• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.222-234
• /
• 2020

Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.143-160
• /
• 2023

It is important to secure the golden time of emergency vehicles for quick responses in disaster situations, such as fire, rescue, and first aid. This study proposes plans Emergency Vehicle Preemption (EVP) based on the analysis of emergency vehicle operation to secure the golden time of emergency vehicles and increase driving safety. The emergency vehicle dispatch statistics, emergency vehicle traffic accident statistics, and survey were used for the analysis. As a result of the analysis, the frequency of dispatch of emergency vehicles and traffic accidents are increasing gradually, but the rate of securing the golden time of emergency vehicles is approximately half, indicating that improvement measures are urgent. In the questionnaire survey, most citizens consent to the necessity of introducing EVP. In addition, the criteria for the range of emergency vehicles that could provide EVP and the allowable time for waiting were derived. These results could be used to prepare EVP operation strategies, and it is expected to contribute to improving emergency vehicle operation safety and increasing the golden time securing rate through a rapid expansion of EVP.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.152-167
• /
• 2018

The high-speed weigh-in-motion system can collect the traveling speed and load information of individual vehicles, which can be used in a variety of ways for the traffic surveillance. However, it has a limit to apply the high-speed weigh-in-motion data directly to a safety analysis because high-speed weigh-in-motion's raw data are point measured data. In order to overcome this problem, this paper proposes a method to calculate the conflict rate and the Impulse severity based on surrogate safety measures derived from the detection time, detection speed, vehicle length, vehicle type, vehicle weight. It will be possible to analyze and evaluate the risk of rear-end collision on freeway traffic. In addition, this study is expected to be used as a fundamental for identifying crash risks and developing policies to enhance traffic safety on freeways.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.78-85
• /
• 2011

In vehicle ad-hoc network (VANET) environments, traffic related information such as accident information, emergency information and real time traffic condition have to be delivered to on-board-unit (OBU) or/and road-side-equipment (RSE) for preventing traffic accidents in advance. In this paper, we introduce a Multi-Channel MAC (MCM) since the existing single channel operation may cause packet transmission delay and unexpected communication failure. To offer a seamless safety message transmission during the various services, it is necessary to manage the MAC scheduler in wireless access in vehicular environments (WAVE) systems. The MCM consists of MAC softwares and MAC hardwares where the former and the later ones are implemented with real time operation system based C language and FPGA module with VHDL language, respectively. The performance and QoS are verified by practical measurements and compared with the scheme using single channel operation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.28-46
• /
• 2021

85-90% of the causes of traffic accidents are human factors, and autonomous vehicles with little free running distance can be an alternative to prevent traffic accidents caused by human factors. However, securing safety of autonomous vehicles should be preceded in order to reduce traffic accident damage through the introduction of autonomous vehicles. Therefore, it is necessary to verify whether the vehicle can respond appropriately to changes in the road and traffic environment through repeated and reproduced test runs in an environment similar to the actual road. In this study, K-City's development strategies for upgrading, differentiating, and systematic development were established by comparing and analyzing the current status of domestic and foreign testbeds and business environment analysis. Furthermore, we derive challenge tasks to achieve each strategy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1401-1407
• /
• 2002

This paper represents an investigation of the vehicle-to-vehicle distance control system using Hardware-in-the-Loop Simulation(HiLS). Control logic is primarily developed and tested with a specially equipped test vehicle. Establishment of an efficient and low cost development tool is a very important issue, and test vehicle approach is costly and time consuming. HiLS method is useful in the investigation of driver assistance and active safety systems. The HiLS system consists of a stepper motor for throttle control, a hydraulic brake system with an electronic vacuum booster, an electronic controller unit, a data logging computer which are used to save vehicle states and signals of actuator through a CAN and a simulation computer using mathematical vehicle model. Adaptation of a CAN instead of RS-232 Serial Interface for communication is a trend in the automotive industry. Since this environment is the same as a test vehicle, a control logic verified in laboratory can be easily transferred to a test vehicle.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.3
• /
• pp.199-209
• /
• 2015

This paper presents a model predictive control (MPC) approach to control the steering angle in an autonomous vehicle. In designing a highly automated driving control algorithm, one of the research issues is to cope with probable risky situations for enhancement of safety. While human drivers maneuver the vehicle, they determine the appropriate steering angle and acceleration based on the predictable trajectories of surrounding vehicles. Likewise, it is required that the automated driving control algorithm should determine the desired steering angle and acceleration with the consideration of not only the current states of surrounding vehicles but also their predictable behaviors. Then, in order to guarantee safety to the possible change of traffic situation surrounding the subject vehicle during a finite time-horizon, we define a safe driving envelope with the consideration of probable risky behaviors among the predicted probable behaviors of surrounding vehicles over a finite prediction horizon. For the control of the vehicle while satisfying the safe driving envelope and system constraints over a finite prediction horizon, a MPC approach is used in this research. At each time step, MPC based controller computes the desired steering angle to keep the subject vehicle in the safe driving envelope over a finite prediction horizon. Simulation and experimental tests show the effectiveness of the proposed algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.73-84
• /
• 2010

This study presents a novel method to identify hazardous segments of freeway using global positioning system(GPS) based probe vehicle data. A variety of candidate contributing factors leading to higher potential of accident occurrence were extracted from the probe vehicle dataset. The research problem was defined as a classification problem, then a well-known classifier, bayesian neural network was adopted to solve the problem. A binary logistic regression technique was also used for selecting salient input variables. Test results showed that the proposed method is promising in extracting hazardous freeway sections. The outcome of this study will be effectively used for evaluating the safety of freeway sections and deriving countermeasures to prevent accidents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.26-32
• /
• 2016

An autonomous car(driverless car, self-driving car, robotic car) is a vehicle that is capable of sensing its environment and navigating without human input. Autonomous cars can detect surroundings using a variety of techniques such as radar, lidar, GPS, odometry, and computer vision. Advanced control systems interpret sensory information to identify appropriate navigation paths, as well as obstacles and relevant signage. Autonomous cars have control systems that are capable of analyzing sensory data to distinguish between different cars on the road, which is very useful in planning a path to the desired destination. An issue tree, also called a logic tree, is a graphical breakdown of a question that dissects it into its different components vertically and that progresses into details as it reads to the right.Issue trees are useful in problem solving to identify the root causes of a problem as well as to identify its potential solutions. They also provide a reference point to see how each piece fits into the whole picture of a problem. Using Issue-Tree menthods, transportation safety policies were developed with autonompus vehicle in mind.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.65-77
• /
• 2013

Recent advanced sensors and communication technologies have been widely applied to advanced safety vehicle (ASV) for reducing traffic accident and injury severity. To apply the advanced safety vehicle technologies, it is important to quantify the safety benefits, which is a fundamental for justifying application. This study proposed a methodology for quantifying the effectiveness of the advanced driver assistant system (ADAS), and applied the methodology to lane departure warning system (LDWS) and automatic emergency braking system (AEBS) which are typical advanced driver assistant systems. When the proposed methodology is applied to 2008-2010 gyeonggi-province crash data, LDWS would reduce about 10~14% of relevant crashes such as head-on, run-off-the road, rollover and fixed-object collisions on the road. In addition, AEBS could potentially prevent about 50% of total rear-end crashes. The outcomes of this study support decision making for developing not only vehicular technology but also relevant safety policies.