• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.93-102
• /
• 2014

In the flood plain, river facilities such as sports facilities and ecological park are builded up since the late 2000s. The recent increase of rainfall intensity and flood frequency results in the immersions of parks and river facilities located in the flood plain. Therefore it is necessary to perform the numerical analysis for the extreme rain storm in the flood plain. In this study, to analyze the hydraulic impact by lowering and rising of the water level at flood plain, Both the FaSTMECH, which is a quasi-unsteady flow analysis model to be used for simulating the wet and dry, and the Nays2D, which is unsteady flow analysis model, are used in this study. Also, the flow velocity distribution and the inundation are compared over a period of the typhoon. As a result, the flow velocity distribution at flood plain showed very low values compared to the flow rate in the main channel. This means that the problem of sedimentation is more important than that of erosion in the flood plain.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.997-1005
• /
• 2014

This study evaluated hydrological drought the using the annual minimum flow and the annual maximum deficit method and proposed the new concept of water deficit-duration-frequency curves similar to rainfall intensity-duration-frequency curves. The analysis results of the annual minimum flow, the return periods of hydrological drought in the most duration of 1989 and 1996yr were the longest. The analysis results of the annual maximum deficit, the return periods of 60-days and 90-day deficit which are relatively short duration were the longest in 1995yr, about 35-year, Hydrological drought lasted longer was in 1995, the return period was about 20-year. Though duration as well as magnitude is a key variable in drought analysis, it was found that the method using the annual minimum flow duration not distinguish duration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2013

The interference among the rain radars and interference in the adjacent wireless station due to the spurious signals from the rain radar were analyzed in this paper. The rain radar measures the rain intensity using S-band signal. The measured data are utilized in forecasting the rainfall. The interference among the rain radars or in the adjacent wireless stations may be caused by the operation with low elevation angle and the high output power. Based on the propagation analysis of S band signal and the deduced interference protection ratio of rain radar, the interference due to the rain radar are analyzed. Also, the radiation spectrum characteristics of a rain radar are deduced from the caused interference effects by the spurious signals of the rain radar. To minimize the interference effects for adjacent wireless stations, it is required to get the rejection characteristics of spurious signals above 105 dB. In viewpoints of interference for rain radars, it is necessary to operate the rain radar with a different PRF and operation time opposite to adjacent rain radars.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.334-334
• /
• 2022

Improvement of old-fashioned rain gauge systems for automatic, timely, continuous, and accurate precipitation observation is highly essential for weather/climate prediction and natural hazards early warning, since the occurrence frequency and intensity of heavy and extreme precipitation events (especially floods) are recently getting more increase and severe worldwide due to climate change. Although rain gauge accuracy of 0.1 mm is recommended by the World Meteorological Organization (WMO), the traditional rain gauges in both weighting and tipping bucket types are often unable to meet that demand due to several existing technical limitations together with higher production and maintenance costs. Therefore, we aim to introduce a newly developed and cost-effective hybrid rain gauge system at 0.1 mm accuracy that combines advantages of weighting and tipping bucket types for continuous, automatic, and accurate precipitation observation, where the errors from long-term load cells and external environmental sources (e.g., winds) can be removed via an automatic drainage system and artificial intelligence-based data quality control procedure. Our rain gauge system consists of an instrument unit for measuring precipitation, a communication unit for transmitting and receiving measured precipitation signals, and a database unit for storing, processing, and analyzing precipitation data. This newly developed rain gauge was designed according to the weather instrument criteria, where precipitation amounts filled into the tipping bucket are measured considering the receiver's diameter, the maximum measurement of precipitation, drainage time, and the conductivity marking. Moreover, it is also designed to transmit the measured precipitation data stored in the PCB through RS232, RS485, and TCP/IP, together with connecting to the data logger to enable data collection and analysis based on user needs. Preliminary results from a comparison with an existing 1.0-mm tipping bucket rain gauge indicated that our developed rain gauge has an excellent performance in continuous precipitation observation with higher measurement accuracy, more correct precipitation days observed (120 days), and a lower error of roughly 27 mm occurred during the measurement period.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.168-168
• /
• 2022

