• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.47-58
• /
• 2007

교량의 건설과 유지 비용을 줄이고 내진에도 강한 일체식 교대 교량은 전세계 뿐만아니라 우리나라에서도 그 사용량이 증가하고 있다. 하지만 일체식 교대와 뒷채움 지반의 상호작용인 토압거동에 대한 연구는 미진한 상태이다. 따라서 본 연구에서는 PSC빔 거더를 이용한 90m 3경간 연속교 형식인 일체식 교대교량을 국내 처음으로 시험시공하여 공용중에 있는 교량에 대하여 계절적인 온도변화에 따라 발생하는 교대배면 토압을 장기계측하였다. 그 결과에 의하면, 일체식 교대높이(H)에 대한 최대 평균 신장량의 비는 0.0024으로 여름철에, 그리고 일체식 교대높이에 대한 최대 평균 수축량의 비는 0.0011으로 겨울철에 발생하였다. 실측한 최대 수동토압계수과 주동토압계수의 크기는 각각 4.8과 0.7이었고, 그 위치와 형상은 교대저면으로부터 0.82H에서 작용하는 제형의 분포를 보였다. 마지막으로 본 교대의 수동과 주동 토압분포의 작도법을 제안하였다.

• Nuclear Engineering and Technology
• /
• 제38권4호
• /
• pp.343-352
• /
• 2006

Convenient analytical tools for evaluation of the aperiodic and the fluctuating instabilities of the passive residual heat removal system (PRHRS) of an integral reactor are developed and results are discussed from the viewpoint of the system design. First, a static model for the aperiodic instability using the system hydraulic loss relation and the downcomer feedwater heating equations is developed. The calculated hydraulic relation between the pressure drop and the feedwater flow rate shows that several static states can exist with various numbers of water-mode feedwater module pipes. It is shown that the most probable state can exist by basic physical reasoning, that there is no flow rate through the steam-mode feedwater module pipes. Second, a dynamic model for the fluctuating instability due to steam generation retardation in the steam generator and the dynamic interaction of two compressible volumes, that is, the steam volume of the main steam pipe lines and the gas volume of the compensating tank is formulated and the D-decomposition method is applied after linearization of the governing equations. The results show that the PRHRS becomes stabilized with a smaller volume compensating tank, a larger volume steam space and higher hydraulic resistance of the path $a_{ct}$. Increasing the operating steam pressure has a stabilizing effect. The analytical model and the results obtained from this study will be utilized for PRHRS performance improvement.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.98-111
• /
• 1995

High temperature low cycle fatigue shows that cycle-dependent crack growth owing to cyclic plastic deformation occurred simultaneosly with time-dependent crack growth owing to intergranular deformation. Consequently, to estimate crack growth rate uniquely, many to investigators have proposed various kinds of parameters and theories but these could not produce satisfactory results. Therefore the goal of this study is focused on prediction of crack growth rate using predominant damage rule, linear cumulative damage rule and transitional parameter ${\Delta}J_c/{\Delta}J_f$. On the basis of these sinusoidal loading waveform at 600$^{\circ}C$ and 700$^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.629-632
• /
• 2000

Nonlinear frictions which generate many problems in control system exist in almost all the servor control systems. In this paper, the design procedure which employs $H_\infty$ integral controller including two integrators with performance weight is proposed to improve performance of the control system. Limit cycles are unavoidable by the effect of interaction between two integrators and coulomb friction in these system. The describing function method is used to check the limit cycles and determine the coefficients of performance weights to minimize the effect of the limit cycles.

• Structural Engineering and Mechanics
• /
• 제30권5호
• /
• pp.577-592
• /
• 2008

Laplace-Fourier transform techniques are used to investigate the interaction caused by mechanical, thermal and microstress sources in a generalized thermomicrostretch elastic medium with temperature-dependent mechanical properties. The modulus of elasticity is taken as a linear function of reference temperature. The integral transforms are inverted using a numerical technique to obtain the normal stress, tangential stress, tangential couple stress, microstress and temperature distribution. Effect of temperature dependent modulus of elasticity and thermal relaxation times have been depicted graphically on the resulting quantities. Comparisons are made with the results predicted by the theories of generalized thermoelasticity. Some particular cases are also deduced from the present investigation.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.607-612
• /
• 2007

Relationship between charge transfer mechanism and quantum coherence has been investigated using a realtime quantum dynamics approach. In the on-the-fly filtered propagator functional path integral simulation, by separating paths that belong to different mechanisms and by integrating contributions of correspondingly sorted paths, it was possible to accurately obtain quantitative contribution of different transport mechanisms. For a 5'-GAGGG-3' DNA sequence, we analyze charge transfer processes quantitatively such that the governing mechanism alters from coherent to incoherent charge transfer with respect to the friction strength arising from dissipative environments. Although the short DNA sequence requires substantially strong dissipation for completely incoherent hopping transfer mechanism, even a weak system-environment interaction markedly destroys the coherence within the quantum mechanical system and the charge transfer dynamics becomes incoherent to some degree. Based on the forward-backward path deviation analysis, the coherence variation depending on the environment is investigated numerically.

