• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.427-434
• /
• 2000

The paper proposes a zero speed start-up scheme of direct rector controlled induction motor drive without any torque jerk. At standstill condition, a method is derived to calculate a stator flux with only stator current. The programmable 3-stage low pass filters with programmable time constants is used in order to solute the problem of integration for stator flux estimation in the direct vector control mode. Due to the time delay of 3-stage low pass filter, the status flux decreases rapidly and also the torque jerk occurs during the transition from standstill mode to the direct rector control mode. A feedforward control strategy of the stator flux is suggested to prevent the torque jerk at start-up. Through results of simulation and experiment with 32 bit DSP, the performance of the start-up scheme is verified.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.208-222
• /
• 2015

For the performance-efficient integration of IPs on an SoC utilizing heterochronous multi-clock domains, we propose a synchronization scheme that causes low latency overhead when data are crossing clock boundaries. The proposed synchronization scheme is composed of a clock predictor and a synchronizer. The clock predictor of a sender clock domain produces a predicted clock that is used in a receiver clock domain to detect possible synchronization failures in advance. When the possible synchronization failures are detected, a synchronizer at the receiver delays data-capture times to avoid the possible synchronization failures. From the simulation of the proposed scheme through SPICE modeling using a Chartered $0.18{\mu}m$ CMOS process, we verified the functionalities and timing behavior of the clock predictor and the synchronizer. The simulation results show that the clock predictor produces a predicted clock before a synchronization failure, and the synchronizer samples data correctly using the predicted clock.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.576-582
• /
• 2011

This paper presents a novel control strategy for selective compensation of power quality (PQ) problems, depending upon the limited rating of voltage source inverters (VSIs), through a unified power quality conditioner (UPQC) in a three-phase four-wire distribution system. The UPQC is realized by the integration of series and shunt active power filters (APFs) sharing a common dc bus capacitor. The shunt APF is realized using a three-phase, four-leg voltage source inverter (VSI), while a three-leg VSI is employed for the series APF of the three-phase four-wire UPQC. The proposed control scheme for the shunt APF, decomposes the load current into harmonic components generated by consumer and distorted utility. In addition to this, the positive and negative sequence fundamental frequency active components, the reactive components and harmonic components of load currents are decomposed in synchronous reference frame (SRF). The control scheme of the shunt APF performs with priority based schemes, which respects the limited rating of the VSI. For voltage harmonic mitigation, a control scheme based on SRF theory is employed for the series APF of the UPQC. The performance of the proposed control scheme of the UPQC is validated through simulations using MATLAB software with its Simulink and Power System Block set toolboxes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.9
• /
• pp.3365-3383
• /
• 2021

The rapid growth of data has successfully promoted the development of modern information and communication technologies, which are used to process data generated by public urban departments and citizens in modern cities. In specific application areas where the ciphertext of messages generated by different users' needs to be transmitted, the concept of broadcast encryption is important. It can not only improve the transmission efficiency but also reduce the cost. However, the existing schemes cannot entirely ensure the privacy of receivers and dynamically adjust the user authorization. To mitigate these deficiencies, we propose an efficient, secure identity-based broadcast encryption scheme that achieves direct revocation and receiver anonymity, along with the analysis of smart grid solutions. Moreover, we constructed a security model to ensure wireless data transmission under cloud computing and internet of things integrated devices. The achieved results reveal that the proposed scheme is semantically secure in the random oracle model. The performance of the proposed scheme is evaluated through theoretical analysis and numerical experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.794-815
• /
• 2023

The rapid development of mobile communication not only has made the industry gradually diversified, but also has enhanced the service quality requirements of users. In this regard, it is imperative to consider jointly network slicing and mobile edge computing. The former mainly ensures the requirements of varied vertical services preferably, and the latter solves the conflict between the user's own energy and harsh latency. At present, the integration of the two faces many challenges and need to carry out at different levels. The main target of the paper is to minimize the energy consumption of the system, and introduce a multi-slice joint task offloading and resource allocation scheme for massive multiple input multiple output enabled heterogeneous networks. The problem is formulated by collaborative optimizing offloading ratios, user association, transmission power and resource slicing, while being limited by the dissimilar latency and rate of multi-slice. To solve it, assign the optimal problem to two sub-problems of offloading decision and resource allocation, then solve them separately by exploiting the alternative optimization technique and Karush-Kuhn-Tucker conditions. Finally, a novel slices task offloading and resource allocation algorithm is proposed to get the offloading and resource allocation strategies. Numerous simulation results manifest that the proposed scheme has certain feasibility and effectiveness, and its performance is better than the other baseline scheme.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.563-573
• /
• 2006

