• 한국항공운항학회지
• /
• 제20권3호
• /
• pp.44-50
• /
• 2012

The noise reduction is important one of considerations in the process of a civil aircraft development program. External noise sources are classified into an air-born source and a structure-born source. Among these noise sources, the most affected noise source into a cabin is the air-born noise source from an engine or propeller. The external noise is transmitted into the cabin through the fuselage structure of airplane which are composed of an fuselage structure, an interior trim panel and an acoustic insulation layer between an fuselage structure and an interior trim panel. Therefore, appropriate fuselage structure and acoustic insulation layer is very important to reduce the internal noise level. In this paper, the vibro-acoustic coupled analysis of the cabin noise of the 80~90 seats regional turboprop aircraft is carried out to validate the acoustic analysis method using Direct BEM and FEM. The sound pressure level onto the fuselage skin is acquired by fan-source noise analysis using BEM, and which sound pressure is used as acoustic noise source in vibro-acoustic noise analysis for cabin noise analysis using FEM.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.384-387
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to moment structures. With like this reason, dry walls we used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-bearing light weight concrete panel using bottom ash, the purpose of this study is to obtain basic data for application in the field. The results are that the structure 1 satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.645-648
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to rahmen structures. With like this reason, dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-bearing light weight concrete panel using bottom ash, the purpose of this study is to obtain basic data for application in the field. The results are as follows. structure 1 satisfy domestic standard concerned with sound insulation between households at the laboratory and field test.

• 설비공학논문집
• /
• 제27권6호
• /
• pp.307-312
• /
• 2015

The sandwich panel is commonly used domestically because it's less costly and easier to handle. But fires have frequently occurred in buildings employing sandwich panels, such as the fires in Eecheon cold storage and in Gwangju Pyungdong industrial zone. Sandwich panels with steel plates on their surface prevent fire water from penetrating to the fire source, which makes it difficult to extinguish a fire in a timely manner. Toxic gas generated from some insulation material leads to serious loss of life and property. This study is intended to develop an extinguishing system for sandwich panels, thereby reducing the fire risk. Fire water and volume were determined in the wake of the study on the structure of a sandwich panel extinguishing system, and improvement and testing of the fire characteristics of the sandwich panel. Based on such study and test, a fire model test was conducted. Consequently, the sandwich panel with extinguishing system was proven to have a reduced fire risk, compared to traditional or fire retardant panels.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.609-616
• /
• 2019

본 논문에서는 재난 재해시 이재민의 주거안전성을 확보하기 위해 단기 임시주거시설에 대한 설계 계획과 목업 제작을 통한 시공성, 주거환경성을 검증하였다. 특히, 재난 재해발생시 이주민이 응급구호시설로 인근 학교의 강당 또는 체육관을 활용하고 있지만 거주성이 확보에 문제가 있다. 이를 극복하기 위한 방안으로 30일 이내 거주하는 단기 임시주택을 제안하는 것이 연구목적이다. 이를 위해 경량이면서 단열이 확보가능한 복합패널을 선정하여 목업을 제작하였다. 복합 패널을 활용한 목업은 약 1시간안에 완성하여, 시공 용이성을 확인하였다. 또한 목업을 통해 실험실에서 결로와 누수실험을 진행하였다. 외부온도 약 $0^{\circ}C$, 실내온도 약 $32^{\circ}C$로 온도에서 결로현상은 발생하지 않았고, 열화상카메라를 통해 확인해보면 단열성능이 확보되는 것으로 판단되었다. 또한 시간당 60 mm의 강우를 모사하여 누수 실험을 진행한 결과 누수가 확인되지 않아 방수성능이 확보되는 것으로 판단된다. 본 연구는 기존 임시주거시설에서 모듈화된 평면, 시제품제작을 통한 시공용이성 확보, 향후 적재의 용이성을 확인하였다. 단열 및 방수성능이 확보되는 것을 확인하였다. 이를 통해 단기 임시주거시설에 대한 대안을 제시하였다.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1931-1936
• /
• 2010

한국형 틸팅열차에는 고속화와 경량화를 위하여 허니콤 복합재가 처음으로 사용된다. 틸팅열차의 측벽은 탄소섬유강화 에폭시층과 접착된 알미늄 허니콤 및 노멕스 허니콤 판재를 주 요소로, 유리면이 적층된 복합 적층재이다. 본 연구에서는 ASTM E2249-02에 근거하여 알미늄 및 노멕스 허니콤 복합 적층재의 층별 인텐시티 투과손실을 측정한다. 질량법칙편차를 이용하여 허니콤 복합재의 중량 대비 차음 성능을 평가하고, 차음 측면에서 알미늄 허니콤 복합재가 기존의 주름강판을 대체할 수 있는지의 가능성을 검토한다. 본 연구를 통하여 얻은 허니콤 복합 적층재의 차음성능 자료는 향후 틸팅 열차의 실내 소음 대책 수립에 활용될 것이다.

