• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1269-1289
• /
• 2014

With the sub-stepping technique, the numerical analysis in real-time dynamic hybrid testing is split into the response analysis and signal generation tasks. Two target computers that operate in real-time may be assigned to implement these two tasks, respectively, for fully extending the simulation scale of the numerical substructure. In this case, the integration time-step of solving the dynamic response of the numerical substructure can be dozens of times bigger than the sampling time-step of the controller. The time delay between the real and desired feedback forces becomes more striking, which challenges the well-developed delay compensation methods in real-time dynamic hybrid testing. This paper focuses on displacement prediction and force correction for delay compensation in the real-time dynamic hybrid testing with a large integration time-step. A new displacement prediction scheme is proposed based on recently-developed explicit integration algorithms and compared with several commonly-used prediction procedures. The evaluation of its prediction accuracy is carried out theoretically, numerically and experimentally. Results indicate that the accuracy and effectiveness of the proposed prediction method are of significance.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.497-500
• /
• 2005

Research and development of remote sensing technique is necessary so that more accurate and extensive information may be obtained. To achieve this goal, the synthesized technique which integrates the high resolution optic and SAR image, and topographical information was examined to investigate the quantitative/qualitative characteristics of the Earth's surface environment. For this purpose, high-precision DEMs of Jeju-Island was generated and data fusion algorithm was developed in order to integrate the multi-spectral optic and polarimetric SAR image. Three dimensional land-cover and two dimensional soil moisture maps were generated conclusively so as to investigate the Earth's surface environments and extract the geophysical parameters.

• 에너지공학
• /
• 제28권4호
• /
• pp.13-18
• /
• 2019

The high energy penalty in amine-based post-combustion CO₂ capture process is hampering its industrial scale application. An advanced process is designed by intensive heat integration within the conventional process to reduce the stripper duty. The study presents the technical feasibility for stripper duty reduction by intensive heat integration in CO₂ capture process. A rigorous rate-based model has been used in Aspen Plus® to simulate conventional and advanced process for a 300 MW coal-based power plant. Several design and operational parameters like split ratio, stripper inter-heater location and flowrate were studied to find the optimum values. The results show that advanced configuration with heat integration can reduces the stripper heat by 14%.

• ETRI Journal
• /
• 제38권4호
• /
• pp.767-775
• /
• 2016

Automatic container code recognition from a captured image is used for tracking and monitoring containers, but often fails when the code is not captured clearly. In this paper, we increase the accuracy of container code recognition using multiple views. A character-level integration method combines recognized codes from different single views to generate a new code. A decision-level integration selects the most probable results from the codes from single views and the new integrated code. The experiment confirmed that the proposed integration works successfully. The recognition from single views achieved an accuracy of around 70% for the test images collected on a working pier, whereas the proposed integration method showed an accuracy of 96%.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.40-47
• /
• 2019

본 논문은 무인항공기 체계(UAS; unmanned aerial system)의 비행체 탑재장비 및 지상에서 운용하는 장비의 연동 검증을 위한 체계통합실험실(SIL; system integration laboratory) 및 체계통합시험(SIT; system integration test)의 환경 구축 및 이를 통한 검증방법에 대하여 다룬다. SIL 내 구축된 지상통제체계, 데이터링크체계, 비행체 탑재장비, 임무장비(EO/IR, SAR) 등과 같은 부체계간의 인터페이스 환경 및 모의 비행을 통한 체계 운용로직의 검증방법과 실험실 레벨에서의 검증이 완료된 각 부체계를 실제 시험 환경에서 검증하는 방법에 대해 기술한다.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.133-143
• /
• 2023

본 논문에서는 유무인 협업을 위한 유인회전익기에 의한 다수 무인기 운용통제기술의 요구도 검증을 위한 통합검증환경의 요구도 분석, 구현 및 검증에 대해 기술하였다. 통합검증환경은 유인회전익기 비행 모의, 무인항공기 비행 및 임무장비 모의, 무인항공기 제어 및 유인회전익기와의 통제권 변경을 위한 지상통제장비 모의, 유인회전익기 및 무인항공기 임무계획 작성 및 전송을 위한 운용통제장비 모의로 구성된다. 각각 구현된 구성품들은 소프트웨어/하드웨어 통합시험을 통해 요구도를 검증하였다.

