• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.413-421
• /
• 2012

The purpose of this study is to evaluate the structural dynamic behavior under hybrid control system. The hybrid test is to consider the interaction between the numerical and physical models. In this paper, single degree of freedom hybrid test was performed with one-bay, two-story steel frame structure. One column at the first floor was selected as a physical substructure and one actuator was used for applying the displacement load in horizontal direction. El Centro as earthquake waves was inputted and OpenSees was employed as the numerical analysis program for the hybrid real-time simulation. As a result, the total time of the hybrid test was about 9.6% of actual measured seismic period. The experimental results agreed well with the numerical one in terms of the maximum displacement. In nonlinear analysis, however, material nonlinearity made a difference of residual strain. Therefore, this hybrid dynamic test can be used to predict the structural dynamic performance more effectively than shaking table test, because of the spatial and economic limitations.

• International Commerce and Information Review
• /
• v.18 no.4
• /
• pp.263-281
• /
• 2016

The Importance of SEP (Standard Essential Patents) Procurement Operation is on the side of Governmental and Public both to accelerate the national trade negotiation competitiveness. To operate cooperative system of SEP creation and management, Government should monitor the effect and performance periodically to public sectors. and To achieve the support objectives, it should establish the virtuous circle infrastructure between R&D and economic performance on SEP. This can make the SEP enhancement to pursue the international competitiveness on Intellectual Property Rights. Especially the specific support approach to each phase of the SEP declaration matrix is essential to consolidate the possibility of SEP creation and acquisition. In this study, the concepts of SEP to accelerate the national trade negotiation competitiveness and the prior research were verified through the investigation of market trend and current state of affair analysis. Through the analysis of international and domestic situation of SEP procurement and management, We have found the results as follows. First of all, the leading conglomerates and the Government should focus on the secondary and tertiary industries to create and acquire SEPs to accomplish the effectiveness of selection and concentration. In second, the SMEs and Univ. Labs should focus on the quaternary sector of the economy to retain the competitiveness of speed and challenge on SEP related. From this study, the appropriateness of the tailored-support management model should be institutionalized, and the results implied an research in order to examine the suitability among the current SEP to enhance the competitiveness of national trade research issues.

• The Journal of Society for e-Business Studies
• /
• v.25 no.3
• /
• pp.109-130
• /
• 2020

Recently, the importance of research and development for technological innovation is increasing. The rapid development of research and development has a number of positive effects, but at the same time there are also negative effects that accelerate crimes of information and technology leakage. In this study, a research security level measurement model was developed that can safely protect the R&D environment conducted at the organizational level in order to prepare for the increasingly serious R&D result leakage accident. First, by analyzing and synthesizing security policies related to domestic and overseas R&D, 10 research security level evaluation items (Research Security Promotion System, Research Facility and Equipment Security, Electronic Information Security, Major Research Information Security Management, Research Note Security Management, Patent/Intellectual Property Security Management, Technology Commercialization Security Management, Internal Researcher Security Management, Authorized Third Party Researcher Security Management, External Researcher Security Management) were derived through expert interviews. Next, the research security level evaluation model was designed so that the derived research security level evaluation items can be applied to the organization's research and development environment from a multidimensional perspective. Finally, the validity of the model was verified, and the level of research security was evaluated by applying a pilot target to the organizations that actually conduct R&D. The research security level evaluation model developed in this study is expected to be useful for appropriately measuring the security level of organizations and projects that are actually conducting R&D. It is believed that it will be helpful in establishing a research security system and preparing security management measures. In addition, it is expected that stable and effective results of R&D investments can be achieved by safely carrying out R&D at the project level as well as improving the security of the organization performing R&D.

