• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.126-129
• /
• 2006

The marine environment is under considerable threat from intentional or accidental oil spills, ballast water discharged, dredging and infilling for coastal development, and uncontrolled sewage and industrial wastewater discharges. Monitoring spills and illegal oil discharges is an important component in ensuring compliance with marine protection legislation and general protection of the coastal environments. For the monitoring task an image processing system is needed that can efficiently perform the detection and the tracking of oil spills and in this direction a significant amount of research work has taken place mainly with the use of radar (SAR) remote sensing data. In this paper the level set image segmentation technique was tested for the detection of oil spills. Level set allow the evolving curve to change topology (break and merge) and therefore boundaries of particularly intricate shapes can be extracted. Experimental results demonstrated that the level set segmentation can be used for the efficient detection and monitoring of oil spills, since the method coped with abrupt shape’s deformations and splits.

• 한국재료학회지
• /
• 제22권1호
• /
• pp.8-15
• /
• 2012

Silicon-based thin film was prepared at room temperature by an electrochemical deposition method and a feasibility study was conducted for its use as an anode material in a rechargeable lithium battery. The growth of the electrodeposits was mainly concentrated on the surface defects of the Cu substrate while that growth was trivial on the defect-free surface region. Intentional formation of random defects on the substrate by chemical etching led to uniform formation of deposits throughout the surface. The morphology of the electrodeposits reflected first the roughened surface of the substrate, but it became flattened as the deposition time increased, due primarily to the concentration of reduction current on the convex region of the deposits. The electrodeposits proved to be amorphous and to contain chlorine and carbon, together with silicon, indicating that the electrolyte is captured in the deposits during the fabrication process. The silicon in the deposits readily reacted with lithium, but thick deposits resulted in significant reaction overvoltage. The charge efficiency of oxidation (lithiation) to reduction (delithiation) was higher in the relatively thick deposit. This abnormal behavior needs to clarified in view of the thickness dependence of the internal residual stress and the relaxation tendency of the reaction-induced stress due to the porous structure of the deposits and the deposit components other than silicon.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2451-2454
• /
• 2005

In recent years, the importance of the characterization of fall for a fracture prevention system keeps increasing since fracture from a fall can lead to serious health problems. Fall is one of the major sources which increase morbidity in elderly people. In terms of the cost and the influence to the quality of life, the most serious injury with hip fractures is caused by falls. The traditional methods in characterizing fall patterns have been mainly by the epidemiological surveys. With surveys, the exact data of fall patterns can not been acquired. In this paper, we measured and analyzed with the parameters related to fall pattern such as velocities and accelerations during the motion of falls using 3D motion capture program. We acquired the parameters of the fall pattern of intentional and unexpected fall. The result showed that the variation of velocity and acceleration during fall was very important in characterizing fall pattern, which of vital importance for the development of a fracture prevention system and for the safety of the elderly.

• 복식문화연구
• /
• 제10권3호
• /
• pp.270-282
• /
• 2002

This study was established to understand how Arte Povera has affected the contemporary fashion based on the analyses of its characteristics and may provide a prospective view to predict style of future fashions. The results were as follows : 1) “The poverty” shows such characteristics as patch work, intentional mismatch, and tendency to prefer slightly used style. This meaning can be explained as direct expression from a sense of alienation, against to consumer economy, and dual-expression between poverty and wealth. 2) “Anti-formativeness” can be described for misinterpretations of creation, arrangement, and informal silhouette due to distortion of the human body. This expression includes such meanings as against to traditionalism, ignorance of rationality, and disorganization of the concepts between the beauty and the ugly. 3) “Naturalism” indicates as characteristics of use of natural materials and primitive expression. This expression could be generated from adaptation to the nature and desire toward uncivilized society due to skepticism about modern society. 4) “Symbolism” shows such expressions as an isolated feeling from society, and metaphoric sense from specific situations because there are too many applications of imported materials. This tendency can be also explained with the creations of spaces for opened concepts through disorganizations of territory, obscurity, and irregularity.

• 한국군사과학기술학회지
• /
• 제12권2호
• /
• pp.182-190
• /
• 2009

GPS receivers can be disrupted by intentional or unintentional jamming, then it is unable to receive GPS signals and it is impossible to get the correct navigation results. Anti-jamming schemes using array antennas are being studied well due to high performance of those, and the efforts to apply them to GPS receiver are also being done. A GPS receiver structure for a multiple beam-forming scheme among those schemes has been proposed in this paper, and the performance is also compared with that using a general GPS receiver structure. For a general GPS receiver structure, each satellite signal which is formed by a beam-forming scheme is summed to be processed in a part of digital signal processing. For a proposed GPS receiver structure, however, each satellite signal is respectively processed by a designated channel in a part of digital signal processing. Finally, it is confirmed that the proposed GPS receiver structure is superior to a general GPS receiver structure in a point of the carrier to noise power ratio and the navigation accuracy using a software platform.

