• Journal of the Korea Society for Simulation
• /
• v.8 no.2
• /
• pp.45-56
• /
• 1999

It is necessary that we should control the traffic to not only efficiently use the rich bandwidth of ATM network but also satisfy the users various requirements for service quality. However, it is very difficult to decide which control mechanism would be applied in real network because there are various types of ATM traffic and traffic control mechanisms. In this paper, a smart simulator is developed ot analyze the performance of a UPC(Usage Parameter Control) mechanism which is a typical traffic control mechanism. The simulator consists of a user interface that supports a menu-driven input form and a simulation program that is executed with the users input parameters. Especially, the simulator establishes more powerful and flexible simulation environment since it supports a more complex simulation applying various source traffic to several different UPC mechanisms at the same time and allows an arbitrary user-defined traffic in addition to some well-known traffic.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.85-92
• /
• 1997

An axial flow fan design system has been made by integrating the self-developed programs and I-DEAS. By using the system, an axial flow fan was designed, manufactured and verified through the wind tunnel experiments in coorperation with a refrigerator appliance division. It has been shown that the optimal design without the ambiguity of the design parameters can be possible by the three-dimensional flow simulations using a self-developed CID code, FANS-3D. (Flow Analysis code using Navier Stokes aguations in Three-Dimensional curvilinear coordinates). By virtue of the fluency of the data flow, an optimally designed fan which satisfies design conditions can be selected in a short time and less cost. The manufacturing processes of a Mock-up and an injection molding die have been automated through the self-made interface programs which connnect from the start to the end. It has been shown that the newly developed fan by this system has a superior performance characteristics to an existing fan.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.4
• /
• pp.11-20
• /
• 2003

This study aims to develop the program for active solar heating system design & analysis. The program, named ASOLis, is consisted of three user's interface like as system input/output, library, and utilities and used TRNSYS as a calculation engine for the system analysis. ASOLis simplifies user's input data through the database and can design 37 different types of solar systems. Solar system is configurated by two separated parts "solar thermal collecting part" and "load supplying part". Due to the user-friendly layout, all design parameters can be changed quickly and easily for the influence on system efficiency. For the reliability, ASOLis compared with experimental result. As a result, ASOLis is expected to be used as a vital tool for the design and analysis of active solar heating system.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.64-69
• /
• 2008

In this study the thermal performance and economic analysis program of solar heating system for district heating was developed. This program, named SOLAN-DHS and based on TRNSYS, consisted of four modules like as user's interface for system input/output, library, and utilities and a calculating engine. SOLAN-DHS simplifies user's input data through the database of most system engineering data including weather data of 17 areas in Korea. Five different types of solar systems which can be applicable to district heating system were presented in this program. Due to the user-friendly layout, all design parameters can be changed quickly and easily for the influence on system efficiency. The reliability of SOLAN-DHS was finally verified by the experiments.

• Journal of Magnetics
• /
• v.6 no.4
• /
• pp.126-128
• /
• 2001

The effect of rapid thermal anneal (RTA) has been investigated on the properties of an FeMn exchange-biased magnetic tunnel junction (MTJ) using magnetoresistance and I-V measurements and transmission electron microscopy (TEM). The tunneling magnetoresistance (TMR) in an as-grown MTJ is found to be ∼27%, while the TMR in MTJs annealed by RTA increases with annealing temperature up to 300$\^{C}$, reaching ∼46%. A TEM image reveals a structural change in the interface of A1$_2$O$_3$layer for the MTJ annealed by RTA at 300$\^{C}$. The oxide barrier parameters are found to vary abruptly with annealing time within a few ten seconds. Our results demonstrate that the present RTA enhances the magnetoresistive properties of MTJs.

• Transactions of Materials Processing
• /
• v.9 no.2
• /
• pp.112-119
• /
• 2000

The roll Pass design is one of the most important processes to design the whole equipment of the rods and bars rolling system. In this study, the roll pass design program named TollRo(Rolling Factory Organizer) was developed. conventional methods to design roll pass were analyzed and a new algorithm to design the dimension of the intermediate groove was introduced. Object oriented programming technology was implemented in this design program. It comprises GUI(Graphic User Interface), function of automatic pass design, function of modifying pass schedule and database of material properties. The developed program can be used to design roll pass with consistency for the rods and bars rolling system. The man-hours for the whole design can be drastically reduced. The design parameters of rolling system can be extracted quickly by this program.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.6
• /
• pp.365-373
• /
• 1997

316L and 420 Stainless steels were deposited onto AZ9ID commercial magnesium alloy by plasma spray process with various gas flow rate of, TEX>$H_2$ secondary gas. And hardness as well as were track volume, coefficient of friction also had been measured. wear and hardness were measured by using reciprocal configuration tribometer and microghardness tester, respectively. Also, the microstructure of the coatings surface the cross sectional area of coating surface and cross sectional area of coaing/Substrate interface had been analyzed with Scanning Electron Microscope(SEM) and Optical microscope(OM). Finally, optimal process parameters for the improvement of coating efficiency such as mechanical property and wear behavior were examined.

• IE interfaces
• /
• v.8 no.1
• /
• pp.15-21
• /
• 1995

Since anthropometric data are essential to the design of industrial products, the national anthropometric survey was performed three times in Korea. An Anthropometric Data Manager system (ADaM) was implemented based on the 1992 national anthropometric survey to promote the utilization of the data. The system provides graphic user interface to facilitate usability. Anthropometric information can be obtained in various ways by the following statistical analyses; multivariate features analysis, correlation analysis, and regression. In addition, recommendations for design parameters of industrial products were provided in this system.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.558-560
• /
• 1998

The operation of robot manipulators has a restriction that the operator must reside at the factory, where the manipulator is used. To overcome this restriction, we propose a remote control system using the internet, the system which runs on the Window 95 environment is composed of the remote client which transfers commands to the server which control and manage the manipulator in the factory. In the control of Hong-ik Direct Drive Arm, it is necessary to consider the complex nonlinear parameters causing the mutual interaction between joints, so we use two TMS320C31 DSP chips in the controller for the real time dynamic control algorithms. For the test of system integrity and the verification of the mathematical modeling, we apply CTM, PD and VSS control algorithms and the simulation results are satisfactory.

• Coupled systems mechanics
• /
• v.1 no.1
• /
• pp.19-37
• /
• 2012

In this work, the iterative coupling of finite element and boundary element methods for the investigation of coupled fluid-fluid, solid-solid and fluid-solid wave propagation models is reviewed. In order to perform the coupling of the two numerical methods, a successive renewal of the variables on the common interface between the two sub-domains is performed through an iterative procedure until convergence is achieved. In the case of local nonlinearities within the finite element sub-domain, it is straightforward to perform the iterative coupling together with the iterations needed to solve the nonlinear system. In particular, a more efficient and stable performance of the coupling procedure is achieved by a special formulation that allows to use different time steps in each sub-domain. Optimized relaxation parameters are also considered in the analyses, in order to speed up and/or to ensure the convergence of the iterative process.