Cyber-infrastructures for scientific and engineering applications require integrating heterogeneous legacy data in different formats and from various domains. Such data integration raises challenging issues: (1) Support for multiple independently-managed schemas, (2) Ease of schema evolution, and (3) Simple schema mappings. In order to address these issues, we propose a novel approach to semantic integration of scientific data which uses XML schemas and RDF-based schema mappings. In this approach, XML schema al-lows scientists to manage data models intuitively and to use commodity XML DBMS tools. A simple RDF-based ontological representation scheme is used for only structural relations among independently-managed XML schemas from different institutes or domains We present the design and implementation of a prototype system developed for the national cyber-environments for civil engi-neering research activities in Korea (similar to the NEES project in USA) which is called KOCEDgrid (http://www.koced.net).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.211-218
• /
• 1997

Since Industrial Revolution, the sudden industrialization and population explosion have brought about a serious environmental pollution on the air of the earth, the quality of water and the soil, and the greenhouse effect by the destruction of the ozone layer and the greenhouse gas, the organism diversity decline, the desertification by the ruining of woods and the overall global environmental pollution such as the contamination of the ocean and rivers have been come to the front. So the new recognition on the environment is being spreaded in construction business and the efforts for certification acquisition of ISO 14000 being followed by ISO 9000 are progressing, Accordingly, with an example of H Company where integration system is built so that it can minimize the efforts and cost at the construction of the management system, operation and management after the fact, this paper shall suggest the practical scheme of 3 steps through a study to integrate both existing quality management system and new environmental management system. As the integration system of the quality and environment which is constructed by this method is executed, the number of the established and managed document is cut by about a third and so the disorder to encounter between these documents is prevented and unnecessary efforts is reduced in constructing a system, consequently the efficiency of the system is accomplished. Also as the dualization of quality management system and environmental management system additionally needs more men and money after certification acquisition, the non-construction of the integration system may give rise to a cause to aggravate the burden of the company and hereafter when a new system is imported, it may be very difficult to integrate the system. This system integration enables a efficient and effective system to be constructed , operated , and managed after the fact.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.260-263
• /
• 2003

This paper has developed the computer integration manufacturing system and Internet based tele-operations. The functions of CIMS include production planing, material requirement planning, work order generation, process control, quality control, shipping planning, warehouse and inventory management and material cost accounting.[1] In this paper focuses on the automatic warehouse control and inventory management by developing the information system as well as the Internet-based integration. The system overview is divided into three parts, the mechanical system, the computer and developed software to control and manage the information and the communication system. The mechanical system consists of the warehouse machine and forklift mobile robot controlled by programmable logic controller (PLC). The computer works on many functions such as control station interfaces with PLC, managing database and inventory, and Internet server to broadcast the inventory database to users via World Wide Web and monitoring the operation on web camera. Our scheme the inventory database can be checked easily anywhere and anytime when the users connect to the Internet. In this article, the lead-time and inventory level can be reduced therefore the holding cost and operating time is also decreased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.848-854
• /
• 2006

In this study, a computational analysis system has been developed in order to investigate flow-induced vibration(FIV) phenomenon for general stator-rotor cascade configurations. Relative movement of the rotor with respect to stator is reflected by modeling independent two computational domains. Fluid domains are modeled using the unstructured grid system with dynamic moving and local deforming methods. Unsteady, Reynolds-averaged Navier-Stokes equations with one equation Spalart-Allmaras and two-equation SST $k-\omega$ turbulence models are solved for unsteady flow problems. A fully implicit time marching scheme based on the Newmark direct integration method is used flow computing the coupled governing equations of the fluid-structure interaction problem. Detailed FIV responses for different flow conditions are presented with respect to time and vibration characteristics are also physically investigated in the time domain.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.275-280
• /
• 2009

While database(DB) and information retrieval(IR) have been developed independently, there have been emerging requirements that both data management and efficient text retrieval should be supported simultaneously in an information system such as health care, customer support, XML data management, and digital libraries. The great divide between DB and IR has caused different manners in index maintenance for newly arriving documents. While DB has extended its SQL layer to cope with text fields due to lack of intact mechanism to build IR-like index, IR usually treats a block of new documents as a logical unit of index maintenance since it has no concept of integrity constraint. However, In the DB-IR integrations, a transaction on adding or updating a document should include maintenance of the posting lists accompanied by the document. Although DB-IR integration has been budded in the research filed, the issue will remain difficult and rewarding areas for a while. One of the primary reasons is lack of efficient online transactional index maintenance. In this paper, performance of a few strategies for per-document basis transactional index maintenance - direct index update, pulsing auxiliary index and posting segmentation index - will be evaluated. The result shows that the pulsing auxiliary strategy and posting segmentation indexing scheme, can be a challenging candidates for text field indexing in DB-IR integration.