• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.15-21
• /
• 2002

Because of the environmental problem during the pile driving, the use of low noise-vibration auger-drilled pilling is increasing to solve noise and vibration problem in pilling. In Korea, SIP (Soil-Cement Injected Precast Pile) method is mainly used as auger-drilled pilling. But, a proper bearing capacity evaluation formula has not been suggested, yet. To improve and supplement this situation, direct shear tests between SIP pile skin interface and soil were executed under various conditions. Through the analysis of test results, skin resistance characteristics of SIP were investigated thoroughly. Also, the maximum unit skin resistance capacity evaluation formulae on SM, SC soil was suggested.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.1
• /
• pp.59-66
• /
• 2003

The environmental problem due to the pile driving, the use of low noise-vibration auger-drilled pilling is increasing to solve noise and vibration problem in pilling. Therefore, in Korea, SIP (Soil-Cement Injected Precast Pile) method is mainly used as auger-drilled pilling. However, a proper bearing capacity evaluation formula has not been suggested, yet. In order to improve and supplement this situation, direct shear tests between SIP pile skin interface and soil were executed under various conditions. Through the analysis of test results, skin resistance characteristics of SIP were investigated thoroughly. Also, the nonlinear unit skin resistance capacity model and relative parameters evaluation formula with SM, SC soil were suggested.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.153-160
• /
• 2003

While the interests on the environmental problem during the construction are increasing, the use of low noise-vibration auger-drilled pilling is increasing to solve noise and vibration problem in pilling. Therefore, in Korea, SIP(Soil-Cement Injected Precast Pile) method is mainly used as auger-drilled pilling. However, there is no proper design criteria compatible with the ground condition of Korea, so which is most wanted. To improve and supplement this situation, direct shear tests between SIP pile skin interface and soil were executed on various conditions. Through the analysis of test results, skin resistance characteristics of SIP were investigated thoroughly. Also, the nonlinear unit skin resistance capacity model with SM, SC soil were suggested.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.247-254
• /
• 2003

While the interests in the environmental problem during the construction are increasing, the use of low noise-vibration auger-drilled pilling is increasing to solve noise and vibration problem in pilling. Therefore, in Korea, SIP (Soil-Cement Injected Precast Pile) method is mainly used as auger-drilled pilling. However, there is no proper design criteria compatible with the ground condition of Korea, so which is most wanted. To improve and supplement this situation, direct shear tests for the friction between SIP pile skin interface and soil were executed on various conditions. Through the analysis of test results, skin friction characteristics of SIP were investigated thoroughly Also, hyperbolic model parameter fomulas which describe the friction behavior and the new non-linear unit skin friction capacity model with SM, SC soil were suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2321-2328
• /
• 2006

Today, SIP standard (The signalling protocol for the Internet phone service) raises to be the standard technique because the expandability is high and complexity is low. It is widely investigated and actively advocated to use Si81a1 ring protocol for SIP in VoIP service. SIP service can be applied even outside the Internet phone service; instance messaging and various multimedia technology are just an example. This paper proposed an embodiment proxy server for rambling support to use JAIN SIP API. It provides standard interface for testing the Proxy server for SIP and embodiment of user agent that transfer instant massaging and voice communication.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.350-358
• /
• 2005

Recently, VoIP technology is being accepted as are the most promising Internet telephony service, due to the substitution effect of traditional telephony service. Two standards, i.e, . H.323 and SIP. have emerged for signaling and control for Intemet telephony, of which SIP provides far lower complexity and rich extensibility. It is important to secure components of SIP in order to develop various services. Generally, open source codes provide basic functions of SIP as well as complicated structure, but are difficult to extend. In this thesis, we focused on offering interface mechanism between application and SIP User Agent to easily extend for various VoIP services. This thesis describes what function is needed for SIP User Agent, how to define the internal data structure, and how to define the internal processing procedure. The check iist derived through participating the interoperability event for stabilized SIP User Agent is also suggested.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.142-144
• /
• 2002

VoIP(Voice over IP) 시스템을 구현함에 있어서 호설정을 처리하는 여러 프로토콜이 제안되고 있는 가운데 IETF(Internet Engineering Task Force)에서 제안한 SIP(Session Initiation Protocol)는 텍스트 기반의 프로토콜로서 구현과 파싱이 쉬운 등 많은 장점을 가지고 있어 차세대 VoIP의 표준으로 자리잡고 있다. 또한, 뛰어난 확장성을 가지고 있어 다양한 서비스에 적용할 수 있는 호설정 프로토콜이다. 본 논문에서는 SIP를 이용한 VoIP 시스템을 구현함에 있어 주요 구성요소 중 하나인 UA(User Agent)를 2002년 6월에 발표된 새로운 SIP 버전에 맞추어 개발하였다. 본 UA는 플랫폼에 독립적으로 기능을 할 수 있도록 자바(Java)를 사용하여 GUI(Graphical User Interface)환경으로 구현하였다 그리고 RTP(Real-time Transport Protocol) 전송 모듈을 통하여 호설정이 이루어진 후 실제 음성과 화상통신이 이루어지는 부분을 포함하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.178-182
• /
• 2005

The proposed system in this paper is designed to provide users with a means of global location information using Orbcomm satellite communication and X.400 protocol. The system's two-way data transmission capabilities allow users to track mobile or fixed objects anywhere in the world via Internet. This study utilizes the X.400 protocol, and the SIP(Serial Interface Protocol) and self defined control protocol to implement data communication link in this paper. Data processor board connected to SC(Subscriber Communicator) is also designed and implemented to interface with GPS receiver. The experimental results of the proposed global position location system is evaluated through real-time experiments, and we have confirmed it works well according to the protocol designed in this paper.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.292-305
• /
• 2013

EPCglobal has proposed the EPC Sensor Network to efficiently integrate and interoperate the RFID and WSN technologies based on the international standard EPCglobal Network. However, it can not deal with the sensor data without EPS. Also, it does not provide enough management function for the sensor data only. This study proposes USN management system that can deal with these weaknesses of EPC Sensor Network. Not only that, it is suitable for the medical environment properly. In the medical environment, it is important for the medical information to be integrated and interconnected via the standard for medical data. This proposed USN management system is based on SIP-HL 7 and can send RFID and WSN data based on SIP(Session Initiation Protocol). It can be interconnected with the existing hospital information system and exchange the information. Also it can design and materialize SIP Interface based on HL7 that allows the medical information to be exchanged and sent.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.55-60
• /
• 2020

The recent semiconductor packaging technology is evolving into a high-performance system-in-packaging (SIP) structure, and copper-to-copper bonding process becomes an important core technology to realize SIP. Copper-to-copper bonding process faces challenges such as copper oxidation and high temperature and high pressure process conditions. In this study, the bonding interface quality of low-temperature copper-to-copper bonding using a two-step plasma treatment was investigated through quantitative bonding strength measurements. Our two-step plasma treatment formed copper nitride layer on copper surface which enables low-temperature copper bonding. The bonding strength was evaluated by the four-point bending test method and the shear test method, and the average bonding shear strength was 30.40 MPa, showing that the copper-to-copper bonding process using a two-step plasma process had excellent bonding strength.