• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.734-741
• /
• 2020

A new air-cooled waste heat removal system with a direct contact heat exchanger was designed for SMRs requiring 200 MW of waste heat removal. Conventional air-cooled systems use fin structure causing high thermal resistance; therefore, a large cooling tower is required. The new design replaces the fin structure with a vertical string type direct contact heat exchanger which has the most effective performance among tested heat exchangers in a previous study. The design results showed that the new system requires a cooling tower 50% smaller than that of the conventional system. However, droplet formation on a falling film along a string caused by Rayleigh-Plateau instability decreases heat removal performance of the new system. Analysis of Rayleigh-Plateau instability considering drag force on the falling film surface was developed. The analysis results showed that the instability can be prevented by providing thick string. The instability is prevented when the string radius exceeds the capillary length of liquid by a factor of 0.257 under stagnant air and 0.260 under 5 m/s air velocity.

• Steel and Composite Structures
• /
• v.22 no.6
• /
• pp.1239-1259
• /
• 2016

The modified couple stress-based third-order shear deformation theory is presented for sigmoid functionally graded materials (S-FGM) plates. The advantage of the modified couple stress theory is the involvement of only one material length scale parameter which causes to create symmetric couple stress tensor and to use it more easily. Analytical solution for dynamic instability analysis of S-FGM plates on elastic medium is investigated. The present models contain two-constituent material variation through the plate thickness. The equations of motion are derived from Hamilton's energy principle. The governing equations are then written in the form of Mathieu-Hill equations and then Bolotin's method is employed to determine the instability regions. The boundaries of the instability regions are represented in the dynamic load and excitation frequency plane. It is assumed that the elastic medium is modeled as Pasternak elastic medium. The effects of static and dynamic load, power law index, material length scale parameter, side-to-thickness ratio, and elastic medium parameter have been discussed. The width of the instability region for an S-FGM plate decreases with the decrease of material length scale parameter. The study is relevant to the dynamic simulation of micro structures embedded in elastic medium subjected to intense compression and tension.

• Annals of Clinical Neurophysiology
• /
• v.11 no.1
• /
• pp.9-15
• /
• 2009

Background: To investigate the differences of locomotor dynamics between Parkinson's disease (PD) patients with tremor dominant symptom and patients with postural instability dominant symptom. Methods: 66 subjects with PD were classified into two subgroups, tremor-dominant group and postural instability and gait disorder group by Unified Parkinson's disease rating scale (UPDRS). The spatial, temporal and electrodynamic gait parameters were recorded automatically using computerized 3-D motion analysis system with electrogoniometer. Results: There was no significant difference in cadence, pelvic tilt range, hip flexion range, knee flexion range and ankle dorsiflexion range. Postural instability and gait disorder group showed decreased gait velocity, short stride length, decreased range of motion in pelvic obliquity, pelvic rotation and ankle plantar flexion. Conclusions: There was meaningful difference in locomotor dynamics between Parkinson's disease(PD) patients with tremor dominant symptom and patients with postural instability dominant symptom.

• Journal of Mechanical Science and Technology
• /
• v.16 no.7
• /
• pp.1019-1028
• /
• 2002

The instability of two-phase loop thermosyphons was investigated experimentally and analytically. Three orifice type inserts were used to study the effect of change in the pressure drop in the flow channel of the TLT on the flow instability and temperature fluctuation. It is observed that a decrease in the size of the orifice insert from 3.7 mm (no insert) to 0.71 mm drastically reduced the fluctuation of the temperature, especially at the evaporator section of the TLT. With the orifice type insert of 0.71 mm for the TLT, the overall temperature fluctuation was almost completely eliminated, especially at higher power input to the TLT The analysis based on the Kelvin-Helmholtz instability theory seems to predict reasonable well the loop stability state of the TLT with experimentally determined constant factors.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.1-6
• /
• 2011

Flow instability is investigated in a two-dimensional channel with thin baffles placed symmetrically in the vertical direction and periodically in the streamwise dircetion. At low Reynolds numbers, the flow is steady and symmetric. Above a critical Reynolds number, the steady flow undergoes a Hopf bifurcation leading to unsteady periodic flow. As Reynolds number further increases, we observe the onset of secondary instability. At high Reynolds numbers, the two-dimensional periodic flow becomes three dimmensional. To identify the onset of secondary instability, we carry out Floquet stability analysis. We obseved the transition to 3D flow at a Reynolds number of about 125. Also, we computed dominant spanwise wavenumbers near the critical Reynolds number, and visualized vortical structures associated with the most unstable spanwise wave.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.144-149
• /
• 2008

A transient finite element simulation is developed for the two-dimensional stationary elastoplastic layer between sliding layers, to investigate thermoelastoplastic instability(TEPI) due to frictional heating in the material. The analysis will show some differences between the case of thermoelastic instability and TEPI, especially according to the contact pressure above yield stress. A transient behavior of contact pressure is captured to explain the behavior of thermoplasticity of contact with different sliding velocity. The instability of contact pressure in the long range of braking time will be explored to understand the generation mechanism of hot spots.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1650-1657
• /
• 2019

