• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.63-68
• /
• 2018

In this paper, We intended to design various things for the realization of SoS(System on Substrate) with SIW in 24GHz ISM 밴드(24-24.25GHz). As part of them, We integrated SIW, transition and MPAA as SoS on the same substrate and investigated its characteristics. We used Rogers Ro4350 with relative permittivity of 3.48 and thickness of 20mil. As results of optimal design, insertion loss of the SIW with 11.55mm length showed 0.32dB and insertion loss of 0.19dB occurred in transition to $50{\Omega}$ microstrip. Characteristics of the MPAA integrated on the same substrate as SoS are very similar to those of stand-alone MPAA. But the integrated MPAA decreased by 0.58dB in gain, which is the sum of SIW insertion loss and transition insertion loss, and by 0.7dB in SLL compared that of stand-alone MPAA. However, the bandwidth was increased by 19.4% as it changed from 670MHz to 800Mhz.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.705-705
• /
• 2006

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.872-879
• /
• 2004

The TX/RX broadband L-type circular polarization antenna using LTCC(Low Temperature Co-fired Ceramic) for satellite communication at K, Ka band(20～21 GHz/30～31 GHz) has been presented. This antenna has been analyzed in compensation for LTCC with relative permittivity 5.2 and could have been integrated with RF component. Also antennas on LTCC enable :o reduce loss of RF system due to integrate with RF circuits and to light weight, and thus, generally one can reduce size of the RF system. As the geometry of this antenna presented is made simple by L type of monopole antenna, it is easily manufactured by LTCC progress and enables to reduce loss.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.6
• /
• pp.505-508
• /
• 2017

This paper analyzes the effect of metal dummy structures in CMOS on antenna performances of a sub-terahertz on-chip microstrip patch antenna. A 400-GHz on-chip antenna is designed in a 45-nm CMOS process, and the resonance frequency and efficiency of the antenna are analyzed depending on the density of metal dummy structures. Antennas integrated with an oscillator are designed and fabricated for verification, and measurements are performed using quasi-optical methods with an FTIR and bolometer. The measurement results shows that the radiated power drops from 420 nW to 90 nW by 6.8 dB due to the dummy structures with the density of 27 %.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.44-51
• /
• 2006

In this paper, the resonance characteristics of zigzag wire dipole antennas are first analyzed by the method of moment(MOM) for shortening the space occupation length of straight wire dipole antenna Considering the shortening effect the integrated zigzag dipole antennas with the simplified microstrip feed are designed. Since the integration gives rise to discontinuities due to antenna line width with abrupt bend angles, the compensation by the chamfer is applied. Futhermore the integrated parasitic zigzag lines are properly attached to both sides of substrate for compensation of the effect of the dielectric substrate, hence improving the resonance characteristic. The design results at UHF and ISM band are verified with experiments.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.329-334
• /
• 2005

In this paper, the characteristics of linealy bent wire antennas are first analyzed for shortening straight wire antennas. The results are appropriately applied to the design of the integrated zigzag dipole antenna. Since the integration give rise to discontinuities due to line width, the integrated parasitics are properly attached to both sides of substrate for improving the antenna gain and return loss. The design results are verified with experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.286-291
• /
• 2013

In this paper, a compact rectenna system is designed using a circular sector antenna with harmonic-rejecting characteristics and a direct impedance matching method. The system is designed with bandpass filtering performed by the harmonic-rejection of the circular sector antenna and without impedance matching circuit for the diodes by the direct impedance matching technique. Therefore, while the rectifying circuit of the proposed system can be implemented without a bandpass filter and a impedance matching circuit, it is integrated on the back side of the antenna using precise fabrication techniques for coaxial feedings without degrading the system performances corresponding to the feeding points. From the experimental results, the optimized rectenna system has presented excellent performances of a conversion efficiency of more than 52 % and a conversion voltages of more than 1.5 V at 2.5 GHz.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.459-470
• /
• 2008

DATS which is one of three subsystems of IDACS is responsible to receive Sensor Data, LRIT and HRIT in L-Band and transmit LRIT and HRIT in S-Band from/to COMS satellite. This paper shows detailed test procedures used to verify the performance and functionality of DATS after its implementation was completely finished. As a part of efforts to verify key DATS performance, G/T and EIRP were measured by using solar flux density as radio source. Regarding the verification of DATS functionality, RF loop-back test was conducted to validate if there is no BER degradation excepting MODEM/BB implementation loss occurred in the integrated DATS. Integrated with 13m antenna, DATS successfully restored image from received MTSAT-1R broadcasting data, LRIT and HRIT, of which frequencies are all L-Band. S-Band transmission was also verified through test antenna placed away from 13m antenna by measuring real LRIT and HRIT spectrum in S-Band. From those test results, DATS is determined to be fully ready to communicate with COMS in L-Band and S-Band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1797-1804
• /
• 2011

In this paper, I analyzed array organization of MIMO channel antenna and effect of operation environment by evaluating average BER from linear Space-Time Block Code orthogonal design and suggests designing condition of MT antenna for improved BER and the fading index m. To analyze system performance, I used M-PSK and M-QAM modulation, and to use analysis equations I used integrated by Nakagami fading variable, non-integrated Nakagami fading variable. We can get the organization of channel array by using mathematical calculation on matrix. STBE BER performance will decrease as AOA spreading decrease and such loss can be compensated from extending antenna spacing, and changing array organization.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.149-155
• /
• 2023

In urban areas it can be difficult to utilize global navigation satellite systems (GNSS) due to signal reflections and blockages. It is thus crucial to detect reflected or blocked signals because they lead to significant degradation of GNSS positioning accuracy. In a previous study, a classifier for global positioning system (GPS) signal reception conditions was developed using three features and the support vector machine (SVM) algorithm. However, this classifier had limitations in its classification performance. Therefore, in this study, we developed an improved machine learning based method of classifying GPS signal reception conditions by including an additional feature with the existing features. Furthermore, we applied various machine learning classification algorithms. As a result, when tested with datasets collected in different environments than the training environment, the classification accuracy improved by nine percentage points compared to the existing method, reaching up to 58%.