According to the 5th Climate Change Report, global average temperature in 2081~2100 will increase 1.8℃ based on RCP 4.5 and 3.7℃ based on RCP 8.5 from the current climate value (IPCC Working Group I AR5). As temperature is expected to increase due to global warming and the intensity and frequency of rainfall are expected to increase, damage to crops is expected, and countermeasures must be taken. This study intends to evaluate rice growth in terms of nitrogen utilization efficiency according to future climate change conditions. In this experiment, Oryza sativa cv. Shindongjin were planted at the SPAR facility of the NICS in Wanju-gun, Jeollabuk-do on June 10, and were planted and grown according to the standard cultivation method. Cultivation conditions are high temperature, high CO₂ (current temperature+4.7℃·CO₂ 800ppm), high temperature (current temperature+4.7℃·CO₂ 400ppm), current climate (current tempreture·CO₂ 400 ppm). Nitrogen was varied as 0, 9, 18 kg/10a. The N content and C/N ratio of all rice leaves, stems, and seeds increased at high temperature, and the N content and C/N ratio decreased under high temperature and high CO₂ conditions com pared to high temperature. Compared to the current climate, NUE increases by about 8% under high temperature and high CO₂ conditions and by about 2% under high temperature conditions. This seems to be because the increase in temperature and CO₂ induced the increase in biomass. ANUE related to yield decreased by about 70% compared to the current climate under high temperature conditions, and decreased by about 45% at high temperature and high CO₂, showing a tendency to decrease compared to high temperature. This appears to be due to reduced fertility and poor ripening due to high temperature stress. However, as the nitrogen increased, the number of ears and the number of grains increased, slightly offsetting the production reduction factor.

• KCID journal
• /
• v.14 no.1
• /
• pp.57-66
• /
• 2007

Temporal changes in total nitrogen (T-N) and phosphorus (T-P) concentrations in paddy floodwater in response to fertilization under rain-shielding pot and small-scaled field conditions were investigated. On the basis of the changing patterns, suggestions for the use of fertilization factors, such as days after fertilization, in developing models for the estimation of T-N and T-P loads from paddy fields were made. Total N concentration was susceptible to fertilization, showing a peak concentration right after fertilization followed by a decreasing pattern with the elapse of days after fertilization. The decreasing pattern of T-N concentration followed the first- order kinetics, indicating that the models are likely to be an exponential equation using days after fertilization as an independent variable. Comparison between the pot and field experiments conducted with soils different in soil fertility revealed that indigenous soil N concentration significantly affected T-N concentration, and this suggests that soil N status can be used as the second variable for the models. Meanwhile, temporal changes in T-P concentration did not respond to P fertilization as sensitively as T-N. In combination with other published results, our study suggests that rainfall intensity and other factors associated with farming activities that are likely to cause disturbance of soil particles containing P may be used as possible variables for the models.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.91-94
• /
• 2007

본 연구는 소유역의 강수계측망별 빈도해석에 의한 확률강우량 예측으로 최적 설계홍수량을 추적하고자 한다 빈도해석은 대전유역내 지방기상청의 낮은 계측망 멸도와 13개 소구역으로 분할된 지자체의 높은 계측망 멸도에서 측정된 강우량 자료를 대상으로 하였다 해석에는 낮은 밀도의 한 지점에서 $1969{\sim}2005$년까지 36년간 자료와 높은 밀도의 13 개 지점에서 $2002{\sim}2006$년까지 6년간 자료를 연초과치 계열로 확장하여 각각 2개군으로 구성하였다 강우자료 분석결과 낮은 밀도의 지속기간 1시간에서 79.1mm, 장시간에서 327.0mm, 높은 밀도의 지속기간 1시간에서 85.0mm, 24시간에서 245.0mm로 나타났다. 본 연구에서는 Gumbel 분포와 2변수 Gamma 분포 및 일반극치분포, $2{\cdot}3$ 변수 대수정규분포, 2변수 Weibull 분포에 ${\chi}^2$검정, K-S 검정으로 적합도를 검정하여 Gumbel 분포가 가장 적합한 것으로 나타났다 유도된 강우강도-지속기간-재현기간 관계식은 소유역내 확률강우강도 예측과 설계홍수량 산정에 유용하게 사용될 수 있을 것이다.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.461-469
• /
• 2004

