• Earthquakes and Structures
• /
• v.22 no.2
• /
• pp.185-201
• /
• 2022

Structural Health Monitoring (SHM) is used to provide reliable information about the structure's integrity in near realtime following extreme incidents such as earthquakes, considering the inevitable aging and degradation that occurs in operating environments. This paper experimentally investigates an integrated wireless sensor network (Wi-SN) based monitoring technique for damage detection in concrete structures. An effective SHM technique can be used to detect potential structural damage based on post-earthquake data. Two novel methods are proposed for damage detection in reinforced concrete (RC) building structures including: (i) Jerk Energy Method (JEM), which is based on time-domain analysis, and (ii) Modal Contributing Parameter (MCP), which is based on frequency-domain analysis. Wireless accelerometer sensors are installed at each story level to monitor the dynamic responses from the building structure. Prior knowledge of the initial state (immediately after construction) of the structure is not required in these methods. Proposed methods only use responses recorded during ambient vibration state (i.e., operational state) to estimate the damage index. Herein, the experimental studies serve as an illustration of the procedures. In particular, (i) a 3-story shear-type steel frame model is analyzed for several damage scenarios and (ii) 2-story RC scaled down (at 1/6th) building models, simulated and verified under experimental tests on a shaking table. As a result, in addition to the usual benefits like system adaptability, and cost-effectiveness, the proposed sensing system does not require a cluster of sensors. The spatial information in the real-time recorded data is used in global damage identification stage of SHM. Whereas in next stage of SHM, the damage is detected at the story level. Experimental results also show the efficiency and superior performance of the proposed measuring techniques.

• Smart Structures and Systems
• /
• v.29 no.1
• /
• pp.251-266
• /
• 2022

Structural Health Monitoring (SHM) of critical infrastructure comprises a major pillar of maintenance management, shielding public safety and economic sustainability. Although SHM is usually associated with data-driven metrics and thresholds, expert judgement is essential, especially in cases where erroneous predictions can bear casualties or substantial economic loss. Considering that visual inspections are time consuming and potentially subjective, artificial-intelligence tools may be leveraged in order to minimize the inspection effort and provide objective outcomes. In this context, timely detection of sensor malfunctioning is crucial in preventing inaccurate assessment and false alarms. The present work introduces a sensor-fault detection and interpretation framework, based on the well-established support-vector machine scheme for anomaly detection, combined with a coalitional game-theory approach. The proposed framework is implemented in two datasets, provided along the 1st International Project Competition for Structural Health Monitoring (IPC-SHM 2020), comprising acceleration and cable-load measurements from two real cable-stayed bridges. The results demonstrate good predictive performance and highlight the potential for seamless adaption of the algorithm to intrinsically different data domains. For the first time, the term "decision trajectories", originating from the field of cognitive sciences, is introduced and applied in the context of SHM. This provides an intuitive and comprehensive illustration of the impact of individual features, along with an elaboration on feature dependencies that drive individual model predictions. Overall, the proposed framework provides an easy-to-train, application-agnostic and interpretable anomaly detector, which can be integrated into the preprocessing part of various SHM and condition-monitoring applications, offering a first screening of the sensor health prior to further analysis.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.117-126
• /
• 2001

We have developed the Mobile Multi Sensor System(MMSS) for the data construction of 4S application and for basic technology acquisition of mobile mapping system in Korea. Using this MMSS, we will collect the information of road and road facilities for DB creation and also construct the Digital Elevation Model(DEM) as ancillary data in urban area. The MMSS consist of the integrated navigation sensor, DGPS & IMU, and digital CCD camera set. In the S/W aspect, we developed the post-processing components for extracting the 3D coordinate information (Spatial Information) and the client program for the MMSS user group. In this paper, we will overview the MMSS constitution and post-processing program, and introduce the utilization plan of MMSS.

• Knowledge Management Research
• /
• v.24 no.1
• /
• pp.195-221
• /
• 2023

As the global energy and climate crisis has complicated interests of each country, the agenda that requires a global response has recently been revived. In particular, Korea is highly dependent on energy imports and continues to have high energy consumption, low efficiency of energy consumption, and high greenhouse gas emissions, so innovative and effective energy policies are urgently needed to achieve energy efficiency and carbon neutrality. In this study, among the changes in distributed district energy policy after the integrated energy method was introduced in Korea in the mid-1980's, the case of the "National Heat Map Project" policy implementation is analyzed with a modified multi-flow model. The 10 years of the Lee Myung-bak and Park Geun-hye administrations, the period of study, was a period in which the main paradigm of energy policy shifted to a "distributed energy platform" and policy transitions such as policy agenda setting, policy drift, and policy revision were made. A study on the process would be meaningful.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.5
• /
• pp.387-393
• /
• 2023

Objectives: This study was attempted in order to understand about the satisfaction with major and the dental hygiene professionalism in dental hygiene students and to grasp the factors affecting the career preparation behavior. Methods: The research subjects included 264 juniors and seniors who are attending dental hygiene department across Korea (three locations in Gyeonggi province, one locations in Daejeon, four locations in Jeolla province, and one locations in Daegu). Data were collected using the online questionnaire between March 6 to April 7, 2023. The chosen data analysis method included descriptive statistical analysis, t-test, one-way ANOVA, Pearson's correlation coefficient, and stepwise multiple linear regression. Results: The following average scores were obtained from those surveyed: 3.25 points concerning career preparation behavior, 3.83 points concerning the respondent's satisfaction with their major, and 3.45 points concerning dental hygiene professionalism. As for a difference in career preparation behavior according to general characteristics, a meaningful difference was shown in terms of gender, motivation for entering the field, and first desired employment. Aspects of career preparation behavior, satisfaction with one's major, and dental hygiene professionalism showed a significant correlation and were confirmed to explain the prediction of 29.1% of the variation in the regression model. Conclusions: For the sake of having an integrated understanding about career preparation behavior among dental hygiene students, there is a need to conduct repeated research on diverse variables and to inquire into a causal relationships between such variables.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.1-6
• /
• 2023

