• 한국전기전자재료학회논문지
• /
• 제24권8호
• /
• pp.647-653
• /
• 2011

In this study, a method to measure the thickness of thin film by EDS (energy dispersive spectroscopy) is suggested. We have developed a model which calculates the thickness of thin film from the characteristic x-ray intensity ratio of the elements in thin film and substrate by considering incident electron beam energy, x-ray generation curve, backscattering and absorption of x-ray, take-off angle of x-ray and tilt angle of the sample. We obtained the relation curve between the film thickness measured experimentally and the x-ray intensity ratio of elements. The film thicknesses calculated from the model agrees quite well with those measured experimentally. Therefore, the thin film thickness can be measured rapidly and accurately by using the model developed in this study and the x-ray intensity ratio obtained in EDS analysis.

• 한국의류학회지
• /
• 제6권1호
• /
• pp.61-66
• /
• 1982

Succeeding to Report 1, to compare folded curtain fabrics with curtain fabrics, the sound pressure level (SPL) of folded curtain fabrics were measured by sound level meter. Transmission coefficient was calculated by the ratio of incidence sound intensity and transmission sound intensity. The relationship between these values and factors (drape coefficient, porosity) relating to the structure of curtain fabrics were investigated experimentally. The following results were obtained: 1. The transmission coefficient by ratio of sound pressure level was lower than that by ratio of sound intensity. 2. In folded curtain fabrics, difference of SPL was smaller and transmission coefficient generally decreased. 3. The relation between the porosity and transmission coefficient of curtain fabrics is given as plus correlation.

• 전자공학회논문지
• /
• 제50권12호
• /
• pp.191-196
• /
• 2013

본 논문에서는 실제 환경에서 인접 배치된 무지향성 스테레오 마이크로폰을 활용하여 녹음받은 스테레오 오디오 신호를 양이간 강도차에 기반하여 원하는 방위각에 존재하는 음원을 추출하는 음원 분리 기법을 제안한다. 먼저, 최소 분산 무손실 응답빔형성기를 활용하여 스테레오 오디오 신호의 양이간 강도차를 극대화하고, 강도차 기반의 음원 분리 기법을 적용한다. 제안된 기법의 성능을 검증하기 위하여 stereo audio source separation evaluation campaign (SASSEC)에서 제공하는 객관적 성능평가 지표인 source-to-distortion ratio (SDR), source-to-interference ratio (SIR), sources-to-artifacts ratio (SAR)을 측정하였다. 측정한 결과, 음원 분리 기법에 빔형성기까지 적용한 결과가 높은 성능을 보인 것으로 평가되었다.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.62-69
• /
• 1986

본 연구에서는 표면균열의 전파거동에 관한 연구의 일환으로 경량화재료 로서 항공기 구조용으로 널리 사용되고 있는 7075-T651 알루미늄합금을 준비하고 제하탄성 compliance법을 이용하여 표면 및 깊이 방향의 균열진전거동의 특성을 밝히고져 한다.

• 오토저널
• /
• 제15권2호
• /
• pp.112-120
• /
• 1993

Variable thickness plates are commonly encountered in the majority of mechanical/structural components of industrial applications. And, as a result of the unsymmetry of the structure or the load and the anisoptropy of the materials, the cracks in engineering structures are generally subjected to combined stresses. In spite of considerable practical interest, however, a few fracture mechanics study on combined mode crack in a variable thickness plate have carried out. In this respect, combined mode 1/3 stress intensity factors $K_{1}$ and $K_{3}$ at the crack tip for a variable thickness plate were obtained by 3-dimensional finite element analysis. Variable thickness plates containing a central slant crack were chosen. the parameters used in this study were dimensionless crack length .lambda. crack slant angle .alpha, thickness ratio .betha. and width ratio .omega. Stress intensity factors were calculated by crack opening displacement(COD) and crack tearing displacement(CTD) method proposed by Ingraffea and Manu. The effect of thickness ratio .betha. on $K_{1}$ is relatively great in comparison to $K_{3}$.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.447-456
• /
• 1997

Stress intensity factor of semi-infinite parallel crack propagation with constant velocity in dissimilar orthotropic strip under out-of-plane clamped desplacement is investigated. Using Fourier integral transforms the boundary value problem is derived by a pair of dual integral equation and finally reduced to a single Wiener-Hopf equation. By applying Wiener-Hopf technique the equation is solved. Applying this result the asymptotic stress fields near the crack tip are determined, from which the stress intensity factor is obtained in closed form. The more the ratio of anisotropy or the ratio of bi-material shear modulus increase in the main material including the crack, the more the stress intensity factor increases. Discontinuity in the stress intensity factor is found as the parallel crack approaches the interface. In special case, the results of isotropic materials agree well with those by the previous researchers.

• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.629-640
• /
• 2019

This paper presents a theoretical and finite element (FE) study on the stress intensity factors of double-edged cracked steel beams strengthened with carbon fiber reinforced polymer (CFRP) plates. By simplifying the tension flange of the steel beam using a steel plate in tension, the solutions obtained for the stress intensity factors of the double-edged cracked steel plate strengthened with CFRP plates were used to evaluate those of the steel beam specimens. The correction factor α₁ was modified based on the transformed section method, and an additional correction factor φ was introduced into the expressions. Three-dimensional FE modeling was conducted to calculate the stress intensity factors. Numerous combinations of the specimen geometry, crack length, CFRP thickness and Young's modulus, adhesive thickness and shear modulus were analyzed. The numerical results were used to investigate the variations in the stress intensity factor and the additional correction factor φ. The proposed expressions are a function of applied stress, crack length, the ratio between the crack length and half the width of the tension flange, the stiffness ratio between the CFRP plate and tension flange, adhesive shear modulus and thickness. Finally, the proposed expressions were verified by comparing the theoretical and numerical results.

• 한국가스학회지
• /
• 제4권1호
• /
• pp.33-39
• /
• 2000

긴 표면균열을 갖는 알루미늄합금(A5083)의 평판을 사용하여, 균열관통후의 응력확대계수를 검토하였다. 짧은 표면균열의 관통후에 제안된 식에 의하여 긴 표면균열 관통시의 평가는 균열종횡비가 적을수록 오차가 크게 되므로, 진전거동을 정확하게 평가하기 위해서는 수정이 필요하였다. 따라서 긴 표면균열 관통시의 종횡비를 고려하여, 응력확대계수의 평가식을 수정함으로써 관통후 고정도의 해석이 가능하였다.

• Journal of Welding and Joining
• /
• 제16권1호
• /
• pp.63-69
• /
• 1998

The stress intensity factor has been calculated theoretically for the cracked plate subjected to remote normal stress and reinforced with a sheet by symmetric seam welding. The singular integral equation was derived based on displacement compatibility condition between the cracked sheet and the reinforcement plate, and solved by means of Erdogran and Gupta's method. The results from the derived equation for stress intensity factor were compared with FEM solutions and seems to be reasonable. The reinforcement effect gets better as welding line is closer to the crack and the stiffness ratio of the cracked plate and the reinforcement sheet becomes larger.

• Journal of Korea Trade
• /
• 제26권4호
• /
• pp.63-82
• /
• 2022

Purpose - Drawing on relational institutional theory, we explored how demographic similarity between board members of a firm and newly emerged political elites led to firms' increased financial resource acquisition such as leverage ratio and decreased export intensity amidst the Asian financial crisis. We also studied how a firm's leverage ratio and export intensity can further affect firm profitability and financial credit rating. Design/methodology - We revisited and explored a unique, unprecedented crisis that affected most Korean firms: the Asian financial crisis that coincided with a governmental shift from a conservative to a liberal party. We collected demographic information from 432 listed Korean firms' board members and 43 political elites of the Blue House from 1998-2000 to create a demographic similarity measurement. We collected firms' financial information, built panel data, and used ordinary least squares regression to test our theory. Findings - Our results showed that demographic similarity between a firm's directors and newly emerged politicians had a positive association with a firm's leverage ratio but a negative association with a firm's export intensity. A firm's leverage ratio had a negative relationship with firm performance measured by firm profitability and financial credit rating. A firm's export intensity showed a positive effect on firm performance. Originality/value - We highlighted that during an economic crisis that coincided with a governmental shift and change of leading political actors, firms exerted efforts to survey the environment and build new external stakeholder relationships to cope with the changing landscape. We proposed that in an emerging market like Korea where low levels of trust and favoritism are prevalent across society, one of the relational institutional strategies that firms can employ is the selection of directors with similar demographic characteristics to political elites based on factors including birthplace and school affiliations. We examined the efforts of firms to build political networks with newly empowered political elites during a financial crisis, and the consequences of establishing such networks. We highlighted that during a financial crisis, the demographic similarity between a firm's board members and newly emerged politicians can provide firms with access to financial resources but can also result in poor management and reduced effort to enhance its international competitiveness.