• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.15-23
• /
• 2021

In most hacking attacks, hackers intrudes inside for a long period of time and attempts to communicate with the outside using a circumvent connection to achieve purpose. research in response to advanced and intelligent cyber threats has been mainly conducted with signature-based detection and blocking methods, but recently it has been extended to threat hunting methods. attacks from organized hacking groups are advanced persistent attacks over a long period of time, and bypass remote attacks account for the majority. however, even in the intrusion detection system using intelligent recognition technology, it only shows detection performance of the existing intrusion status. therefore, countermeasures against targeted bypass rwjqthrwkemote attacks still have limitations with existing detection methods and threat hunting methods. in this paper, to overcome theses limitations, we propose a model that can detect the targeted circumvent connection remote attack threat of an organized hacking group. this model designed a threat hunting process model that applied the method of verifying the origin IP of the remote circumvent connection, and verified the effectiveness by implementing the proposed method in actual defense information system environment.

• Health Policy and Management
• /
• v.33 no.3
• /
• pp.295-310
• /
• 2023

Background: The long-term care (LTC) group has higher rates of chronic disease and disability registration compared to the general older people population. There is a need to provide integrated medical services and care for LTC group. Consequently, this study aimed to identify medical usage patterns based on the ratings of LTC and the characteristics of benefits usage in the LTC group. Methods: This study employed the National Health Insurance Service Database to analyze the effects of demographic and LTC-related characteristics on medical usage from 2015 to 2019 using a repeated measures analysis. A longitudinal logit model was applied to binary data, while a linear mixed model was utilized for continuous data. Results: In the case of LTC ratings, a positive correlation was observed with overall medical usage. In terms of LTC benefit usage characteristics, a higher overall level of medical usage was found in the group using home care benefits. Detailed analysis by medical institution classification revealed a maintained correlation between care ratings and the volume of medical usage. However, medical usage by classification varied based on the characteristics of LTC benefit usage. Conclusion: This study identified a complex interaction between LTC characteristics and medical usage. Predicting the requisite medical services based on the LTC rating presented a challenge. Consequently, it becomes essential for the LTC group to continuously monitor medical and care needs, even after admission into the LTC system. To facilitate this, it is crucial to devise an LTC rating system that accurately reflects medical needs and to broaden the implementation of integrated medical-care policies.

• Korea Trade Review
• /
• v.48 no.2
• /
• pp.27-43
• /
• 2023

The maritime industry is playing an increasingly vital part in global economic expansion. Specifically, the Baltic Dry Index is highly correlated with global commodity prices. Hence, the importance of BDI prediction research increases. But, since the global situation has become more volatile, it has become methodologically more difficult to predict the BDI accurately. This paper proposes an integrated machine-learning strategy for accurately forecasting BDI trends. This study combines the benefits of a convolutional neural network (CNN) and long short-term memory neural network (LSTM) for research on prediction. We collected daily BDI data for over 27 years for model fitting. The research findings indicate that CNN successfully extracts BDI data features. On this basis, LSTM predicts BDI accurately. Model R2 attains 94.7 percent. Our research offers a novel, machine-learning-integrated approach to the field of shipping economic indicators research. In addition, this study provides a foundation for risk management decision-making in the fields of shipping institutions and financial investment.

• Archives of design research
• /
• v.13 no.1
• /
• pp.139-148
• /
• 2000

Development of the digital technology made possible the Integrated media that is combined computer with information network technology. Integrated media is the data transferring method through the multimedia, and has been developed by the similar form with the human's information transferring system. For that reason, interface has been developed as the important theme, Human Computer Interaction, according to the formal development. Using interface is not activated yet for the lack of connection with various divisions and the system of the product development although interfaces formatic development is re-arranged and re-established in design. This is the try to construct new model of the interface by re-arrange of the factors for the information transferring form development on the ground of the mp3 service vending machine development. Interface is divided into logical I formatic and hardware I software for he systematic classification and also arranged so that anybody can understand. Consequently, presenting of the new integrated interface paradigm can make possible to suggest the fundamental framework that is the new direction of the design re-arranged by the integrated media.

• Nano
• /
• v.13 no.11
• /
• pp.1850126.1-1850126.10
• /
• 2018

Flexible strain sensors, as the core member of the family of smart electronic devices, along with reasonable sensing range and sensitivity plus low cost, have rose a huge consumer market and also immense interests in fundamental studies and technological applications, especially in the field of biomimetic robots movement detection and human health condition monitoring. In this paper, we propose a new flexible strain sensor based on thick CVD graphene film and its low-cost fabrication strategy by using the commercial adhesive tape as flexible substrate. The tensile tests in a strain range of ~30% were implemented, and a gage factor of 30 was achieved under high strain condition. The optical microscopic observation with different strains showed the evolution of cracks in graphene film. Together with commonly used platelet overlap theory and percolation network theory for sensor resistance modeling, we established an overlap destructive resistance model to analyze the sensing mechanism of our devices, which fitted the experimental data very well. The finding of difference of fitting parameters in small and large strain ranges revealed the multiple stage feature of graphene crack evolution. The resistance fallback phenomenon due to the viscoelasticity of flexible substrate was analyzed. Our flexible strain sensor with low cost and simple fabrication process exhibits great potential for commercial applications.

• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.30-39
• /
• 1992

In this study, an integrated boration and dilution (INBAD) model is proposed to predict the required makeup flowrate for RCS boron concentration change and to analyze the boron concentration behavior at each subsystem within the RCS including CVCS during boration and dilution operation. The INBAD model is constructed by integrating an existing neutronic code and a boration and dilution model. The boration and dilution model has been developed for our specific purpose using the one-cell model and multi-cell model. In addition, in order to assess the boron concentration behavior more realistically, two important features such as variable pressurizer heater output and optional makeup mode (either direct or indirect injection) are implemented in this model. In order to demonstrate the usefulness of this model, the boron concentration behavior analysis at each subsystem were performed for both direct and indirect injection mode using YGN 3 and 4 design data. Also, the effect of pressurizer heater output on the primary loop boron concentration was investigated. The results showed that the boron concentration changes can be predicted accurately at each subsystem during boration and dilution operation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.4
• /
• pp.135-144
• /
• 2010

Privacy protection can only be achieved by enforcing privacy policies within an enterprise's on and offline data processing systems. There are P-RBAC model and purpose based model and obligations model among privacy policy models. But only these models each can not dynamically deal with the rapidly changing business environment. Even though users are in the same role, on occasion, secure system has to opt for a figure among them who is smart, capable and supremely confident and to give him/her a special mission during a given period and to strengthen privacy protection by permitting to present fluently access control conditions. For this, we propose Integrated Privacy Protection Model based on RBAC. Our model includes purpose model and P-RBAC and obligation model. And lastly, we define high level policy language model based XML to be independent of platforms and applications.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.6
• /
• pp.124-136
• /
• 2002

A freshwater lake water quality management system(FLAQUM) was developed to help regional manager for the water quality of a rural basin. The integrated user interface system FLAQUM written in Visual Basic, includes three subsystems such as a database management system, basin pollutant loads simulation model using SWMM model and freshwater lake water quality simulation model using WASP5 model. Pollutant load simulation model was applied to simulate the discharge and pollutant loading from the watershed, and freshwater lake water quality model was applied to analyze the changes in water quality with respect to watershed pollutant loads, and this model could be used in planning to control watershed pollutant source for water quality management. Database management system was constructed fur all input and output data processing, and it can be used to analyze statistical characteristics using constructed data. Results are displayed both graph and text for convenience of user. The results of FLAQUM application to Boryeong freshwater lake showed that the lake was in eutrophic condition. The major contribution of pollution comes from tributary No.1 and No.4, which have a large number of livestock farms. Therefore, water quality management must be focused on appropriate management of the livestock farming in the two breanchs.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.73-83
• /
• 2014

The government has recently carried out monitoring to attain a better understanding of the current situation and model for prediction of future events pertaining to water quality in the estuarine area of Yeongsan River. But many users have noted difficulties to understand and utilize the results because most monitoring and model data consist of figures and text. The aim of this study is to develop a GIS-based integrated information system to support the understanding of the current situation and prediction of future events about water quality in the estuarine area of Yeongsan River. To achieve this, a monitoring DB is assembled, a linkages model is defined, a GUI is composed, and the system development environment and system composition are defined. The monitoring data consisted of observation data from 2010 ~ 2012 in the estuarine area of Yeongsan River. The models used in the study are HSPF (Hydrological Simulation Program-Fortran) for simulation of the basin and EFDC (Environmental Fluid Dynamics Code) for simulation of the estuary and river. Ultimately, a GIS based system was presented for utilization and expression using monitoring and model data. The system supports prediction of the estuarine area ecological environment quantitatively and displays document type model simulation results in a map-based environment to enhance the user's spatial understanding. In future study, the system will be updated to include a decision making support system that is capable of handling estuary environment issues and support environmental assessment and development of related policies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1283-1287
• /
• 2003

Reverse engineering technology refers to the process that creates a CAD model of an existing part using measuring devices. Recently, non-contact scanning devices have become more accurate and the speed of data acquisition has increased drastically. However, they generate thousands of points per second and various types of point data. Therefore. it becomes a important to handle the huge amount and various types of point data to generate a surface model efficiently. This paper proposes a new triangular mesh generation method using 3D grids. The geometric information of a part can be obtained from point cloud data by estimating normal values of the points. In our research, the non-uniform 3D grids are generated first for feature based data reduction based on the geometric information. Then, triangulation is performed with the reduced point data. The grid structure is efficiently used not only for neighbor point search that can speed up the mesh generation process but also for getting surface connectivity information to result in same topology surface with the point data. Through this integrated approach, it is possible to create surface models from scanned point data efficiently.