In the realm of dental prosthesis fabrication, obtaining accurate impressions has historically been a challenging and inefficient process, often hindered by hygiene concerns and patient discomfort. Addressing these limitations, Company D recently introduced a cutting-edge solution by harnessing the potential of intraoral scan images to create 3D dental models. However, the complexity of these scan images, encompassing not only teeth and gums but also the palate, tongue, and other structures, posed a new set of challenges. In response, we propose a sophisticated real-time image segmentation algorithm that selectively extracts pertinent data, specifically focusing on teeth and gums, from oral scan images obtained through Company D's oral scanner for 3D model generation. A key challenge we tackled was the detection of the intricate molar regions, common in dental imaging, which we effectively addressed through intelligent data augmentation for enhanced training. By placing significant emphasis on both accuracy and speed, critical factors for real-time intraoral scanning, our proposed algorithm demonstrated exceptional performance, boasting an impressive accuracy rate of 0.91 and an unrivaled FPS of 92.4. Compared to existing algorithms, our solution exhibited superior outcomes when integrated into Company D's oral scanner. This algorithm is scheduled for deployment and commercialization within Company D's intraoral scanner.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.259-265
• /
• 2024

This paper analyzed the relationship between human resource development intent, human resource development implementation, firm's competitiveness. In addition, the indirect effect of organizational commitment was also assumed. The data for the research were integrated at the company level(500 companies) and used the data of 9,516 employees collected in the 2nd survey of "the Human Capital Company Panel II" of the "Korea Research Institute for Vocational Education and Training". The structural equation modeling was useed to analyze the analysing model. According to the analysis results, HRD intent had a positively significant effect on firm's competitiveness. And HRD implementation had a positively significant effect on firm's competitiveness. From the indirect effect through bootstrapping analysis, the organizational commitment showed indirect effects from HRD intent and HRD complementation to firm's competitiveness.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.653-658
• /
• 2023

In systems like the combat management system of a naval ship or smart city of civilians, where many sensors and actuators are connected, the middle-ware DDS (Data Distribution Service) is mainly used to transmit large amounts of data. It is scalable and can effectively respond to the increase in sensors or equipment connected to the system in the future. The engineering control system (ECS), which plays an important role similar to the combat management system of a naval ship, still uses Server-Client model with industrial protocols such as Modbus and CAN (Controller Area Network) bus, to transmit data, which is unfavorable in terms of scalability. However, as automation and unmanned systems advance, more sensors and actuators are expected to be added, necessitating substantial program modification. DDS can effectively address such situations. The purpose of this study is to confirm the development possibility of an integrated monitoring and control system of a ship by using OpenDDS, which follows the OMG (Object Management Group) standard among the middle-ware DDS used in the combat management system. To achieve this goal, field equipment simulators and an ECS server were configured to perform field equipment data input/output and simulation using DDS was performed. The ECS prototype successfully handled data transmission, confirming that DDS is capable of serving as the middle-ware for the ECS of a ship.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.2
• /
• pp.1-10
• /
• 2000

The purpose of this study is to develope a parcel-based automatic simulation system of land price through the integration of urban mathematical model and GIS. The appraisal process of public land price by the local government is simple but is a great time-consuming task. Moreover, it doesn't provide any statistical analysis and spatial presentation tools. So, it is difficult for planners or administrative officials to analyze the variation of land price with spatial idea. From these, a system is developed combining two sub-systems, they are ANN(Artificial Neural Network) for the calculation of land price and GIS for visual presentation. Using Matlab application, ANN model was designed having 3-layer structure and was trained with the sample data taken from Chinju city. With the trained network, the impact of 'road', 'parks', 'height control district' and 'beauty district' on land price in 9 regions(dong) are simulated. The results of the simulation were visualized with ArcView GIS. The automatic simulation system operated through the DDE(Dynamic Data Exchange) conversation between two applications. ArcView was set as client and Matlab as server. Scripting in ArcView and customizing a window of ArcView, this system can execute the whole process of simulation by just clicking a button with mouse. As a conclusion, this system was proved to be an effective and easily controllable planning support system for the land price simulation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.4
• /
• pp.705-717
• /
• 2020

Cities in the world are rushing to develop smart cities to create a sustainable and happy city by solving many problems in cities using information and communication technologies such as big data and IoT. However, in Korea's smart cities and smart city certification systems, the focus is on platform-oriented hardware infrastructure, and the information security aspect is first considered to build and authenticate. It is a situation in which a response system for the risk of leakage of big data containing personal information is needed through policy research on the aspect of personal information protection for smart city operation. This paper analyzes the types of personal information in smart cities, problems associated with the construction and operation of smart cities, and the limitations of the current smart city law and personal information protection management system. As a solution, I would like to present a model of a personal information protection management system in the smart city field and propose a plan to strengthen personal information protection through this. Since the management system model of this paper is applied and operated in the national smart city pilot cities, demonstration cities, and CCTV integrated control centers, it is expected that citizens' personal information can be safely managed.