Browse > Article
http://dx.doi.org/10.5515/KJKIEES.2017.28.6.505

Sub-Terahertz On-Chip Microstrip Patch Antenna in CMOS with Metal Dummy Structures  

Shim, Dongha (MSDE Programme, SeoulTech)
Yang, Ji Hoon (Department of Manufacturing Systems and Design Engineering, SeoulTech)
Han, Seung Han (Department of Manufacturing Systems and Design Engineering, SeoulTech)
Lee, Hyounmin (Department of Manufacturing Systems and Design Engineering, SeoulTech)
Kim, Ki Hoon (MSDE Programme, SeoulTech)
Kim, Hokyung (MSDE Programme, SeoulTech)
Publication Information
Abstract
This paper analyzes the effect of metal dummy structures in CMOS on antenna performances of a sub-terahertz on-chip microstrip patch antenna. A 400-GHz on-chip antenna is designed in a 45-nm CMOS process, and the resonance frequency and efficiency of the antenna are analyzed depending on the density of metal dummy structures. Antennas integrated with an oscillator are designed and fabricated for verification, and measurements are performed using quasi-optical methods with an FTIR and bolometer. The measurement results shows that the radiated power drops from 420 nW to 90 nW by 6.8 dB due to the dummy structures with the density of 27 %.
Keywords
Sub-Terahertz; On-Chip Microstrip Patch Antenna; Metal Dummy Structures; CMOS;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S. Kang, S. V. Thyagarajan, and Ali M. Niknejad, "A 240 GHz wideband QPSK transmitter in 65 nm CMOS", in IEEE RFIC Symp., pp. 353-356, Jun. 2014.
2 H. Xie, L. Belostotski, and M. Okoniewski, "A 460-GHz CMOS substrate-integrated-waveguide slot-antenna design", Micro. Opt. Tech. Lett., vol. 58, no. 2, pp. 347-351, Feb. 2016.   DOI
3 W. Steyaert, P. Reynaert, "A 0.54 THz signal generator in 40 nm bulk CMOS With 22 GHz tuning range and integrated planar antenna", IEEE J. Solid-State Circuits, vol. 49, no. 7, pp. 1617-1626, Jul. 2014.   DOI
4 E. Seok et al., "A 410-GHz CMOS push-push oscillator with a patch antenna", in IEEE ISSCC Dig. Tech. Papers, pp. 472-473, Feb. 2008.
5 B. E. Stine et al., "The physical and electrical effects of metal-fill patterning practices for oxide chemical-mechanical polishing processes", IEEE Trans. Elec. Dev., vol. 45, no. 3, Mar. 1998.
6 A. Tsuchiya, H. Onodera, "Dummy fill insertion considering the effect on high-frequency characteristics of spiral inductors", in IEEE MTT-S Int. Microw. Symp. Dig., pp. 787-790, Jun. 2008.
7 S. Amakawa, et al., "Design of well-behavied low-loss millimetre-wave CMOS transmission lines", Workshop on Signal and Power Integrity, May 2014.
8 D. J. Arenas, et al., "Characterization of near-terahertz complementary metal-oxide semiconductor circuits using a Fourier-transform interferometer", Review of Scientific Instruments, vol. 82, no. 10, 103106-1-103106-6, Oct. 2011.   DOI
9 D. M. Pozar, "Microstrip antennas", Proc. IEEE, vol. 80, no. 1, Jan. 1992.
10 K. V. Caekenberghe et al., "A 2-40 GHz probe station based setup for on-wafer antenna measurements", IEEE Trans. Ant. Prop., vol. 56, no. 10, pp. 3241-3247, Oct. 2008.   DOI