• 한국항공우주학회지
• /
• 제45권3호
• /
• pp.163-172
• /
• 2017

다공성 단열재는 탁월한 단열 효과로 단열공간을 최소화하여, 기존 단열재 대비 내부 공간을 활용할 수 있어 여러 산업 분야에서 사용되고 있다. 특히 높은 단열 효과뿐만 아니라 경량화가 요구되는 항공우주 산업분야에서는 이와 같은 다공성 단열재의 수요가 증가하고 있다. 본 논문에서는 다공성 단열재의 정확도가 높은 유효 열전도율 예측 모델을 새롭게 제안하고, 기존 예측 모델 및 시험 결과와 비교 검증하였다. 이를 위해, 기존 유효 열전도율 예측 모델에 대하여 문헌조사를 수행하였고, 다공성 단열재의 고체 부피율에 따른 열전도율 시험결과 값과 비교하였다. 또한 유효 열전도율 시험 결과와 비교하여 가장 높은 정확도를 가진 Zehner-Schlunder 모델 및 시험 결과 데이터를 기반으로 새로운 유효 열전도율 예측 모델을 정의하였으며, 시험 결과 데이터와 비교하여 기존 유효 열전도율 예측 모델보다 유사한 정확도를 나타내는 것을 확인하였다. 또한, 개선된 유효 열전도율 예측 모델을 적용하여 초고속 비행체 열방어구조의 과도 열전달 해석을 수행하였으며, 열전달 시험 결과와의 비교를 통해 예측 모델의 유효성을 확인하였다.

• 한국건축시공학회지
• /
• 제16권1호
• /
• pp.9-15
• /
• 2016

건물에서 에너지 손실이 가장 큰 부위는 외피로서, 이 부분의 에너지 손실을 감소하기 위한 연구가 활발히 진행되고 있으나 이는 대부분 창호 및 단열재를 사용한 연구이며 건물 외피의 70% 이상을 차지하고 있는 콘크리트에 대한 연구는 미미한 실정이다. 따라서 건물의 에너지 손실을 최소화하기 위해서는 콘크리트 자체에서 단열성능을 확보할 수 있어야 하며 이에 대한 연구가 필요하다. 이에 본 연구에서는 보통콘크리트보다 열전도율을 2배 이상 개선시킨 구조용 단열성능향상 콘크리트 개발 연구의 일환으로 마이크로기포제, 규조토 미분말, 경량골재를 사용하였으며, 콘크리트 내부공극을 다량확보하여 열전도율을 낮추고자 하였다. 실험결과, 슬럼프와 공기량은 양호한 결과를 나타내었으며, 단위용적질량에서는 마이크로기포제를 사용한 모든 배합에서 보통콘크리트보다 14.3~35.1 % 감소된 결과를 나타내었고 압축강도는 단열성능 향상 재료를 사용하여 다소 감소하는 경향을 나타내었으나 본 실험의 목표 강도(24MPa)를 모두 만족하였다. 또한 열전도율은 보통콘크리트 대비 최대 2배 이상 개선된 결과를 나타내었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.57-58
• /
• 2015

In this study, the experimental study on Thermal Performance of Insulated Forms with Different Insulating Methods at Low Temperature. For this study, placing insulated plywood based form between two constant temperature chamber that maintaining 10℃, decrease temperature of one chamber to -10℃ and -20℃. Each of steps, maintaining period of temperature was 1 hour. After placing the form, measure temperature of opposite side of the insulated form. As a result of experiment, temperature difference of rigid urethane was lowest.

• 한국소음진동공학회논문집
• /
• 제14권7호
• /
• pp.626-631
• /
• 2004

In this study, the extracted words from the former study such as annoying, loud, noisy, irritating, disagreeable, strident, disturbed, and dissonant are given to subjects in psycho acoustic experiment lab. And then, correlation analysis between the words and floor impact noise rating method were carried out. As a result of this study followings are suggested ‘Annoying’ is the word most accurately expressing the subjects’ unpleasant feeling of domestic floor impact noise. The results of this study could be basic materials for psycho acoustic experiments for criteria on floor impact noise and Sound Classification on Floor Impact Sound Insulation Performance.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.123-128
• /
• 2016