• ETRI Journal
• /
• 제34권5호
• /
• pp.706-712
• /
• 2012

In previous work, novel maskless bumping and no-flow underfill technologies for three-dimensional (3D) integrated circuit (IC) integration were developed. The bumping material, solder bump maker (SBM) composed of resin and solder powder, is designed to form low-volume solder bumps on a through silicon via (TSV) chip for the 3D IC integration through the conventional reflow process. To obtain the optimized volume of solder bumps using the SBM, the effect of the volumetric mixing ratio of resin and solder powder is studied in this paper. A no-flow underfill material named "fluxing underfill" is proposed for a simplified stacking process for the 3D IC integration. It can remove the oxide layer on solder bumps like flux and play a role of an underfill after the stacking process. The bumping process and the stacking process using the SBM and the fluxing underfill, respectively, for the TSV chips are carefully designed so that two-tier stacked TSV chips are sucessfully stacked.

• ETRI Journal
• /
• 제29권6호
• /
• pp.811-813
• /
• 2007

We report on a ridge waveguide laser diode with laterally tapered waveguides fabricated in a single growing step using a double patterning method. In this structure, nearly constant output power is obtained with the change of the lower tapered waveguide width, and the facet power ratio of 1.4 to 1.5 is observed over the current range. The asymmetric facet power property is also investigated.

• 대한임상검사과학회지
• /
• 제50권3호
• /
• pp.289-296
• /
• 2018

임상병리학과 학제 단일화에 대한 의견을 교수와 병원근무자들을 대상으로 설문조사 형식으로 조사하여 분석하였다. 2018년 1월 18일부터 25일까지 웹 버전의 설문지가 255명의 대학교수들과 4,000명의 병원근무자들에게 배포되었다. 회수율은 교수들은 79명(30.9%), 병원실무자들은 1,368명(34.2%)이 응답하였다. 임상병리학의 학제 이원화에 대한 인식조사에서는 교수와 병원근무자 모두 4년제로 학제 통합이 필요하다고 조사되었다. 4년제 통합 전제조건은 임상병리 인증평가원 설립과 교육과정의 표준화가 높게 조사되었고, 4년제 통합의 필요조건은 학생정원조정과 교육과정의 표준화가 높게 조사되었다. 4년제 통합방식은 인증평가를 통과한 대학만이 4년제를 운영해야 한다는 의견이 교수와 병원근무자 모두 가장 높게 조사되었다. 4년제 통합시 대학정원 적정인원은 40명 미만이 가장 높게 조사되었다. 결론적으로 교수들과 병원실무자들은 의료환경의 급격한 변화에 부응하는 전문성을 가진 임상병리사를 배출하기 위해서는 임상병리학과 학제의 4년제 통합이 필수적이고, 이를 위해 임상병리인증평가원 설립, 교육과정의 표준화, 학생정원조정 이 전제되어야 한다고 생각하고 있음을 보여준다.

• Structural Engineering and Mechanics
• /
• 제43권1호
• /
• pp.1-13
• /
• 2012

A fast precise integration method (FPIM) is proposed for solving structural dynamics problems. It is based on the original precise integration method (PIM) that utilizes the sparse nature of the system matrices and especially the physical features found in structural dynamics problems. A physical interpretation of the matrix exponential is given, which leads to an efficient algorithm for both its evaluation and subsequently the solution of large-scale structural dynamics problems. The proposed algorithm is accurate, efficient and requires less computer storage than previous techniques.