• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.677-684
• /
• 2004

This paper describes a method for identifying the dynamic characteristics of air foil bearings for high speed turbomachinerys with the LS/IV method. In fact identifying the characteristics of air foil bearings is very difficult work, and it is tried to identify it. Experiments were conducted to determine the structural dynamic and hydrodynamic characteristics of air foil bearings. Numerical predictions compare the static and dynamic force performances. The housing of the bearing on the journal was driven by the impact hammer which were used to simulate impact force acting on air foil bearings. The characteristics of air foil bearings were extracted from the frequency response function (FRF) by LS(Least Square) method and IV(Instrumental Variable) method. The experiment was tested at 0 rpm and $10000\sim16000rpm$. And the test results were introduced about the dynamic characteristics of air foil bearings, and also compared with theoritical results.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.354-362
• /
• 2000

This paper identifies a discrete-time linear combustion model of Refuse Incineration Plant(RIP) which characterizes steam generation quantity, where the RIP is considered as a MIMO system with thirteen-inputs and one-output. The structure of RIP model is described as an ARX model which are analytically obtained from the combustion dynamics. Furthermore, using the Instrumental Variable(IV) identification algorithm, model structure and unknown parameters are identified from experimental input-output data sets, In result, it is shown that the identified ARX model well approximates the input-output combustion characteristics given by experimental data sets.

• 소음진동
• /
• 제6권5호
• /
• pp.679-684
• /
• 1996

The Instrumental Variable Method(IVM), modified from least square algorithm, is applied to parameter identification of a noise contaminated bearing test rig. The signal to noise ratio included in Frequency Response Function(FRF) can cause significant errors in parameter identification. Therefore, among several candidates of parameter identification method, results of the applied IVM were compared with noise-contaminated least square method. This study shows that the noise-contaminated least square method can have indonsistent accuracy depending on the degree of noise level, while the IVM has robuster performance to signal to noise ratio than least square method.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.556-562
• /
• 2002

This paper studies the identification of a combustion model, which is used to design a linear controller of a steam generation quantity and harmful exhaust gases of a Refuse Incineration Plant(RIP). Even though the RIP has strong nonlinearities and complexities, it is identified as a MIMO parametric ARX model from experimental input-output data sets. Unknown model parameters are decided from experimental input-output data sets, using system identification algorithm based on Instrumental Variables(IV) method. It is shown that the identified model well approximates the input-output combustion characteristics.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.34-41
• /
• 1999

This paper identifies a linear combustion model of Refuse Incineration Plant(RIP) which characterizes its combustion dynamics, where the proposed model has thirteen-inputs and one-output. The structure of the RIP model is given as an ARX model which obtained from the theoretical analysis. And then, some unknown model parameters are decided from experimental input-output data sets, using system identification algorithm based on Instrumental Variables(IV) method. In result, it is shown that the proposed model well approximates the input-output combustion characteristics riven by experimental data sets.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.1045-1050
• /
• 1988

The problem of applying the linear integral filter in analysis and parameter estimation of linear continuous systems is discussed. A discrete-time model, which is equivalent to that obtained using the bilinear z transformation, is derived and employed to predict system output. It is shown that the output error can be controlled through the sampling interval. In order to obtain unbiased estimates, an instrumental variable (IV) method is proposed, where the instrumental variables are constituted using adaptive filtering. Some problems on implementation of the recursive IV algorithm are discussed. Both theoretical analysis and simulation study are given to illustrate the proposed methods.

• 노동경제논집
• /
• 제35권1호
• /
• pp.111-136
• /
• 2012

본 연구는 한국여성정책연구원의 "여성가족패널조사(Korean Longitudinal Survey of Women & Families: KLoWF)" 자료를 이용하여 가족내 자녀수가 개별 자녀에 대한 사교육 투자에 미치는 영향을 분석한다. 자녀수의 내생성 문제를 해결하기 위해 본 연구에서는 첫째 자녀의 성별을 도구변수로 활용한다. 추정 결과에 의하면 자녀수가 개별 자녀에 대한 사교육 투자에 미치는 영향은 자녀의 성별에 따라 다른 방식으로 나타난다. 가족내 자녀수는 둘째 자녀 딸에 대한 사교육비 지출에는 부정적인 영향을 미치지만, 그것이 둘째 자녀 아들에게 미치는 영향은 확정적이지 않다. 이는 자녀의 수와 질 간의 대체관계가 성별에 따라 다르게 나타남을 암시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1-6
• /
• 1993

This report proposes a novel method of identification of continuous time-delay systems from sampled input-output data. By the aid of a digital pre-filter, an approximated discrete-time estimation model is first derived, in which the system parameters remain in their original form and the time delay need not be an integral multiple of th sampling period. Then an identification method combining the common linear least squares(LS) method or the instrumental variable(IV) method with the genetic algorithm(GA) is proposed. That is, the time-delay is selected by the GA, and the system parameters are estimated by the LS or IV method. Furthermore, the proposed method is extended to the case of multi-input multi-output systems where the time-delays in the individual input channels may differ each other. Simulation resutls show that our method yields consistent estimates even in the presence of high measurement noises.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2005년도 추계 학술발표회 논문집
• /
• pp.167-173
• /
• 2005

This paper presents an autocorrelation test that is applicable to dynamic panel data models with serially correlated errors. The residual-based GMM t-test is a significance test that is applied after estimating a dynamic model by using the instrumental variable(IV) method and is directly applicable to any other consistently estimated residuals. Monte Carlo simulations show that the t-test has considerably more power than the $m_2$ test or the Sargan test under both forms of serial correlation (i.e., AR(1) and MA(1)).

• Journal of the Korean Statistical Society
• /
• 제34권4호
• /
• pp.367-375
• /
• 2005

This paper presents an autocorrelation test that is applicable to dynamic panel data models with serially correlated errors. The residual-based GMM t-test is a significance test that is applied after estimating a dynamic model by using the instrumental variable (IV) method and is directly applicable to any other consistently estimated residuals. Monte Carlo simulations show that the t-test has considerably more power than the $m_2$ test or the Sargan test under both forms of serial correlation (i.e., AR(1) and MA(1)).