Purpose: In order to save the energy consumption of buildings, buildings have been constructed with high performance insulation or airtightness. However, high performance insulation or air tightness has led to a poor indoor air quality. Therefore, HRV(Heat Recovery Ventilator) has received attention to save the energy consumption and insure a good air quality. Because existing research is almost about the performance of HRV in residential buildings, This study analyzed the effect of HRV on cooling energy consumption in commercial office building. Method: This study was proceeded at commercial office building in In-cheon. In order to evaluate the energy consumption of HRV, this study proposed two methods: estimating energy consumption of the room installed AHU(Air Handling Unit) system; estimating energy consumption of the room installed HRV system. Therefore, comparison of two methods was proceeded to evaluate energy performance of each method. Result: As the result of comparison between rooms installed AHU and HRV, the experiment showed that energy consumption of the room installed HRV system is about 22% less than the room of AHU system. This conclusion is considered because the room installed HRV system have maintained temperature well at set point temperature $26^{\circ}C$.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.205-210
• /
• 2009

Generally, the building's windows and ventilation for the purpose of mining and the vista and windows by emotional engineering design area is a growing trend. According to the flow of energy is lost from the building, will be achieved through the walls and roof and windows. Among these, the window through the loss of about 45% of the entire building is big enough to rate. In addition, the building regulation U-value Limitation of window is $3.3W/m^2$ K in southern regions, while U-value Limitation of wall is $0.35{\sim}0.58W/m^2$ K. It means that the energy loss through windows is six times more than it through wall. Therefore, the purpose of this study is to evaluate the environmental performance of the super window system by verification experiment. The results of this study are as follows; 1)Thermal performance of insulated Super Window measured as $1.44W/m^2$ $^{\circ}C$ 2)Required energy for heating was cut down about 5.3% from 266.99 $MJ/m^2$ yr to 252.85 $MJ/m^2$ yr 3)Super Window's reduction rates increased 4.1% from 31.48% to 35.58% when it is compared to normal windows. 4)Building energy efficiency rating elevated from 2nd rating to 1st rating.

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.42-48
• /
• 2020

As global warming accelerates, eco-friendly electric cars are being developed to reduce carbon dioxide emissions, and power conversion inverters are used to drive motors. Among inverter components, DC-link capacitor is heated by high current usage, which causes problems such as performance and life-saving of inverter. Although metal cases with good thermal performance have been used to solve this problem, it is difficult to apply them in practice due to insulation problems with other parts. In this paper, the Heat-Generation influence factor of DC-link capacitor is analyzed. Variables on heat-generation are set at 3 levels for film width, inductance, and film thickness. Box-Behnken to 13 tests using the design and minimal deviations, e.g. through the experiment three times by each level. The surface of the film k type by attaching the sensor current is measured temperature. Capacitance was set to a minimum level of 200 ㎌ and had a frequency of 16 kHz with Worst case, ambient temperature of 85℃ and a ripple current of 50 Ams was applied. The temperature at the measurement point was collected in the data logger after sampling at 1 minute intervals for 2 hours after saturation with the ambient temperature. This experiment confirmed that setup factors are correlated with heat-generation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.149-150
• /
• 2018

Recently, a large fire has occurred through a dry bit, which is a flammable exterior material, in Daebong Green Apartment Fire in Uijeongbu in 2015 and Jecheon Sports Center Fire in 2017. In this study, KS F ISO 5660-1 Cone calorimeter experiment was used to examine the fire risk of dry bit. Also, the performance of the repair and reinforcement materials to prevent fire expansion was examined. As a result, the dry bit is likely to be ignited by internal and external flower gardens, and its combustion rate and calorific value are very high. In addition, the performance of heat resistance such as ALC panel and ceramic board as a repair and reinforcement material has been proved. However, the insulation is expected to require further consideration.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.160-161
• /
• 2022

This study is to investigate the temperature history over time of the cement mortar to confirm the bubble sheet insulation effect using the heat generat sheet. As a result of the experiment, it was confirmed that the heating effect was 6℃ higher on average than other types of sheets when the heating sheet is attached on the bottom of the double layered bubble sheet. For future research, it is planned to verify the heating performance by using the heating sheet under the same environmental conditions as the heating performance will be verified.

• 한국건축시공학회지
• /
• 제15권2호
• /
• pp.177-183
• /
• 2015

본 연구는 구조용 단열콘크리트의 개발을 위한 기초적 연구로서 HMS를 사용한 경량골재콘크리트의 물리, 역학적 특성 및 열전도 특성을 검토한 결과, HMS의 사용으로 인해 슬럼프의 감소가 발생하여 혼화제 사용량의 증가가 필요한 것으로 나타났으며, HMS 치환율의 증가에 따라 압축강도는 HMS의 낮은 계면부착력에 기인하여 감소하는 것으로 나타났다. HMS의 치환에 따라 일반콘크리트 및 경량골재콘크리트 대비 각각 최고 32, 68%의 열전도율 값을 나타내어 열전도율이 크게 개선되는 것으로 나타났다. 또한 물시멘트비의 증가는 압축강도를 감소시켰으나 열전도율은 개선하는 것으로 나타났다.