• Structural Engineering and Mechanics
• /
• 제44권1호
• /
• pp.85-107
• /
• 2012

The building frame and its foundation along with the soil on which it rests, together constitute a complete structural system. In the conventional analysis, a structure is analysed as an independent frame assuming unyielding supports and the interactive response of soil-foundation is disregarded. This kind of analysis does not provide realistic behaviour and sometimes may cause failure of the structure. Also, the conventional analysis considers infill wall as non-structural elements and ignores its interaction with the bounding frame. In fact, the infill wall provides lateral stiffness and thus plays vital role in resisting the seismic forces. Thus, it is essential to consider its effect especially in case of high rise buildings. In the present research work the building frame, infill wall, isolated column footings (open foundation) and soil mass are considered to act as a single integral compatible structural unit to predict the nonlinear interaction behaviour of the composite system under seismic forces. The coupled isoparametric finite-infinite elements have been used for modelling of the interaction system. The material of the frame, infill and column footings has been assumed to follow perfectly linear elastic relationship whereas the well known hyperbolic soil model is used to account for the nonlinearity of the soil mass.

• Bulletin of the Korean Chemical Society
• /
• 제16권9호
• /
• pp.873-885
• /
• 1995

The local structural and thermodynamical properties of blends A-B/H of a diblock copolymer A-B and a homopolymer H are studied using the polymer reference interaction site model (RISM) integral equation theory with the mean-spherical approximation closure. The random phase approximation (RPA)-like static scattering function is derived and the interaction parameter is obtained to investigate the phase transition behaviors in A-B/H blends effectively. The dependences of the microscopic interaction parameter and the macrophase-microphase separation on temperature, molecular weight, block composition and segment size ratio of the diblock copolymer, density, and concentration of the added homopolymer, are investigated numerically within the framework of Gaussian chain statistics. The numerical calculations of site-site interchain pair correlation functions are performed to see the local structures for the model blends. The calculated phase diagrams for A-B/H blends from the polymer RISM theory are compared with results by the RPA model and transmission electron microscopy (TEM). Our extended formal version shows the different feature from RPA in the microscopic phase separation behavior, but shows the consistency with TEM qualitatively. Scaling relationships of scattering peak, interaction parameter, and temperature at the microphase separation are obtained for the molecular weight of diblock copolymer. They are compared with the recent data by small-angle neutron scattering measurements.

• Child Health Nursing Research
• /
• 제9권1호
• /
• pp.74-84
• /
• 2003

This study was designed to investigate effects of maternal education using Brazelton Neonatal Behavioral Assessment Scale(the following will be marked as NBAS) on the mother-infant interaction and infant behavior. The subjects of this study consisted of 48 pairs of normal mother and infant, 24 pairs for intervention group and 24 pairs for control group. The subjects were recruited from two general hospitals, and an OBGY clinic located in J city. The data were collected from July 30, 2001 to October 6, 2001. Prior to investigation and data collection, following operational hypotheses were set up in order to compare the investigative data against these operational hypotheses(H). H1: Intervention group will higher mother-infant interaction score than control group. H2: Intervention group infants will higher overall performance in infant behavior test score than control group infants. The results of this study were summarized as follows: 1. The mother-infant interaction score was 59.79 points in intervention group and 53.91 points in control group. The mother-infant interaction score of intervention group showed significant difference than control group. Therefore, hypothesis 1 was supported. 2. The infant behavior score of intervention group was significantly higher than control group, but partially. Therefore, hypothesis 2 was partially supported. 1) The social interaction(orientation) score was 46.58 points in intervention group and 43.50 points in control group. The orientation score of intervention group showed significant difference than control group. 2) The state regulation score was 26.79 points in intervention group and 25.33 points in control group. The state regulation score of intervention group showed significant difference than control group. In conclusion, present work demonstrated that maternal education using NBAS is an effective intervention method for promotion of mother-infant interaction and of infant behavior development. Author believes that many inexperience young mother may find NBAS-based maternal education beneficial for their nursing babies, therefore NBAS-based intervention is recommended to be adopted routinely as an integral part of neonatal nursing strategies.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.430-437
• /
• 2020

본 연구에서는 다단제어(Cascade Control)를 위한 안티 와인드업(Anti-windup) 기술을 개발하였다. 다단제어는 외란을 보다 효과적으로 제어하기 위해 내부에 되먹임(Feedback) 제어루프를 추가한 제어구조이다. 단일루프제어(Single-loop Control)와는 다르게 두 개의 제어루프로 이루어져 내부의 종속제어루프(Secondary Control)가 외부의 주제어루프(Primary Control)에 영향을 미치는 특징을 가지고 있다. 산업현장에서 다단제어에 적용하는 기존의 안티 와인드업 기술은 주로 주제어기(Primary Controller)와 종속제어기(Secondary Controller)에 각각 로컬 역연산법(Back Calculation)을 적용하는 것이다. 하지만 이 방법은 종속제어기의 제어출력이 포화되었을 때 발생하는 주제어기의 적분누적(Integral-windup) 현상을 효과적으로 제거하지 못한다. 이를 해결하기 위해 기존 로컬 안티 와인드업 기술을 확대 적용한 두 가지의 다단제어용 안티 와인드업 기술을 제안한다. 첫 번째는 다단 조건부 적분법(Cascade Conditional Integration)이고 두 번째는 다단 역연산법(Cascade Back Calculation)으로 단일루프제어에 적용되어 왔던 로컬 조건부 적분법과 역연산법을 다단제어로 확대 적용하여 다단제어 시스템에서 PID제어기의 적분누적 현상을 방지하고자하였다. 개발한 다단 조건부 적분법과 다단 역연산법은 간단하고 직관적이면서도 종속제어기의 제어출력의 포화로 인해 발생한 적분누적현상을 효과적으로 방지할 수 있고 공정이나 제어기 형태에 상관없이 우수한 제어성능을 유지할 수 있었다. 향후 실제 공정 적용을 통해 신뢰성을 확보한다면 산업현장의 다단제어기 성능을 개선하는데 크게 기여를 할 수 있을 것이다.