• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.84-89
• /
• 2014

This paper proposes the new multiple signal processing monitoring sensor for the marine installation. The recent marine technology is focused on underwater sensors and underwater sensor networks in order to measure, monitor, surveillance of and control of underwater environments. For these marine applications to be available, however, the provision of precise location information using monitoring sensor is essential. In this paper, the multiple signal processing circuit for obtaining the precise location information of marine installation sensor is developed and analyzed. The performance characteristics for obtaining the location information of marine installation sensor is analyzed. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably excellent performance for the monitoring for the marine installation.

• 설비공학논문집
• /
• 제30권1호
• /
• pp.1-9
• /
• 2018

Thermal performance of a heat sink for an inverter power stack was analyzed in terms of array and installation location of an Insulated Gate Bipolar Transistor (IGBT). Thermal flow around the heat sink was calculated with a numerical model that could simulate forced convection. Thermal performance was calculated depending on the array and location of high- and low-power IGBTs considering the maximum temperature of IGBT. The optimum array and installation location were found and causes were analyzed based on results of numerical analysis. For the numerical analysis, experiment design considered the installation location of IGBT, ratio of heat generation rates of high- and low-power IGBTs, and velocity of the inlet air as design variables. Based on numerical results, a correlation that could calculate thermal performance of the heat sink was suggested and the maximum temperature of the IGBT could be predicted depending on the installation method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1212-1216
• /
• 2014

This study aims to find out the best anode location for buried pipelines. Numerical simulation program known as CATPRO (Elsyca, Belgium) were used for confirming the best location of anodes and the effects of impressed current cathodic protection system. Applied conditions for numerical simulation were similar to on-site environmental conditions for optimal application of cathodic protection system. Used criterion of cathodic protection was NACE SP 0169, which describes that minimum requirement for cathodic protection is -850mV vs. CSE. Various layouts for anodes' installation were applied, which were distance between anodes, anode installation location, and applied current. The areas where cathodic protection potential was lower than -850mV vs. CSE was limited up to 50m from anode installation locations. It was founded numerical analysis obtain cost-effective and efficient cathodic protection methods before design and application the impressed cathodic protection system to on-site environment.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.411-413
• /
• 2022

본 논문에서는 FoV(Fiele Of View)에 따른 감지거리 변화와 반사체에 따른 감지거리 고려하여 TOF(Time Of Flight) 센서의 장착 위치를 측면부 설치 시와 전/후면부 설치 시로 나누어 맞춘 개발을 수행하도록 한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.87-90
• /
• 2002

Daylight responsive dimming system, which is always able to automatically maintain the target illuminance, is a energy strategic system. It is importance note that the photosensor depends how to be precisely indicated workplane illuminance at any location of indoor. Therefore, the purpose of this paper is to find out the optimum location and spatial characteristics of photosensor by considering the correlation for the correct calibration of workplane illuminance and photosensor signal.

• 한국정보통신학회논문지
• /
• 제16권5호
• /
• pp.1083-1094
• /
• 2012

현재 상용화 되어 있는 위치 추정 시스템은 높은 정확도로 다양한 서비스에 폭넓게 사용되고 있다. 그러나 위치추정 시스템은 실내에서 완벽하게 설치하지 않을 경우 위치 추정 정확도가 매우 좋지 않은 경향을 보인다. 본 논문에서는 Location Fingerprint 기법을 활용하여 완벽하게 설치되지 않은 위치 추정 시스템으로부터 얻은 위치 정보를 보정하여 객체의 위치 정확도를 향상시켜 설치비용을 최소화할 수 있는 실내 위치 추정 알고리즘을 제안한다. 본 논문에서는 실내 환경에서 우수한 위치 정밀도를 제공하는 UWB 기반의 Ubisense 시스템을 활용하였다. 결론적으로, 본 논문에서는 위치 추정 시스템에서 측정한 객체의 위치 정보를 보정함으로써 위치 정확도를 향상시킬 수 있었다.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.101-106
• /
• 2013

This paper proposes the new high precision monitoring sensor for the Marine Installation. Among variety of sensor network systems, wireless information transmission through the marine is one of the enabling technologies for the development of future marine-observation systems and sensor networks. Applications of marine monitoring range from oil industry to aquaculture, and include instrument monitoring, pollution control, climate recording, prediction of natural disturbances. For these marine applications to be available, however, the provision of precise location information using monitoring sensor is essential. In this paper, the dynamic characteristics for obtaining the location information of monitoring sensor is analyzed. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably excellent performance for the Monitoring for the Marine Installation.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.370-375
• /
• 2006

This paper suggests the method for estimating a partial discharge (PD) location using divide of the inside transformer as a grid. The PD location is found swiftly and economically compared with the typical method detecting a PD. The reason is that the location of PD is detected in the section. The estimation of PD location is trained using the Neural Network. JavaNNS(Java Neural Network Simulator) and SNNS(Stuttgart Neural Network Simulator) are used for searching the location of PD. The simulation procedure is following, The transformer is assumed that the case is a regular hexahedron. The sensor is installed in a proper location. A section of PD location is set as a target, and training set is studied with several PD locations in the inside of the transformer. As a result of training process, the learning capability of neural network is excellent. The PD location is detected by division of internal structure of transformer and application of neural network.

• 한국전산구조공학회논문집
• /
• 제33권5호
• /
• pp.303-310
• /
• 2020

본 연구에서는 인공신경망을 이용해 건물 구조물의 가속도계 설치 위치 및 개수를 선정하는 방법을 제안한다. 인공신경망의 입력층에는 층에 설치되는 가속도계로부터 얻는 가속도이력데이터가 입력되며, 출력층에는 구조물을 정의하는 각 층의 질량과 강성 값을 출력하도록 신경망을 구성한다. 가속도계의 설치 위치 및 개수를 선정하기 위해 여러 설치 시나리오를 가정하고 훈련을 통해 인공신경망을 구한다. 훈련에 사용되지 않은 예제를 이용해 예측 성능을 비교하였다. 센서 개수 및 위치에 따른 예측 성능을 비교하여 설치위치 및 개수를 선정한다. 6층과 10층 예제 적용을 통해 제안하는 방법을 검증하였다.

• 한국경영과학회지
• /
• 제24권3호
• /
• pp.93-107
• /
• 1999

We consider the development of an integer programming model and algorithm for the ATM switching node location problem. There are two kinds of facilities, hub facilities and remote facilities, with different capacities and installation costs. Each customer needs to be connected to one or more hub facilities via remote facilities, where the hub(remote) facilities need to be installed at the same candidate installation site of hub(remote) facility. We are given a set of customers with each demand requirements, a set of candidate installation sites of facilities, and connection costs between facilities, We need to determine the locations to place facilities, the number of facilities for each selected location, the set of customers who are connected to each installed hub facilities via installed remote facilities with minimum costs, while satisfying demand requirements of each customer. We formulate this problem as a general integer programming problem and solve it to optimality. In this paper, we develop a branch-and-cut algorithm with path variables. In the algorithm, we consider the integer knapsack polytope and derive valid inequalities. Computational experiments show that the algorithm works well in the real world situation. The results of this research can be used to develop optimization algorithms to solve capacitated facility location problems.