• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.171-177
• /
• 2007

In this paper, an evaluation method of fracture toughness on interface cracks was investigated in friction welded dissimilar materials with interfacial edge cracks. To establish a reasonable strength evaluation method and fracture criterion, it is necessary to analyze stress intensity factor under the load and residual stress condition on friction welded interface between dissimilar materials. The friction welded specimens with an edged crack were prepared for analysis of stress intensity by using the boundary element method (BEM) and the fracture toughness. A quantitative fracture criterion for friction welded STS 304/SM 45C with interface crack is suggested by using stress intensity factor, F and the results of fracture toughness experiment.

• 항공우주시스템공학회지
• /
• 제6권2호
• /
• pp.1-6
• /
• 2012

On this study, as a Human Factor(HF)'s point of view, typical PVI(Pilot Vehicle Interface) evaluation for small airplane cockpit design, PVI evaluation items and procedures to show compliance to KAS Part 23 "Airworthiness Standards : Normal, Utility, Acrobatic, And Commuter Category Airplanes" are introduced and reviewed. This study is based on the experience of Korean small civil airplane development and certification program.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2277-2286
• /
• 2002

The application of bonded dissimilar materials to industries as automobiles, aircraft, rolling stocks, electronic devices and engineering structures is increasing gradually because these materials, compared to the homogeneous materials, have many advantages for material properties. In spite of such wide applications of bonded dissimilar materials, the evaluation method of quantitative strength considering the stress singularities for its bonded interface has not been established clearly. In this paper, the stress singularity for Bctors and the stress intensity factors were analyzed by boundary element method(BEM) for the scarf joints of Al/Epoxy with and without a crack, respectively. From static fracture experiments of the bonded scarf joints, a fracture criterion and a evaluation method of interface strength in bonded dissimilar materials were proposed and discussed.

• 한국생산제조학회지
• /
• 제4권4호
• /
• pp.50-60
• /
• 1995

Recently advantages joining dissimiliar materials and light weight material techniques have led to increasing use of structural adhesives in the various industries. Stress singulartiy occurs at the interface edges of adhesively bonded dissimilar materials. So it is required to analyze its stress singularity at the interface edges of adhesively bonded joints indissimilar materials. In this paper, the analysis method of stress singularity is studied in detail. Also, effects of the stress singularity at the interface edge of adhesively bonded scarf joints in combinations of dissimilar materials are investigated by using 2-dimensional elastic program of boundary element method. As the results, the strength evaluation method of adhesively bonded dissimilar materials using the stress singularity factor, $\Gamma$,is very useful. The fracture criterion, method of strength evaluation and prediction of fracture strength by the stress singularity factor on the adhesively bonded dissimilar materials are proposed.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.439-445
• /
• 2012

The stress singularity for the excess adhesive on interface of adhesively bonded joint was investigated by using the 2-dimensional elastic boundary element method (BEM). To establish a reasonable strength evaluation method and a fracture criterion for the excess adhesive of interface in adhesively bonded joint, it is necessary to evaluate fracture parameters with various bonding conditions. Under the variations of adhesively bonded thickness (h) and diameter (d) for the excess adhesive, a stress analysis was performed, and from the results, the stress singularity index (${\lambda}$) and the stress singularity factor (${\Gamma}$) were calculated. The variations have a great influences on the stress singularity for the excess adhesive of interface in adhesively bonded joint, and the ${\Gamma}$ is reduced as the "h" and "d" increase.

• 전산구조공학
• /
• 제9권1호
• /
• pp.85-91
• /
• 1996

이 논문에서는 탄성-점탄성 복합재료의 공유면에 존재하는 계면균열에 대한 해석방법을 제시하고 있다. 먼저 탄성-점탄성 대응원리를 이용하여 탄성해석식으로부터 응력확대계수에 대한 식을 유도하였다. 다음으로 시간영역 경계요소법을 이용하여 균열선단에서의 응력을 계산한 다음 응력확대계수의 값을 구하였다. 수치해석의 결과는 본 논문의 정확성과 응용가능성을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.346-351
• /
• 2003

In this paper, an evaluation method of fracture toughness on interface cracks has been investigated under various mixed-mode conditions of the bonded scarf joints. Two types of the bonded scarf joints with an interface crack were prepared to analyze the stress intensity factors using boundary element method(BEM) and to perform the fracture toughness test. From the results of fracture toughness experiments and BEM analysis, an evaluation method of fracture toughness on interface cracks in the bonded components of dissimilar materials has been proposed and discussed.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.110-116
• /
• 2003

In this paper, an evaluation method of fracture toughness on interface cracks has been investigated under various mixed-mode conditions of the bonded scarf joints. Two types of the bonded scarf joints with an interface crack were prepared to analyze the stress intensity factors using boundary element method(BEM) and to perform the fracture toughness test. From the results of fracture toughness experiments and BEM analysis, an evaluation method of fracture toughness on interface cracks in the bonded dissimilar materials has been proposed and discussed.

• 산업경영시스템학회지
• /
• 제32권2호
• /
• pp.140-146
• /
• 2009

Since the computer technology has been drastically developed and broadly employed for the design of human machine system, human system interface was somehow digitalized. Actually the operator's working environment employing the digital devices are not be fully digitalized due to its technical constraints so that it has been changed to the hybrid environment which has a combination of digital and analog elements. The hybrid environments need to study its characteristics and the guidelines for the proper design and evaluation purpose. This paper describes the human factor design elements of the console operated under hybrid environment through studying the characteristics of digital and analog environment based on the related human factor guidelines and literatures. The result of this paper implies the contribution to the evaluation of the generic human working environment which digital and analog elements are jointly used.

• 디자인학연구
• /
• 제12권3호
• /
• pp.105-114
• /
• 1999

최근 전자기술의 발달과 함게 제품들이 인간의 지적 면을 지원하는 스마트한 제품으로 변하면서 OSD는 이런 제품의 입출력을 담당하는 사용자 인터페이스의 중요한 부분으로서 본체의 외형 못지않게 제품개발의 핵심적인 요소가 되고 있다. 특히 영상기기와 정보기기의 경우 그 중요성은 더 커진다. 이런 중요성에도 불구하고 단순히 하드웨어 본체에 탑재하는 부속물로서 취급되어 많은 검증과 평가를 통해 개발되는 하드웨어 본체에 비하여 단순하고 개별적인 사용성평가만을 통해 개발되고 있다. 즉 얼마나 빨리 주어진 그능을 수행하는지 사용하는데 애로는 없는지 등 개별적인 속성에 대한 수행도 위주의 사용성평가에 그치고 있다. 이에 본 연구에서는 수행도 위주의 사용성평가에서 탈피하여 사용자 인터페이스에 대한 주관적 선호도를 바탕으로 사용자의 입장에서 중요한 속성은 무엇이며 또 그러한 속성의 각 수준에 사용자가 부여하는 가치는 어느정도인가를 파악하기 위하여 실제 제품을 사용하는 것과 동일한 환경하에서 사용하게한 후 선호도를 측정하였으며 컨조인트분석에 의하여 각 속성의 중요도 및 각 수준의 만족도를 분석하였다. 리허한 사용성평가 및 분석은 사용자 인터페이스 디자인 프로세스의 최종단계로서 진행되는 것이 아닌 초기단계부터 그 방법과 내용, 또 어떻게 디자인에 피드백할 것인가 등을 계획하여 반복적으로 실시되야 한다.시되야 한다.