• 한국전산유체공학회지
• /
• 제14권1호
• /
• pp.35-44
• /
• 2009

To adequately analyze flows in pipe or duct network system, traditional node-based junction coupling methods require the junction loss which is specified by empirical or analytic correlations. In this paper, a new finite volume junction coupling method using a ghost junction cell is developed by considering the interchange of linear momentum as well as the important wall-effect at junction without requiring any correlation on the junction loss. Also, boundary treatment is modified to preserve the stagnation enthalpy across boundaries, such as pipe-end and the interface between junction and branch. Also, the computational accuracy and efficiency of the Godunov-type finite volume schemes are investigated by tracing the total mechanical energy of rapid transients due to sudden closure of valve at downstream end.

• 소성∙가공
• /
• 제8권3호
• /
• pp.284-293
• /
• 1999

The rigid-plastic finite element analysis requires a large amount of computation time due to its non-linearity. For economic computation, mismatching refinement, and efficient domain decomposition method with different mesh density for each sub domain, is developed. A modified velocity alternating scheme for the interface treatment is proposed in order to obtain good convergence and accuracy. As a numerical example, the axisymmetric extrusion process is analyzed. The results are discussed for the various velocity update schemes form the viewpoint of convergence and accuracy. The three-dimen-sional extrusion process with rectangular section is analyzed in order to verify the effectiveness of the proposed method. Comparing the results with those of the conventional method of full region analysis, the accuracy and the computational efficiency of the proposed method are then discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.355-358
• /
• 1987

A design of digital position control system with DC Motor is presented. The digital position control system is constructed by power circuits, interface circuits and control circuits using single chip microprocessor (8096). All control functions are implemented on the 16 bit micro-processor requiring only on incremental encoder for speed and position sensing. The control schemes are used by the proportional control for some modifications and braking algorithms. This digital position system offered to the fast response, good steady-state accuracy, flexibility and reliability, Hardware, software features and experimental results of this system are described.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2282-2288
• /
• 1998

상용 ATM 기술은 전송로 상태가 극히 양호한 광섬유의 사용을 전제로 한 전송 방식이기 때문에 군 통신과 같이 전송로의 특성이 나쁜 무선 환경에 적응하기에는 문제가 있다. 본 연구에서는 이러한 문제를 해결하기 위해 먼저 상용 ATM 프로토콜을 높은 BER 환경에 적용할 때 나타나는 ATM 셀 전달 특성을 정량적으로 파악하였다. 시뮬레이션을 통하여 무선 환경에 상용 HEC 알고리즘과 에러 제어 방식을 적용할 수 잇는지 여부를 분석하였다. 그리고, 이러한 결과를 토대로 상용 ATM 프로토콜을 무선 환경에 적용하기 위해 필요한 개선 방향을 제시하였다.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1235-1241
• /
• 2006

A new hydrocode which is still under development using Lagrangian, Eulerian and arbitrary Lagrangian-Eulerian operators, has been described. The three operators are implemented into a single framework by incorporating the sequential three stages of Lagrangian, remesh and remap stages. Several numerical schemes used for each operator are discussed briefly in this paper. In order to evaluate the characteristics of each operator, the Taylor Impact Test has been simulated using each operator and the results are compared. Currently the code is 1st order accuracy in the material interface tracking algorithm and can not handle multimaterial in the mixed cell. The areas of possible enhancement of the code are also discussed.

• Journal of Power Electronics
• /
• 제2권1호
• /
• pp.25-31
• /
• 2002

Servo drives with microcomputer control provide the possibility of using modern and sophisticated control algorithms. As an additional feature it is possible to implement parallel and/or redundant software and hardware structures to realise safe motion or similar security functions. Unfortunately microcomputer control also has some impact on the behaviour of servo drives. Control algorithm, cycle time, sensors and interface have to be perfectly synchronised. Special control schemes are necessary on the line side (power supply) to meet the actual requirements concerning EMC. This contribution presents experiences and results obtained from a modern digital drive system pointing out the influences of low and high accuracy position sensors and the interdependencies mentioned above.

• KIEE International Transactions on Power Engineering
• /
• 제4A권2호
• /
• pp.51-57
• /
• 2004

This paper describes the dynamic performance of a variable speed wind turbine system responding to a wide variety of wind variations. Modeling of the wind generation using power electronics interface is proposed for dynamic simulation analysis. Component models and equations are addressed and their incorporations into a transient analysis program, PSCAD/EMTDC are provided. A wind model of four components is described, which enables observing dynamic behaviors of the wind turbine resulting from wind variations. Controllable power inverter strategies are intended for capturing the maximum power under variable speed operation and maintaining reactive power generation at a pre-determined level for constant power factor control or voltage regulation control. The components and control schemes are modeled by user-defined functions. Simulation case studies provide variable speed wind generator dynamic performance for changes in wind speed

• International Journal of Contents
• /
• 제9권3호
• /
• pp.29-34
• /
• 2013

This study attempted to compare usability of auditory interfaces, which is a comprehensive concept that includes safety, utility, effectiveness, and efficiency, in personal computing environments: verbal messages (speech sounds), earcons (musical sounds), and auditory icons (natural sounds). This study hypothesized that verbal messages would offer higher usability than earcons and auditory icons, since the verbal messages are easy to interpret and understand based on semiotic process. In this study, usability was measured by a set of seven items: ability to inform what the program is doing, relevance to visual interfaces, degree of stimulation, degree of understandability, perceived time pressure, clearness of sound outputs, and degrees of satisfaction. Through the experimental research, the results showed that verbal messages provided the highest level of usability. On the contrary, auditory icons showed the lowest level of usability, as they require users to establish new coding schemes, and thus demand more mental effort from users.

• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.42-50
• /
• 2004

This paper describes a new approach to Internet host mobility. We argue that local mobility, the performance of existing mobile host protocol can be significantly improved. It proposes Fast Moving Detection schemethat based on neighbor AP channel information and moving detection table. And, it composes Local Area Clustering Path (LACP) domain that collected in AP's channel information and MN interface information. It stored the roaming table to include channel information and moving detection. Those which use the proposal scheme will need to put LACP information into the beacon or probe frame. Each AP uses scheme to inform available channel information to MN. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of theburst blocking probability and the link utilization.

• Advances in aircraft and spacecraft science
• /
• 제9권6호
• /
• pp.507-523
• /
• 2022

This study is aimed to accurately predict the vibration response of two types of functionally graded sandwich plates, one with FGM core and another with FGM face sheets. The gradation in FGM layer is quantified by exponential method. An efficient zig-zag theory is used and the zigzag impacts are established via a linear unit Heaviside step function. The present theory fulfills interlaminar transverse stress continuity at the interface and zero condition at the top and bottom surfaces of the plate for transverse shear stresses. Nine-noded C-0 FE having 8DOF/node is utilized throughout analysis. The present model is free from the obligation of any penalty function or post-processing technique and hence is computationally efficient. Numerical results have been presented on the free vibration behavior of sandwich FGM for different end conditions, lamination schemes and layer orientations. The applicability of present model is confirmed by comparing with published results. Several new results are also specified, which will serve as the benchmark for future studies.