• Progress in Medical Physics
• /
• v.3 no.2
• /
• pp.67-81
• /
• 1992

Lots of physical phenomena which deteriorate the faithfulness of radiological images exist. The most common types of degradation are a loss of resolution and an increase in noise. This article deals with resolution. factors that influence it. and its characterisation. The problem of resolution failure due to a generic blurring phenomenum is described diagramatically and mathematically. for both one dimensional and two dimensional signals. The definition of the point spread function. the line spread function. the convolution integral and the modulation transfer function are made. The concept of frequency domain operations using the Fourier Transform is also discussed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.5-5
• /
• 1998

가스터빈 엔진은 민간 항공분야와 방위 무기의 발달과 더불어 성능이 향상되어 왔고, 그 역할도 증대하였다. 성능 향상과 역할 증대에 따라 처리하여야 할 일의 양과 그 속도가 증가하게 되면서 엔진 제어 난이도도 증가하고 제어기법도 향상되고 있다. 이에, 전자공학의 발달에 힘입어 전자식 엔진 제어기가 엔진제어의 임무를 수행하게 되었고, 근래에는 기체의 무게감소와 신뢰성 향상이라는 이중 이익을 위해 FADEC(Full Authority Digital Engine Controller)엔진 제어기까지 등장, 사용되고 있다. 가스터빈 엔진의 제어는 일반적으로 비선형 시스템에 관한 모델링 단계와 성능 해석결과를 이용한 보상기 설계 및 제어 단계의 3부분으로 크게 분류된다. FADEC이란 개념이 정착되기 이전에는 통상적인 제어 법칙인 PID(Proportional Integral Derivative) 방법이 사용되었으나, 시스템의 복잡화와 다변화에 의하여 modern control 개념이 고려된 새로운 제어 방법이 사용되기 시작하였다. 본 논문에서는 엔진 제어에 실제적으로 이용할 수 있는 제안된 제어 법칙을 이용하여 실제 엔진 모델에 적용하여 시뮬레이션 함으로써 새로운 제어 법칙이 엔진 제어에 적용 가능함을 보이고자 한다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.185-191
• /
• 2003

A numerical study on the hydrodynamic properties of a floating flexible breakwater consisting of triple vertical porous membrane structures attached to a floating rigid pontoon restrained by moorings is carried out in the context of two-dimensional linear wave-flexible body interaction theory. The tensions in the triple membranes are achieved by hanging a clump weight from its lower ends. The clump weight is also restrained properly by moorings. The dynamic behavior of the breakwater was described through an appropriate Green function, and the fluid multi-domains are incorporated into the boundary integral equation. Numerical results are presented which illustrate the effects of the various wave and structural parameters on the efficiency of the breakwater as a barrier to wave action. It is found that the wave reflection and transmission properties of the structures depends strongly on the membrane length taking major fraction of water column, the magnitude of tensions on membrane achieving by the clump weight, proper mooring types and stiffness, the permeability on the membrane dissipating wave energy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.75-82
• /
• 2002

In this paper, the robust PID(Proportional-Integral-Derivative) controller was designed for speed control of BLDC motors using the frequency region model matching method. It was designed the robust PID controller satisfying disturbance attenuation and robust tracking performance using an H$\infty$ control method. The robust PID controller gains with the performances of the designed H$\infty$ controller are determined using the model matching method at frequency domain. Consequently, simulation results show that the proposed PID speed controller satisfies load torque disturbance attenuation and robust tracking performance, and this study has usefulness and applicability for the speed control system design of BLDC motors.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.64-72
• /
• 2004

An extension of interaction matrix formulation to the problem of system and disturbance identification for a plant that is corrupted by both process and output disturbances is presented. The teaming control develops controllers that learn to improve their performance at executing a given task, based on experience performing this task. The simplest forms of loaming control are based on the same concept as integral control, but operating in the domain of the repetitions of the task. This paper studies the use of such controllers in a decentralized system, such as a robot moving on the vertical plane with the controller for each link acting independently. The basic result of the paper is to show that stability and iterative precision of the learning controllers for all subsystems when the coupling between subsystems is turned off, assures stability of the decentralized teaming in the coupled system, provided that the sample time in the digital teaming controller is sufficiently short. The methods of teaming system are shown up for the iterative precision of each link.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.322-330
• /
• 1987