• International Commerce and Information Review
• /
• v.17 no.2
• /
• pp.227-251
• /
• 2015

Purpose - The purpose of the paper is to show that the Effects of graduate wages on support program of UIC is the main topic, due to point of view of the need for change from school-level to student-level. UIC support program is divided into four areas: infra, education, Commercialization, start-up. Design/Methodology - Data were collected three survey from a University UIC Survey(2012) and Self-diagnostic research(2012), and Employment Training Panel(2012). UIC support program is divided into four areas, and graduate wages is researched Average monthly wage, bonuses, additional duty allowance. Statistical methods is used basic statistics, crosstabs, regression analysis Findings -There is was much higher effects in total wages of three variable, first on much Intellectual Property Registration(IP) in university teachers, second university students have founded a private space for start-up, and third much national certification staff from the university. Implications - The issue is that UIC education can not be greater practical effect on the wages of graduates yet. Actively support and quality training support from the government in the UIC program is expected to be followed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.150-150
• /
• 2017

조립라인에서 볼트의 수량을 정확하게 검출하는 장치는 작업속도의 향상 및 불량발생을 줄이기 위해 필요한 것이다. 현재 조립에 필요한 수량을 작업자의 시각에 의해 파악하고 있기 때문에 작업시간이 증가되고 있으며 특히 조립 과정 중 작업자의 실수로 볼트가 제품의 내부에 침투하여 제품의 소음, 성능저하 및 수명단축을 초래하고 있다. 본 연구에서는 작업자의 편의성 및 조립속도 향상을 위해 볼트를 감지하여 자동으로 수량을 검출하는 장치를 개발하였다. 볼트의 특성에 따라 볼트 선별부의 치수를 수정하면 되도록 하였다. 조립라인의 생산성을 향상시키기 위한 설계는 Auto CAD를 이용하였다. 조립라인의 공간 효율 증가를 위하여 볼트 수량 검출기의 가로${\times}$세로의 크기를 최소로 하여 $220{\times}360{\times}1170mm$로 설계하였다. 받침대는 $60{\times}60$ 프로파일을 이용하였고 다른 구성 부품은 SUS304 재질을 가공하여 조립하였다. 실험은 실험구 마다 100회 측정하여 평균값을 나타냈으며, 소수점은 시스템에 영향이 없기 때문에 절사하였다. Test 19-27 구간이 배출부가 가장 적게 구동하는 것으로 나타났다. 정렬부의 각도가 10, $15^{\circ}$의 경우는 볼트와 배출부의 마찰력이 증가하여 구동횟수가 증가한 것으로 판단된다. $20^{\circ}$이상의 각도에서는 볼트가 배출부에 안착하기 전에 하강하기 때문에 반복횟수가 증가한 것으로 판단된다. 따라서 최적의 정렬부 각도는 $20^{\circ}$로 나타났다. 볼트의 지름이 3, 5, $7{\phi}$ 일 때 정렬부의 각도에 따른 정렬부의 반복횟수에 대한 결과 값을 한 결과 $20^{\circ}$에서 정렬부의 구동횟수가 가장 적은 것 으로 나타났다. 정렬부의 각도가 큰 경우 구동에 의한 볼트와의 운동에너지의 증가로 반복횟수가 증가한 것으로 판단된다.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.87-96
• /
• 2015

Geosynthetics are widely used in different ways such as reinforcement of structures in road, railway, harbor and dam engineering, drainage, separation and erosion prevention. They are especially applied to reinforced retaining wall and slope or ground reinforcement. Recently, geosynthetics reinforced pile supported (GRPS) embankment was developed to improve stability and construability of embankments in railway engineering. Extension strains are usually measured by strain gauges adhered to geosynthetics to evaluate the stability of geosynthetics. However, the measurements are influenced by manufacturing method and stiffness of geosynthetics and also adherence of strain gauge. In this study, wide-width tensile strength tests were performed on three types of geosynthetics including geogrid, woven geotextile and non-woven geotextile. During the test, strains of geosynthetics were measured by both video extensometer and strain gauges adhered to the geosynthetics and the measured results were compared. Results show that the measured results by strain gauges have high reliability in case of large stiffness geosythetics like geogrid and woven geotextile, whereas they have very low reliability for small stiffness geosythetics like non-woven geotextile.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.6 s.312
• /
• pp.101-109
• /
• 2006

