• Journal of Hydrogen and New Energy
• /
• v.26 no.2
• /
• pp.120-126
• /
• 2015

Recently, the ever-increasing use of fossil fuels for rapid industrial development and population significantly caused an environment pollution and global warming such as climate change. So research and development of sustainable and eco-friendly energy have been performed. Especially the interest in nuclear fusion fuel was significantly increased from the developed countries. The system of fusion energy production was tritium separation, storage and delivery, and purification. Republic of Korea is in charge of Storage and Delivery System (SDS) in the International Thermonuclear Experimental Reactor (ITER). Welding part of the SDS bottles for storing the tritium is known to be susceptible to hydrogen embrittlement. In this study, conducted a study for the relaxation of the stability and hydrogen embrittlement of the weld area. The hydrogen heat treatment was processed through the Pressure-Composition-Temperature (PCT) device according to the time variation. Also mechanical properties such as impact test and hardness test according to using the alkaline cleaning liquid for hydrogen embrittlement relief and the fracture was observed by scanning electron microscopy (SEM) after the mechanical properties evaluation.

• Convergence Security Journal
• /
• v.16 no.5
• /
• pp.87-93
• /
• 2016

An Interest and development of an automation of the manufactory technology has been attempted actively in domestic and outside country. In particular, small and medium-sized manufactory are striving for the improvement of productivity through the automation of the plant. And manufactories to comply with the German's Industry 4.0 standard has attempted worldwide recently. But, This is not performed because a substantial investment-cost and development-cost and high efforts. Therefore, we attempted to design and mockup the SEB to enhance the productivity of the factory automation system. SEB, in conjunction with RFID and WiFi networks, expanding the communication range than the automation system of the existing plant, the transfer speed was also improved rapidly. And to be able to solve the existing factory automation system of vulnerability security of the problem, it can be solved by adding a section for user authentication.

• Carbon letters
• /
• v.16 no.3
• /
• pp.147-170
• /
• 2015

In recent decades, there has been an increasing interest in the use of carbon fiber reinforced plastic (CFRP) in aerospace, renewable energy and other industries, due to its low weight and relatively good mechanical properties compared with traditional metals. However, due to the high cost of petroleum-based precursors and their associated processing costs, CF remains a specialty product and as such has been limited to use in high-end aerospace, sporting goods, automotive, and specialist industrial applications. The high cost of CF is a problem in various applications and the use of CFRP has been impeded by the high cost of CF in various applications. This paper presents an overview of research related to the fabrication of low cost CF using polyethylene (PE) control technology, and identifies areas requiring additional research and development. It critically reviews the results of cross-linked PE control technology studies, and the development of promising control technologies, including acid, peroxide, radiation and silane cross-linking methods.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.181-187
• /
• 2018

This study was to develop and apply the avatar art activity as a career search program to find out the possibility of oneself based on self-understanding and to find out the value of work. Furthermore, this study has suggested the effect obtained by appreciating their own business card and images in the use of color code media. Art program has been conducted for five sessions in 'past tense' 'present tense' and 'future tense' on first graders in Middle School. As a result education effect obtained from the art program for career exploration in manufacturing Avatar is as follows. First, there was an effect as to how students ended up knowing their inner strength through mind-map realizing their characteristics and personal interest. Secondly, Avatar was manufactured by enhancing an understanding about them through self-exploration. Third, students appreciated their 'business card' and 'video clip' by using color code media building self-leading attitude in realizing career design.

• Journal of Forest and Environmental Science
• /
• v.19 no.1
• /
• pp.48-68
• /
• 2003

There have been some problems of high labor. low productivity in the existing systems of bonsai cultivation. This study was conducted to cultivate a large quantity of hig-quality bonsai through the development of bottom irrigation system and management method. Bonsai placed on the FRP bed were grown very well by bottom irrigation system compared with direct watering and sprinkler system. It was concluded that bottom irrigation system was possible to reduce considerable manual labor and produce mass production of high-quality bonsai within shorter periods. This research was finally found that the growth was significantly better and earlier production was certain in the vinyl house, had another advantage which could cultivate less cold-resistant species and therefore broadened a range of species selection for market supply. Cultivation techniques by the use of vinyl house and bottom irrigation system developed was quite effective for early production of bonsai as well as for high productive and value added. This project developed a new practical techniques and systems which can make mass and early production of bonsai with high quality through input of less labor. Interest in bonsai is now expanding in landscape horticulture and other fields concerned, and bonsai export of our country is also increasing. Results from this research will make a great contribution to enhancing of bonsai cultivator's competitive position in world markets and to improving of their annual income.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2008

In the first part of the paper, Computational Fluid Dynamics analysis of the combusting flow within a high-swirl lean premixed gas turbine combustor and over the $1^{st}$ row nozzle guide vanes is presented. In this analysis, the focus of the investigation is the fluid dynamics at the combustor/turbine interface and its impact on the turbine. The predictions show the existence of a highly-rotating vortex core in the combustor, which is in strong interaction with the turbine nozzle guide vanes. This has been observed to be in agreement with the temperature indicated by thermal paint observations. The results suggest that swirling flow vortex core transition phenomena play a very important role in gas turbine combustors with modern lean-premixed dry low emissions technology. As the predictability of vortex core transition phenomena has not yet been investigated sufficiently, a fundamental validation study has been initiated, with the aim of validating the predictive capability of currently-available modelling procedures for turbulent swirling flows near the sub/supercritical vortex core transition. In the second part of the paper, results are presented which analyse such transitional turbulent swirling flows in two different laboratory water test rigs. It has been observed that turbulent swirling flows of interest are dominated by low-frequency transient motion of coherent structures, which cannot be adequately simulated within the framework of steady-state RANS turbulence modelling approaches. It has been found that useful results can be obtained only by modelling strategies which resolve the three-dimensional, transient motion of coherent structures, and do not assume a scalar turbulent viscosity at all scales. These models include RSM based URANS procedures as well as LES and DES approaches.