• 컴퓨터교육학회논문지
• /
• 제7권5호
• /
• pp.57-70
• /
• 2004

본 연구는 선행 연구에서 도출한 CSILE에서의 협력적 지식구축에 영향을 주는 변인들간의 관련성을 규명하기 위한 후속연구이다. CSILE는 학습자들의 지식구축을 지원하는 환경으로 학습공동체의 탐구과정을 지원하기 위해 활용된다. 본 연구는 CSILE 기반의 초등학교 과학과 탐구학습을 대상으로 선행연구를 통해 밝힌 변인, '지식의 이해', '과학적 소양', '학습 의도'간의 관련성을 살폈고, 각각의 변인이 탐구력을 예측할 수 있는지 분석하였다. 실험 결과, 과학과 탐구에 대한 학술적인 의도가 지식의 이해와 과학적 소양과 관련이 있음을 알 수 있었다. 또한, 탐구력을 예측할 수 있는 변인으로서 과학적 소양의 해석력을 검증하고, CSILE 기반의 탐구학습에서 과학적 소양의 증진을 위해 고려해야 할 사항을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.276-276
• /
• 2008

Transparent and conducting indium tin oxide (ITO) and ITO/Nickel/ITO(INI) multilayered films were prepared on glass substrates by a magnetron sputtering without intentional substrate heating. The RF(13.56MHz) and DC power were applied to ITO and Nickel target, respectively. The thickness of ITO, Ni and ITO films were kept constantly at 50, 5 and 45 nm. In order to consider the effect of post deposition vacuum annealing in vacuum on the physical and optoeletrical properties of INI films, optical transmittance, electrical resistivity, crystallinity of the films were analyzed. From the observed result, it may conclude that the optoelectrical properties of the INI films were dependent on the post deposition annealing. For the INI films annealed at $300^{\circ}C$, the films have a polycrystalline structure with (110), (200), (210), (211) and (300). The resistivity of the films were $4.0\times10^{-4}{\Omega}cm$ at room temperature. As the annealing($300^{\circ}C$), resistivity decreased to $2.8\times10^{-4}{\Omega}cm$. And also the optical transmittance decreased from 79 to 70 % at 550nm.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.157-163
• /
• 2016

Clocks for time synchronization using radio signals such as global navigation satellite system (GNSS) may lose reference signals by intentional or unintentional jamming. This is called as holdover. When holdover occurs, a clock goes into free run in which synchronization performance is degraded considerably. In order to maintain the required precise time synchronization during holdover, accurate estimation on main parameters such as frequency offset and frequency drift is needed. It is necessary to implement an optimum filter through various simulation tests by creating clock noise in accordance with given specifications in order to estimate the main parameters accurately. In this paper, a method that creates clock noise in accordance with given specifications is described.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권3호
• /
• pp.147-153
• /
• 2018

Jamming countermeasures are used to decrease or prevent the impact of intentional jamming applied to degrade the quality of information provided by a global navigation satellite system (GNSS) receiver. The maximum performance of jamming countermeasure can be obtained only when a proper technique is applied according to the type of jammer. This paper suggests a jamming identification technique for providing information regarding the type of jamming. The center frequency and bandwidth of jammer signal are inconsistent and may change according to time, and thus a spectral correlation function and wavelet coherence were considered in order to analyze the signal in the time and frequency space. Because the two characteristics derive different analysis results, two different identification techniques were suggested and the performances thereof were analyzed. Numerical results show that the two identification techniques have relative advantages and disadvantages as to time consumed and performance. The suggested methods can sufficiently identify the jammer before the GNSS receiver becomes inoperable because of jamming.

• 대한가정학회지
• /
• 제39권7호
• /
• pp.85-100
• /
• 2001

A Study on the make-up expression and purchasing behavior of make-up cosmetics based on the lifestyle. The intention of this study is to classily the consumer group based on the lifestyle, to research the characteristics and desire of the each group, and to find out the differences of the make-up expression and purchasing behavior of make-up cosmetics among each group. The result of this study are as follow; 1. We have obtained seven factors out of twenty six lifestyle items by using AIO lifestyle measurement. The seven factors are make-up high involvement factor, brand loyal factor, make-up bases factor, economical and natural beauty oriented factor, impulsive consumption oriented factor, stubborn choice factor, sensitive to others view factor 2. We have formed four groups based on the seven factors. The four groups are impulsive consumption type, professional make-up type, intentional make-up type, basic type. 3. It was examined that women want to express smart, ellegant and intelligent images form the make-up 4. According to the examination of the differences of the purchsing behavior, only the purchase motive, information source and cosmetics purchase amount per month was differentiate among the groups.