This research is to determine the stormwater effects on sewer concentrations by measuring and comparing the flow and pollutant concentrations during dry and rainy periods in the existing BOX type combined sewer pipes. The monitoring was carried out in two sites, which are the Daesachen outfall having PE separation wall in BOX type combined sewer pipes and the Yongunchen outfall not having seperatioin wall. The average flow-weighted BOD concentraion in Yongunchen outfall is 2-fold lower than in Daesachen outfall because of the dilution effect from ravine water. However, the pollutant mass loading is 16 fold higher in Yongunchen outfall than in Daesachen outfall because of more flows. According to the research, the separation wall controls 52% pollutant mass during a storm period (11.5 mm/hr rainfall intensity). Therefore, the Yongunchen combined sewer system (CSS) need separation wall to control and to prevent more pollutant input in stream. In Daesachen area, the maximum sewer flow rate during a storm period measured about 10 fold bigger than average sewer flow during dry periods. Also the concentrations between rainy and dry periods increase approximately 33 fold for BOD and 120 fold for SS. In Yongunchen area, it increases about 9 fold for the maximum flow rate, 18 fold for BOD and 22 fold for SS during a storm. Therefore, the research is concluded that the separation wall between stromwater (or ravine water) and sewage can decrease the dilution effect in CSS and control the pollutant loading.

• Water for future
• /
• v.26 no.1
• /
• pp.81-91
• /
• 1993

In this paper, a moving storm in the real watershed was simulated using a distributed model. Macks Creek Experimental Watershed in Idaho, USA was selected as a target watershed and the moving storm of August 23, 1965, which continued from 3:30 P.M. to 5:30 P.M., was utilized. The rainfall intensity of the moving storm in the watershed was temporally varied and the storm was continuously moved from one place to the other place in a watershed. Furthermore, runoff parameters, which are soil types, vegetative cover percentages, overland plane slopes, channel bed slopes and so on, are spatially varied. The model developed in the previous paper was utilized as a distributed model for simulating the moving storm. In the model, runoff in a watershed was simulated as two parts which are overland flow and channel flow parts. The good agreement was obtained between a simulated hydrograph using a distributed model and an observed hydrograph. Also, the conservations of mass are well indicated between upstream and downstream at channel junctions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1691-1695
• /
• 2010

본 연구에서 AFDA(Approximate Full Distribution Approach)를 사용하여 하수관의 불능확률을 정량적으로 산정할 수 있는 신뢰성 모형이 개발되었다. 여러 도시의 연 최대강우강도(Yearly Maximum Rainfall Intensity)를 이용하여 그 확률분포함수를 분석하였고 우수관(Storm sewer)의 불능확률 산정을 위한 신뢰성 모형에 적용하였다. 연 최대강우강도 자료의 분석결과 우리나라 중부지방의 여러 중소도시에 대한 연 최대강우강도의 확률분포함수는 Gumbel분포와 일치하는 것으로 나타났다. 신뢰성 모형은 불능확률의 신뢰함수를 구하기 위해 하중(Load)을 규정하는 식은 합리식이 사용되었고 용량(Capacity)를 규정하는 식은 Darcy-Weisbach공식과 Manning의 공식이 사용되었다. 이렇게 개발된 신뢰성 모형을 실제 우수관에 적용하여 불능확률을 산정하는 신뢰성 해석을 수행하였다. Y자형 우수관망에서 2개의 관으로 유입하는 각각의 유량이 그 관의 허용유량을 초과할 경우를 불능확률로 가정하였고, 나머지 관의 경우는 두 개의 관으로부터 유입하는 유량과 그 세 번째 관의 매설지역의 우수유입량의 합이 그 관의 허용유량을 초과할 경우를 불능상태(state of system failure)로 간주하여 불능확률을 정량적으로 산정하였다. Darcy-Weisbach공식과 Manning의 공식을 사용한 신뢰성 해석결과를 비교하였으며 우수관 직경의 변화에 따른 불능확률을 산정하였다. 특정한 수치(설계직경)이하일 경우 불능확률이 급격히 증가하는 것으로 나타났다. 따라서 실제 우수관의 유효직경이 설계직경에 항상 가깝도록 불순물을 제거하는 것이 최선의 관리 방법이며 불능확률을 줄이는 최선의 방법일 것이다. 본 연구에서 개발된 신뢰성 모형은 우수관의 운용, 관리, 감독은 물론 설계에 활용이 가능 할 것이다.