유동망 시스템 해석을 위한 경계처리에 대한 보존형 유한체적법

CONSERVATIVE FINITE VOLUME METHOD ON BOUNDARY TREATMENTS FOR FLOW NETWORK SYSTEM ANALYSES

  • 홍석우 (서울대학교 대학원 기계항공공학부) ;
  • 김종암 (서울대학교 기계항공공학부)
  • 발행 : 2009.03.31

초록

To adequately analyze flows in pipe or duct network system, traditional node-based junction coupling methods require the junction loss which is specified by empirical or analytic correlations. In this paper, a new finite volume junction coupling method using a ghost junction cell is developed by considering the interchange of linear momentum as well as the important wall-effect at junction without requiring any correlation on the junction loss. Also, boundary treatment is modified to preserve the stagnation enthalpy across boundaries, such as pipe-end and the interface between junction and branch. Also, the computational accuracy and efficiency of the Godunov-type finite volume schemes are investigated by tracing the total mechanical energy of rapid transients due to sudden closure of valve at downstream end.

키워드

참고문헌

  1. 2005, Boulos, P.F. et aI., "Hydraulic Transient Guidelines for Pretecting Water Distribution Systems," Journal of AWYVA, Vol.97, pp.111-124
  2. 2006, Baron, A. et aI., "High-speed trains: Prediction of micro-pressure wave radiation from tunnel portals," Journal of Sound and Vibration, Vol.296, pp.59-72 https://doi.org/10.1016/j.jsv.2006.01.067
  3. 2003, Zhang, G.Q. and Assanis, D.N., "Manifold Gas Dynamics Modeling and Its Coupling With Single-Cylinder Engine Models Using Simulink," J Eng. Gas Turbines and Power, Vol.125, pp.563-571 https://doi.org/10.1115/1.1560708
  4. 1998, Guinot, V., "Boundary Condition Treatment in 2$\times$2 Systems of Propagation Equations," Int. J. Numerical Methods in Engineering, Vol.42, pp.647-666 https://doi.org/10.1002/(SICI)1097-0207(19980630)42:4<647::AID-NME376>3.0.CO;2-U
  5. 1984, Osiadacz, A., "Simulation of Transient Gas Flows in Networks," Int. J. Numerical Methods in Fluids, Vol.4, pp.13-24 https://doi.org/10.1002/fld.1650040103
  6. 2006, Columbo, R.M. and Garavello, M., "A well-posed Riemann problem for the p-system at a junction," Networks and Heterogeneous Media, Vol.1, pp.495-511 https://doi.org/10.3934/nhm.2006.1.495
  7. 2004, Zhao, M. et aI., "Godunov-Type Solutions for Water Hammer Flows," J Hydraulic Engineering, Vol.130, pp.341-348 https://doi.org/10.1061/(ASCE)0733-9429(2004)130:4(341)
  8. 2001, Bassett, M.D. et aI., "Calculation of steady flow pressure loss coefficients for pipe junctions," J. Mechanical Engineering Science, Vol.215, pp.861-881 https://doi.org/10.1177/095440620121500801
  9. 2005, Oka, K. and Ito, H., "Energy Losses at Tees With Large Area Ratios," J Fluid Engineering, Vol.127, pp.110-116 https://doi.org/10.1115/1.1852475
  10. 2003, Kim, S.S. et ai., "Cures for the shock instability: Development of a shock-stable Roe scheme," J. Computational Physics, Vol.185, pp.342-374 https://doi.org/10.1016/S0021-9991(02)00037-2
  11. 1990, Hirsch, C., Numerical computation of internal and external flows: Computational Methods for Inviscid and Viscous Flows, Vol.2, Wiley, New York