Isotropic linear viscoelasticity problems are analyzed numerically in time domain by Boundary Element Method with quadratic isoparametric boundary elements. Viscoelastic fundamental solutions are newly derived by using the elastic-viscoelastic correspondence principle and corresponding boundary integral equations are also presented. Numerical results of two examples are compared with the derived exact solutions to verify the accuracy and validity of the method. A detailed study on the accuracy of displacement and stress in terms of time integration step is given.

• International Journal of High-Rise Buildings
• /
• v.8 no.4
• /
• pp.313-324
• /
• 2019

This paper presents the analysis of wind speeds data measured on top of three neighboring high-rise buildings close to a beach in Xiamen city, China, during Typhoon "Usagi" 2013. Wind tunnel simulation was carried out to validate the field measurement results. Turbulence intensity, turbulence integral scale, power spectrum and cross correlation of recorded wind speed were studied in details. The low frequency trend component of the typhoon speed was also discussed. The field measurement results show turbulence intensity has strong dependence to the wind speed, upwind terrain and even the relative location to the Typhoon center. The low frequency fluctuation could severely affect the characteristics of wind. Cross correlation of the measured wind speeds on different buildings also showed some dependence on the upwind terrain roughness. After typhoon made landfall, the spatial correlation of wind speeds became weak with the coherence attenuating quickly in frequency domain.

• Structural Engineering and Mechanics
• /
• v.22 no.1
• /
• pp.1-16
• /
• 2006

This paper presents a virtual boundary element-equivalent collocation method (VBEM) for the plane magnetoelectroelastic solids, which is based on the fundamental solutions of the plane magnetoelectroelastic solids and the basic idea of the virtual boundary element method for elasticity. Besides all the advantages of the conventional boundary element method (BEM) over domain discretization methods, this method avoids the computation of singular integral on the boundary by introducing the virtual boundary. In the end, several numerical examples are performed to demonstrate the performance of this method, and the results show that they agree well with the exact solutions. So the method is one of the efficient numerical methods used to analyze megnatoelectroelastic solids.

• Structural Engineering and Mechanics
• /
• v.57 no.1
• /
• pp.65-89
• /
• 2016

This paper presents the development of methodologies using Extended Finite Element Method (XFEM) for cracked unstiffened and concentric stiffened panels subjected to constant amplitude tensile fatigue loading. XFEM formulations such as level set representation of crack, element stiffness matrix formulation and numerical integration are presented and implemented in MATLAB software. Stiffeners of the stiffened panels are modelled using truss elements such that nodes of the panel and nodes of the stiffener coincide. Stress Intensity Factor (SIF) is computed from the solutions of XFEM using domain form of interaction integral. Paris's crack growth law is used to compute the number of fatigue cycles up to failure. Numerical investigations are carried out to model the crack growth, estimate the remaining life and generate damage tolerant curves. From the studies, it is observed that (i) there is a considerable increase in fatigue life of stiffened panels compared to unstiffened panels and (ii) as the external applied stress is decreasing number of fatigue life cycles taken by the component is increasing.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.2
• /
• pp.505-514
• /
• 2019

Let R be a commutative ring with identity and M be a unitary R-module. A submodule N of M is called a dense submodule if $Hom_R(M/N,\;E_R(M))=0$, where $E_R(M)$ is the injective hull of M. The R-module M is said to be monoform if any nonzero submodule of M is a dense submodule. In this paper, among the other results, it is shown that any kind of the following module is monoform. (1) The prime R-module M such that for any nonzero submodule N of M, $Ann_R(M/N){\neq}Ann_R(M)$. (2) Strongly prime R-module. (3) Faithful multiplication module over an integral domain.