Recently, according to the number of internet in widely use and the development of the related application program, the distribution and use of multimedia content(text, images, video, audio etc.) is very easy. Digital signal may be easily duplicated and the duplicated data can have same quality of original data so that it is difficult to warrant original owner. For the solution of this problem, the protection method of copyright which is encipher and watermarking. Digital watermarking is used to protect IP(Intellectual Property) and authenticate the owner of multimedia content. In this paper, the proposed watermarking algerian embeds watermark into multiple lower bitplanes of digital image. In the proposed algorithm, original and watermark images are decomposed to bitplanes each other and the watermarking operation is executed in the corresponded bitplane. The position of watermark image embedded in each bitplane is used to the watermarking key and executed in multiple lower bitplane which has no an influence on human visual recognition. Thus this algorithm can present watermark image to the multiple inherent patterns and needs small watermarking quantity. In the experiment, the author confirmed that it has high robustness against attacks of JPEG, MEDIAN and PSNR but it is weakness against attacks of NOISE, RNDDIST, ROT, SCALE, SS on spatial domain when a criterion PSNR of watermarked image is 40dB.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.3
• /
• pp.85-98
• /
• 2018

This study aims to investigate the effects of venture & inno-biz companies' technological innovation competences on technological performances and economic competitive advantage, using VRIO framework. The empirical data for this study were based on the technology assessment results of Korea Technology Finance Corporation (KOTEC) on 3,462 venture & inno-biz companies and the following 2 years' financial data. Sample companies with technological innovation resources, such as technology management strategy(Value), differentiation of technology(Rarity), imitation difficulty of technology(Imitability) and technical organization capability(Organization), made efforts to expand their intellectual property rights, technological development and commercialization of new products, thereby ensuring technological competitive advantage. Furthermore, technological competitive advantage were proved to improve sales growth, increase in operating revenue, and financial soundness. Compared with four VRIO factors' influence on business performance, imitation difficulty of technology(Imitability) and organization technological capability(Organization) had much more influence than any other internal resources or capabilities respectively.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.1
• /
• pp.61-68
• /
• 2013

As modern society changes toward knowledge based society, the patent policy and professional manpower need to be changed because interest and importance about patent, trademarks, intellectual property right and copyright of business secret are increasing. In order to facilitate trading of the technology developed in the private sector and to promote the business, the Act of technology transfer and commercialization promotion is prepared. In the law, the article 14 says that who have expertise on commercialization of the technology transfer can be registered as a technology trader to the Minister of Knowledge Economy. For the purpose of finding improvements of the technology trader's registration system, comparison method was studied. Technology trader compare with licensed real estate agent which is similar with it in terms of trade. There are several results from this study by followings. The unique tasks of technology traders should be specified for increasing authority of technology transfer expert. Manual criteria of post management should be prepared through registration certificate management agency which operated by charging. In addition, The announcement document should be prepared carefully for necessity of announcement and registration criteria of technology trading business. These improvements are enable to motivate trading market and impact to expand the base of technology marketing and technology transfer-commercialization.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.344-351
• /
• 2013

Microsatellite is one of the most suitable marker for cultivar identification as it has great discrimination power for cultivars with narrow genetic variation. The polymorphism level between 358 microsatellite primer pairs and 11 commercial cucumber cultivars was investigated. Thirty-one primer pairs showed high polymorphism within cucumber cultivars with different fruit types. These markers were applied for the constructing DNA profile data base of 110 commercial cucumber cultivars through multiplex PCR and fluorescence based automatic detection system. A total of 139 polymorphic amplified fragments were obtained by using 31 microsatellite markers. The average of PIC value was 0.610 ranging from 0.253 to 0.873. One hundred and thirty nine microsatellite loci were used to calculate Jaccard's distance coefficients for UPGMA cluster analysis. A clustering group of varieties, based on the results of microsatellite analysis, were categorized into plant shape and fruit type. Almost the cultivars were discriminated by marker genotypes. This information may be useful to compare through genetic relationship analysis between existing variety and candidate varieties in distinctive tests and protection of plant breeders' intellectual property rights through variety identification.