• 콘크리트학회논문집
• /
• 제15권3호
• /
• pp.392-399
• /
• 2003

본 연구는 한중콘크리트 시공 시 초기보온 대책 중 가장 손쉽고 경제적일 것으로 사료되는 단열 보온양생을 대상으로 하였다. 실험은 한중콘크리트 시공조건을 상정하여 기존 거푸집과 각종 단열재 조합에 따른 단열거푸집간의 온도이력을 검토하여 효율적인 단열거푸집을 개발하고자 하였다. 실험결과 $-10^{\circ}C$ 일정인 외기온도 조건에서 벽용 거푸집의 경우, 일반 유로폼인 경우는 초기 24시간 이전에 급속한 온도저하에 의해 $0^{\circ}C$ 이하로 약 7시간 정도 지속되었고, PP＋스티로폼＋합판인 경우는 영상의 온도를 유지하고, 강도발현도 우수하며, 단열거푸집간 비교적 가격도 저렴하여 우수한 단열거푸집임이 밝혀졌다. 슬래브용 거푸집 실험의 경우, 하부는 단열거푸집으로 고정하고, 콘크리트 표면 양생방법을 달리하였을 때, 콘크리트의 온도이력을 측정한 결과, 노출시킨 경우 약 10시간 이후부터 영하로 저하하였고, 비닐+양생포의 경우 약 42시간 이후부터 영하로 저하하였다. 반면, 비닐＋스티로폼+양생포를 사용한 양생의 경우에는 약 55시간 이후부터 영하로 저하하여 노출이나 일반적으로 많이 사용되는 비닐＋양생포와 비교하여 우수한 단열효과임이 밝혀졌다. 7일 및 28일에 있어 슬래브의 코어 압축강도를 측정한 결과는 단열재를 사용하였을 때 크게 나타났다.

• 복합신소재구조학회 논문집
• /
• 제4권1호
• /
• pp.33-39
• /
• 2013

Structural insulated panels, structurally performed panels consisting of a plastic insulation bonded between two structural panel facings, are one of emerging products with a viewpoint of its energy and construction efficiencies. These components are applicable to fabricated wood structures. In Korea, there are few technical documents regulated structural performance and engineering criteria in domestic market. This study was conducted to identify fundamental performance of both monotonic load and quasi static cyclic load for SIPs in shear wall application. Static test results showed that maximum load was 44.3kN, allowable shear load was 6.1kN/m, shear stiffness was 1.23 M N/m, and ductility ratio was 3.6. Cyclic test was conducted by two kinds of specimens : single panel and double panels. Cyclic test results, which were equivalent to static test results, showed that maximum load was 45.42kN, allowable shear load was 6.3kN/m. Furthermore the accumulated energy dissipation capability for double panels was as 2.3 times as that for single panel. From performance of structural tests, it was recommended that the allowable shear load for panels was at least 6.1kN/m.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.255-256
• /
• 2011

This study investigates the effect of a curing condition on the temperature history and strength development of concrete under -10℃. Combination of various curing methods was applied, i.e. a conventional form was combined with compressed insulation, heat panel and heat cable. Results showed that the concrete cured by a single use of a conventional form resulted in serious deterioration of early strength development. However, other concretes cured by the proposed curing methods maintained the temperature of the concretes between 5 and 20℃, and thus resulted in no frost damage.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.101-104
• /
• 2005

This study presents experimental results from the performance test of a scaled reverberation chamber for measurement of sound insulation of panels. Experimental investigations were conducted in various parameters such as tunneling effect source locations, and maximum sound transmission loss. It is evident that the tunneling effect which means the variation with specimen location on the test frame gives rise to more than 3 dB deviation. One of the objective of this study that compares measured results between a real reverberation chamber and a simplified test apparatus, by using a specimen of a sandwich panel. It shows qualitatively resonable agreement from which one can find a potential to provide a design tool.