• Journal of Korean Critical Care Nursing
• /
• v.1 no.1
• /
• pp.73-83
• /
• 2008

Purpose: Purpose of this study was to analyze the nursing focuses for standardization of ICU nursing records. Methods: The data were collected from 1,000days'nursing records of 197 ICU patients at a tertiary hospital in Seoul. Nursing focuses were unified at the consulting group meeting and they were cross-mapped with the NANDA nursing diagnoses. Results: The 62 nursing focuses in 7 NANDA categories were extracted from nursing record. Among total nursing focuses 41 correspond to the NANDA nursing diagnoses and 21 were added to ICU nursing focuses. The 10 most frequently used nursing focuses are 'Ineffective airway clearance', 'Impaired gas exchange', 'Ineffective tissue perfusion: cardiopulmonary', 'Ineffective breathing pattern', 'Ineffective tissue perfusion: renal', 'Ineffective infant feeding pattern', 'Risk for impaired skin integrity', 'Hyperthermia', 'Impaired skin integrity', 'Decreased cardiac output', Conclusion: Nursing focuses list of ICU was extracted from the result of this study. These nursing focuses might form a framework for development of research-based assessment guideline and care plans for ICU patients through standardization of nursing records.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.665-671
• /
• 2013

In a Korean Generation IV prototype sodium-cooled fast reactor (SFR), various types of high-temperature heat exchangers such as IHX (intermediate heat exchanger), DHX (decay heat exchanger), AHX (air heat exchanger), FHX (finned-tube sodium-to-air heat exchanger), and SG (steam generator) are to be designed and installed. In this study, the high-temperature design and integrity evaluation of the sodium-to-air heat exchanger AHX in the STELLA-1 (sodium integral effect test loop for safety simulation and assessment) test loop already installed at KAERI (Korea Atomic Energy Research Institute) and FHX in the SEFLA (sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger) test loop to be installed at KAERI have been performed. Evaluations of creep-fatigue damage based on full 3D finite element analyses were conducted for the two heat exchangers according to the high-temperature design codes, and the integrity of the high-temperature design of the two heat exchangers was confirmed.

• Tribology and Lubricants
• /
• v.32 no.4
• /
• pp.113-118
• /
• 2016

As an economic, high quality, and highly reliable gear with low noise and low vibration is demanded, an overall finite element analysis regarding a gear is required. Also, an infrared thermography test, which is a quantitative testing technique, is demanded for safety and longer lifespan of gear products. In order to manufacture a gear product or to determine safety of a gear being used, it is necessary to precisely determine ingredients of a material constituting a gear and detect any internal defect. This study aims to realize a design that minimizes the spur gear displacement with respect to power during its rotation and ensures the spur gear control capacity by using a 3D model and the midasNFX program. This facilitates the assessment of the possibility of cracking by evaluating the stress intensity and focusing on the integrity of the spur gear. We prepare the specimen of the spur gear based on the possibility of cranking as per the result of the structural interpretation from an infrared ray thermal measuring technique. After cooling the spur gear, we perform experiments using thermography and halogen lamps and analyze the temperature data according to the results of the experiment. In the experiment which we use thermography after cooling, we find a rise in the temperature of the room. As a result, the defective part show temperatures lower than their surroundings while the normal parts have temperatures higher than the defective parts. Therefore, it possible to precisely identify defective part owing to its low temperature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1251-1259
• /
• 2013

In this study, high temperature design and creep-fatigue damage evaluation of a decay heat exchanger (DHX) in the decay heat removal systems of a sodium-cooled fast reactor (SFR) have been performed. Detail design and 3D finite element analysis have been conducted for the DHXs to be installed in active and passive decay heat removal systems in Korean Generation IV SFR, and the DHX installed in the STELLA-1(Sodium integral effect test loop for safety simulation and assessment) at KAERI (Korea Atomic Energy Research Institute). Evaluations of creep-fatigue damage based on full 3D finite element analyses were conducted for the two Mod.9Cr-1Mo steel heat exchangers according to the elevated temperature design codes of ASME Section III Subsection NH and RCC-MR code. Code comparisons were made based on the creep-fatigue damage evaluation and issues on conservatisms of the design codes were discussed.

