• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.3
• /
• pp.10-17
• /
• 2009

In this paper, we explained the relation between evaluating display device and emotional image quality evaluation in human perceptual view. It is also suggested two emotional image quality evaluation method of display reflecting human visual function. One is the color space of CIECAM02 and the other is capturing moving image. It is necessary to standardize the evaluation methods of image quality based on emotional evaluation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.60-63
• /
• 2000

In this paper, 7-segment was implemented using AC powder EL. ZnS:Cu and BaTiO3 was used as a phosphor and dielectric respectively. The preparation of phosphor and dielectric layer was performed with screen printing. The implemented system of 7-segment was divided as following; EL display, driving circuit, software for driving. The properties of fabricated devices was measured with EL spectrum and brightness.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.82-88
• /
• 2000

The paper considers the theoretical problem of eliminating harmonics in inverter waveforms. The problems associated with the harmonics distortion of PWM inverter devices were analysed. Voltage control methods are variable parameter each harmonics magnitude improve the voltage wareform.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.185-188
• /
• 2005

We present the method to obtain four speckle patterns with relative phase shift of ${\pi}/2$ by passive devices such as wave plate and polarizer, and calculate the phase at each point of the speckle pattern in shearographic system using Wollaston prism. And, we analyzed the phase error caused using wave plates by Jones matrix.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.176-179
• /
• 2006

We present the method to obtain four speckle patterns with relative phase shift of $\pi/2$ by passive devices such as wave plate and polarizer, and calculate the phase at each point of the speckle pattern in shearographic system using Wollaston in And, to demonstrate the feasibility of the proposed system, we present the experimental results using polymer insulator.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.281-284
• /
• 2009

In this paper, we review the effects of RF interference of medical equipment or other electric equipment which can emit radio frequency in the general hospitals environments which are in many cases being under the influence of various electromagnetic field. Using spectrum analysis method we found some devices could effect on the frequency of telemetry system. We also investigate the relationship between intensity of the signal and distance for the selected equipment used in hospitals.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.259-262
• /
• 2002

Application of combustion stabilization devices such as baffle and acoustic cavity to liquid propellant rocket engine is investigated to suppress high-frequency combustion instability, i.e., acoustic instability. First, these damping devices are designed based on linear damping theory. As a principal design parameter, damping factor is considered and calculated numerically in the chambers with various specifications of these devices. Next, the unbaffled chambers with/without acoustic cavities are tested experimentally for several operating conditions. The unbaffled chamber shows the specific stability characteristics depending on the operating condition and has small dynamic stability margin. The most hazardous frequency is clearly identified through Fast Fourier Transform. As a result, the acoustic cavity with the present design has little stabilization effect in this specific chamber. Finally, stability rating tests are conducted with the baffled chamber, where evident combustion stabilization is observed, which indicates sufficient damping effect. Thrust loss caused by baffle installation is about $2{\%}$.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.145-152
• /
• 2015

In the study, the effects of damping devices on damping ratio increase and wind-load reduction were investigated based on the computational platform, which is one of the parametric modeling methods. The computational platform helps the designers or engineers to evaluate the efficacy of the numerous alternative structural systems for irregular Super-Tall building, which is crucial in determining the capacity and the number of the supplemental damping devices for adding the required damping ratios to the building. The inherent damping ratio was estimated based on the related domestic and foreign researches conducted by using real wind-load records. Two types of damping devices were considered: One is inter-story installation type passive control devices and the other is mass type active control devices. The supplemental damping ratio due to the damping devices was calculated by means of equivalent static analysis using an equation suggested by FEMA. The optimal design of the damping devices was conducted by using the computational platform. The structural element quantity reduction effect resulting from the installation of the damping devices could be simply assessed by proposing a wind-load reduction factor, and the effectiveness of the proposed method was verified by a numerical example of a 455m high-rise building. The comparison between roof displacement and the story shear forces by the nonlinear time history analysis and the proposed method indicated that the proposed method could simply but approximately estimate the effects of the supplemental damping devices on the roof displacement and the member force reduction.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.757-761
• /
• 2024

The need to acquire a multi-mission modular ship to carry out the mosaic warfare of modern warfare is increasing. In such a modular ship, not only domestic R&D equipment/systems but also an manned/unmanned complex system purchased overseas must be mounted together. In order to successfully design/construction a multi-mission modular prototype battle ship and turn it into timely power, it is necessary to apply a new technology so that it can be installed flexibly in a limited space and time. However, the existing welding installation method not only limits flexibility in design/construction due to safety problems, but also has an inherent problem that the cost and time required to correct defects and supplements are excessive. Therefore, this study introduces the current status of next-generation installation devices developed/applied in the advanced navy and the field demonstration results applied to battle ships to provide flexibility in this respect.

• Journal of Advanced Research in Ocean Engineering
• /
• v.4 no.2
• /
• pp.47-52
• /
• 2018

The Korea Offshore Wind Power (KOWP) is planning to construct offshore wind energy farms with an overall rated power of 2.5 GW in the south-western coast of the country until 2019. Various types of support structures for offshore wind turbines have been proposed in the past. Nevertheless, in South Korea, jacket structures have in general, been applied as support structures for offshore wind turbines owing to the many accumulated experiences and know-how regarding this kind of support structure. The choice of offshore structure is mainly influenced by site conditions such as seabed soil type and sea environment during installation. In installing jacket sets on the seabed, the mudmat is necessary to maintain the equilibrium of the jacket without the aid of additional devices. Hence, this study proposes the installation of skirt plates underneath the bottom frame of jackets in order to improve the installation stability of jacket structures under rougher sea conditions. To confirm the effect of skirt plates, installation stability analyses considering overturning, sliding and bearing capacity have been performed. From the results, it is shown that jacket structures with skirt plates can contribute to improving the sliding stability of the structures of new wind power farms, while providing economic benefits.