• Culinary science and hospitality research
• /
• v.19 no.4
• /
• pp.77-93
• /
• 2013

This study examines the university students majoring in culinary arts to survey the recognition levels of culinary arts education for the purpose of searching for a development plan for culinary education. A survey was conducted to 407 students in a cooking and food service program. To achieve the purpose of this study, SPSS 17.0, a statistics program, was used for a descriptive analysis, a frequency analysis, and a factor analysis. In this study, we have developed a device to measure educational service quality which can be applied to the place of higher education, and factors that determine educational service quality are dragged through this device. In addition, this research identifies which statistically significant factors play a part in overall satisfaction and interprets 26 quality attributes using importance-satisfaction transformed index. The interest and necessity of culinary arts education was very high while the performance degree was considered insufficient. In conclusion, if chances are given to display achievement of desire self-directly through increasing practical training, development and application of various programs, operation of open practice classes and curriculum organization reflecting social changes in the education courses, the culinary arts education will be considered to be more vitalized.

• The Korean Journal of Emergency Medical Services
• /
• v.6 no.1
• /
• pp.27-37
• /
• 2002

The health and medical service attracts more public attention as the economy of Korea is rapidly growing up and the standard of living is elevated. Especially, the interest and demand on the prehospital emergency medical service that consists of the important part of primary medical service that is directly related to the life of patients are gradually increased. However, as compared with other advanced countries such as America in this area, Korea actually fell behind in the utilization of IT (Information Technology) to maximize the efficiency of emergency service system as well as has a problem in the general service system. This study suggested the necessity to introduce EMD (Emergency Medical Dispatch) system that takes a great role as the core part in the prehospital emergency medical service that is not systemized in Korea yet. In addition, this study proposed the implementation model of EMD ASP system using ASP (Application Service Provider) in EMD system to flexibly deal with the change of IT and efficient implementation and integration of information system as well as to significantly reduce cost through wire/wireless high speed Internet network that is politically promoted in Korea on the basis of EMD. The system analysis and design was executed by HIPO (Hierarchy Plus Input Process Output) analysis that was the conceptual design technology for EMD information system modeling based on ASP and DFD (Data Flow Diagram). This study proposed DB table configuration and data schema to implement the application of web browser interface in EMD system through ERD(ER-Diagram) of EMD ASP system. Finally, this study described how to implement and utilize EMD information system. This study aims to facilitate the qualitative development of emergency medical service in the future as suggesting the concrete models for the implementation of high value-added prehospital emergency medical information system as applying ASP concept to EMD system of prehospital emergency medical service area.

• Journal of Family Resource Management and Policy Review
• /
• v.9 no.1
• /
• pp.59-73
• /
• 2005

The purpose of this study was to understand which factors affect on the leisure constraint and leisure attitude of workers, to observe how the factors of leisure constraints affect on the leisure attitude. The subjects of this study were 267 urban workers who are older than 20 years old and resident in Seoul. The periods of this study was from November 15 to December 5. The modified versions of leisure constraint scale and leisure attitude scale were utilized for this study. The results of this study are as follows : First, as a result to compare the average of leisure constraint factors, intrapersonal constraint, which are individual mental status as interest, self-consciousness, uneasiness et at., was founded generally less than interpersonal constraints as personal relationship for leisure activity, or structural constraints as financial, time, information et at., Secondly, it was found that interpersonal constraint was statistically different in age, and that structural constraint was statistically different in sex, education, health status, marital status, income, and career. Thirdly, there were statistically different in cognitive leisure attitude, feeling leisure attitude, and behavioral leisure attitude according to the average monthly income and career. But, it was found that marital status and the five-day workweek system were not statistically different in 3 leisure attitude factors. Finally, 3 leisure constraint factors(intrapersonal, interpersonal, structural) had statistically significant effect on cognitive leisure attitude. Also, intrapersonal leisure constraint and interpersonal leisure constraint had statistically significant effect on feeling leisure attitude and behavioral leisure attitude

• The Mathematical Education
• /
• v.56 no.1
• /
• pp.41-62
• /
• 2017

The purpose of this study is to propose the possibility of integrating creativity and character education and its need in mathematics education by developing and validating a testing tool assessing students' perceptions of mathematical creativity and character. For this purpose, we developed sixty questions in total to extract factors of mathematical creativity and character based on a literature review. Then, questionnaire data were collected for 1258 middle school students. After the collected data were randomly divided into two (n1=615, n2=643), the first group of data was used for exploratory factor analysis and the second one was employed for confirmatory factor analysis. As a result, 45 problems showing nine factors were extracted. The cognitive components of creativity includes divergent thinking, convergent thinking, imagination/visualization, and reasoning, whereas its affective components are interest, motivation, and openness. The character components contain participation, communication, responsibility, and promise. In addition, it is concluded that the developed testing tool, in which character in the model of this study impacts creativity meaningfully, has a measurement consistency which is not affected by gender and grade differences. These results have implications for a guide to curriculum development promoting creativity and character at school by showing objective and practical foundations of helping how to integrate creativity and character education.