• Fire Science and Engineering
• /
• v.27 no.5
• /
• pp.26-31
• /
• 2013

In nuclear power plant, anchor bolts for pressurizer supports are sufficiently used in terms of safety reason, but field inspections have reported that some bolts exceed the limit of their allowable hardness. Because the high level of hardness may lead to failures due to the stress corrosion or fracture toughness, a regular inspection is required for the bolts in nuclear power plant. Thus, this research measures the hardness of bolts currently used in pressurizer supports and then estimates maximum allowable stresses preventing failures by stress corrosion and fracture toughness. Using the ANSYS program, the stresses of the bolts in the regular condition and accidental condition have been calculated, and the possible maximum stress has been compared with the estimated allowable stresses. From the results, the stresses of bolts in the accidental condition satisfy the allowable safety stress from the stress corrosion failure. However, in the future, it shall be needed to consider the reflection of the structure assembling method on the assembling procedure to ensure the pressurizer integrity during maintenance period time.

• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.20-27
• /
• 2005

This paper evaluates the fire safety level of eight pump rooms in the nuclear power plant using a fire model, CFAST We estimate the Conditional Core Damage Probability (CCDP) of each room based on the analyzed results of CFAST Eight rooms located on the primary auxiliary building of the nuclear power plant are high pressure safety injection pump room A/B, low pressure safety injection pump room Am. containment sprdy pump room A/B, and motor-driven auxiliary feed water pump room A/B. The upper layer gas temperature of each room is estimated and the integrity of cable is reviewed. Based on the results, the integrity of the cable located at the upper part of compartment is maintained without thermal damage. The Conditional Core Damage Probability Is reduced to half of the old values. Accordingly, the fire safety assessment for eight pump rooms using the fire model will be capable of reducing the uncertainty and to develop a more realistic model.

• Journal of Radiation Industry
• /
• v.18 no.2
• /
• pp.133-140
• /
• 2024

The Korean 2^nd basic plan for management of high-level radioactive waste presented a plan to manage spent nuclear fuel through dry storage facilities in NPP on-site. For the construction and operation of the facility, it is necessary to develop the monitoring system of the integrity of spent nuclear fuel before operation. NUREG-1536 recommends that the theoretical cask array, typically in the 2×10 array, should account for shadowing effect among the dry storage casks. The objective of this study was to evaluate neutron flux accounting for shadowing effect among dry storage casks. The neutron release rate was evaluated using ORIGEN based on the design basis fuel condition. And the simulation of dry storage casks and evaluation of the shadowing effect were performed using MCNP. Shadowing effect of other dry storage casks was the highest at the center of the dry storage facility of the 2×10 array compared with the outside of the cask. The shadowing effect of neutron flux on the surface among the metal casks was approximately 18% at point 1, 23% at point 2, and 43% at point 3. For the concrete casks, the shadowing effect of neutron flux on the surface was approximately 46% at point 1, 51% at point 2, and 52% at point 3. This means that correction is necessary to monitor the integrity of spent nuclear fuel in each dry storage cask through evaluation of shadowing effect. The results of this study will be used for comparative analysis of neutron measurement data from spent nuclear fuels in dry storage cask. Additionally, the neutron flux evaluation procedure used in this study could be used as the basic data of safety assessment of dry storage cask and development of safety guide.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2015

Wind power systems have gained much attention due to the relatively high reliability, good infrastructures and cost competitiveness to the fossil fuels. Advances have been made to increase the power efficiency of wind turbines while less attention has been focused on structural integrity assessment of structural sub-systems such as towers and foundations. Among many parameters for integrity assessment, the most perceptive parameter may be the induced horizontal displacement at the hub height although it is very difficult to measure particularly in large-scale and high-rise wind turbine structures. This study proposes an indirect displacement estimation scheme based on the combined use of inclinometers and accelerometers for more convenient and cost-effective measurements. To this end, (1) the formulation for data fusion of inclination and acceleration responses was presented and (2) the proposed method was numerically validated on an NREL 5 MW wind turbine model. The numerical analysis was carried out to investigate the performance of the propose method according to the number of sensors, the resolution and the available sampling rate of the inclinometers to be used.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.652-672
• /
• 1996

