1988

Small vibration displacements may be measured by optical interferometers, based on the Michelson method. The standard Michelson interferometer works well when the mirror displacements are relatively large compared to the optical wavelength. But it does not work for displacements less than approximately a quater of optical wavelength. Several multiple reflection laser interferometers, simply modified standard Michelson interferometer, have been developed to decrease the minimum detectable limits. Among these a relatively simple and easy multiple reflection system is used to measure the small vibration displacements. This multiple reflection system is constructed with a right angle prism and a convex lens. Therefore this system makes it possible to measure a vibration displacement of the small area on the vibrating structure. The fringe interpolation method and curve fitting method are used to determine accurately the small vibration displacements from the measured interference fringe patterns. Also computer simulation technique is used to check the accuracies of these method. According to the results of the computer simulation technique, the curve fitting method is more accurate than the fringe interpolation method. The optically measured results are in good agreement with those of the standard accelerometer with high accuracy and it is possible to measure the peak vibration displacement as small as 9.01nm using multiple reflection system and curve fitting method.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.21-29
• /
• 1996

Industrial equipment, such as power plant, is required to operate reliably, continuously and economically under rather severe conditions of temperature, stress, and enbironment. To test structural integrity and fitness, ultrasonic nondestructive testing is used because of effectiveness and simplicity. In this paper, wavelet transform based least mean square(LMS) algorithm is applied to reduce the influence of the interference occurring between randomly positioned small scatters. The RUN test is performed to check the nonstationarity of the speckle noise signal. The performance of this new approach is compared with that of the time domain LMS algorithm by means of condition numbers, signal-to-noise ratio and 3-D image. As a result, the wavelet transform based LMS algorithm shows better performance than the time domain LMS algorithm in this experiment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.3-7
• /
• 2017

Holographic data storage system (HDSS) features short access times, high storage capacities, and fast transfer rates, since the data is recorded and read not by lines but by pages within a volume of holographic material. Burst error caused by physical impact on the high density storage system becomes very longer than that of conventional storage systems. This paper proposes an LDPC product code using two LDPC code to resolve burst error. When a total code rate is similar, the performance of two LDPC code having high code rate is better than that of one LDPC code having low code rate. Also, with error factors of two-dimensional intersysbol interference and misalignment, the proposed scheme can improve the performance in holographic data storage system.