Dysfunction of the inferior alveolar nerve may result from trauma, diseases or iatrogenic injury. The development and refinement of an objective method to evaluate this clinical problem is highly desirable and needed, especially concerning for an increasing medico-legal issue. Evoked potential techniques have attracted considerable attention as a means of assessing the function and integrity of nerve pathways. The purpose of this study was to characterize the Sensory Evoked Potentials(SEPs) and Somatosensory Evoked Potentials(SSEPs) elicited by electrical stimulation of mental nerve. SEPs and SSEPs were measured and analyzed statistically before and after needle injury on the inferior alveolar nerve of Sprague-Dawalye rats. Measuring SEPs was more sensitive in evaluation of the recovery of sensory function from inferior alveolar nerve injury then measuring SSEPs but we measured SSEPs in the hope of providing a safe, simple and objective test to check oral and facial sensibility, which is acceptable to the patient. We stimulated mental nerve after needle injury on the inferior alveolar nerve and SEPS on the level of mandibular foramen and SSEPs on the level of cerebral cortex were recorded. Threshold, amplitude, and latency of both of SEPs and SSEPs were analyzed. The results were as follows ; 1. Threshold of SEPs and SSEPs were $184{\pm}14{\mu}A$ and $164{\pm}14{\mu}A$ respectively. 2 SEPs were composed of 2 waves, i.e., N1 N2 in which N1 was conducted by II fibers and N2 was conducted by III fibers. 3. SSEPS were composed of 5 waves, of which N1 and N2 shower statistically significant changes(p<0.01, unpaired t-test). 4. SEPs and SSEPs were observed to be abolished immediately after local anesthesia and recovered 30 minutes later. 5. SEPs were abolished immediately after injury. N1 of SSEPs was abolished immediately and amplitued of N2 was decreased($20.7{\pm}12.2%$) immediately after 23G needle injury, but N3, N4 and N5 did not change significantly. Recovery of waveform delayed 30 minutes in SEPs and 45 minutes in SSEPs. 6. The degree of decrease in amplitude of SEPs and SSEPs, after 30G needle injury was smaller than those with 23G. SEPs recorded on the level of mandibular foramen were though to be reliable and useful in the assessment of the function of the inferior alveolar nerve after injury. Amplitude of SSEPs reflected the function and integrity of nerve and measuring them provided a safe, simple and abjective test to check oral and facial sensibility. These results suggest that measuring SEPs and SSEPs are meaningful methods for objective assessment in the diagnosis of nerve injury. N1 and N2 of SSEPs can be useful parameters for the evaluation of the nerve function following a needle injury.

• Korean Journal of Ecology and Environment
• /
• v.51 no.1
• /
• pp.86-95
• /
• 2018

The objective of this study was to describe the development and testing of an initial ecological health assessment model, based on the index of biological integrity (IBI) using fish assemblages, before establishing the final and currently used model for ecological health assessment, conservation and management of freshwater fish in Korea. The initial fish IBI model was developed during 2004~2006 and included 10 metrics, and in 2007 the final IBI 8-metric model was established for application to streams and rivers in four major Korean watersheds. In this paper, we describe how we developed fish sampling methods, determined metric attributes and categorized tolerance guilds and trophic guilds during the development of the multi-metric model. Two of the initial metrics were removed and the initial evaluation categories were reduced from six to four (excellent, good, fair, poor) before establishing the final national fish model. In the development phase, IBI values were compared with chemical parameters (BOD and COD as indicators of organic matter pollution) and physical habitat parameters to identify differences in IBI model values between chemical and physical habitat conditions. These processes undertaken during the development of the IBI model may be helpful in understanding the modifications made and contribute to creating efficient conservation and management strategies for stream environments to be used by limnologists and fish ecologists as well as stream/watershed managers.