Fluidelastic instability and nonlinear dynamics of tube bundles is a key issue in a steam generator. Especially, once the post-instability motion of the tube becomes larger than the clearance gap to other tubes, effective contact or impact between the tubes under consideration and the other tube inevitable. There is seldom theoretical analysis to the nonlinear dynamic characteristics of a tube array in two-phase flow. In this paper, experimental and numerical studies were utilized to obtain the critical velocity of the flow-induced instability of a rotated triangular tube array. The calculation results agreed well with the experimental data. To explore the post-instability dynamics of the tube array system, a Runge-Kutta scheme was used to solve the nonlinear governing equations of tube motion. The numerical results indicated that, when the flow pitch velocity is larger than the critical velocity, the tube array system is undergoing a limit cycle motion, and the dynamic characteristics of the tube array are almost similar for different void fractions.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.37-50
• /
• 2020

A passive containment cooling system (PCCS) has been developed as advanced safety feature for innovative power reactor (iPOWER). Passive systems are inherently less stable than active systems and the PCCS encountered the flashing-induced instability previously identified. The objective of this study is to develop stability maps for flashing-induced instability using MARS (Multi-dimensional Analysis of Reactor Safety) code. Firstly, we conducted a series of sensitivity analysis to see the effects of time step size, nodalization, and alternative MARS user options on the onset of flashing-induced instability. The riser nodalization strongly affects the prediction of flashing in a long riser of the PCCS, while time step size and alternative user options do not. Based on the sensitivity analysis, a standard input and an analysis methodology were set up to develop the stability maps of PCCS. We found out that the calculated equilibrium quality at the exit of the riser as a stability boundary above 5 kW/㎡ was approximately 1.2%, which was in good agreement with Furuya's results. However, in case of a very low heat flux condition, the onset of instability occurred at the lower equilibrium quality. In addition, it was confirmed that inlet throttling reduces the unstable region.

• Korean Journal of Childcare and Education
• /
• v.13 no.6
• /
• pp.21-41
• /
• 2017

Objective: The purpose of this study was to examine the direct and indirect effects of mothers' and children's emotional instability and maternal affectionate-rational parenting on children's attributional style. Methods: The participants of this study were 253 4th, 5th and 6th grade elementary school students and their mothers in Seoul and Incheon. Data were analyzed by path analysis using AMOS 21.0. Results: The results were as follows: First, children's attributional style for negative and positive events was significantly related to children's emotional instability and maternal affectionate-rational parenting. Also, mothers' and children's emotional instability was significantly associated with affectionate-rational parenting. Second, mothers' emotional instability had indirect effects on children's attributional style for negative and positive events through maternal affectionate-rational parenting. Finally, children's emotional instability had not only significant effects on children's attributional style for positive achievement events, but also indirect effects on children's attributional style for negative and positive events through maternal affectionate-rational parenting. Conclusion/Implications: The results of this study suggest that both environmental and individual factors, including mothers'and children's emotional instability and maternal affectionate-rational parenting, need to be considered to explain children's attributional style. Also, these findings have implications for developing intervention programs for children's attributional style and parental education.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1545-1551
• /
• 2015

Purpose: Rectal cancers with high microsatellite-instable have clinical and pathological features that differentiate them from microsatellite-stable or low-frequency carcinomas, which was studied rarely in stage II rectal cancer, promoting the present investigation of the usefulness of microsatellite-instability status as a predictor of the benefit of adjuvant chemotherapy with fluorouracil in stage II rectal cancer. Patients and Methods: Data of 460 patients who underwent primary anterior resection with a double stapling technique for rectal carcinoma at a single institution from 2008 to 2012 were retrospectively collected. All patients experienced a total mesorectal excision (TME) operation. Survival analysis were analyzed using the Cox regression method. Results: Five-year rate of disease-free survival (DFS) was noted in 390 (84.8%) of 460 patients with stage II rectal cancer. Of 460 tissue specimens, 97 (21.1%) exhibited high-frequency microsatellite instability. Median age of the patients was 65 (50-71) and 185 (40.2%) were male. After univariate and multivariate analysis, microsatellite instability (p= 0.001), female sex (p<0.05) and fluorouracil-based adjuvant chemotherapy (p<0.001), the 3 factors were attributed to a favorable survival status independently. Among 201 patients who did not receive adjuvant chemotherapy, those cancers displaying high-frequency microsatellite instability had a better 5-year rate of DFS than tumors exhibiting microsatellite stability or low-frequency instability (HR, 13.61 [95% CI, 1.88 to 99.28]; p= 0.010), while in 259 patients who received adjuvant chemotherapy, there was no DFS difference between the two groups (p= 0.145). Furthermore, patients exhibiting microsatellite stability or low-frequency instability who received adjuvant chemotherapy had a better 5-year rate of DFS than patients did not (HR, 5.16 [95% CI, 2.90 to 9.18]; p<0.001), while patients exhibiting high-frequency microsatellite instability were not connected with increased DFS (p= 0.696). It was implied that female patients had better survival than male. Conclusion: Survival status after anterior resection of rectal carcinoma is related to the microsatellite instability status, adjuvant chemotherapy and gender. Fluorouracil-based adjuvant chemotherapy benefits patients of stage II rectal cancer with microsatellite-stable or low microsatellite-instable, but not those with high microsatellite-instable. Additionally, free of adjuvant chemotherapy, carcinomas with high microsatellite-instable have a better 5-year rate of DFS than those with microsatellite-stable or low microsatellite-instable, and female patients have a better survival as well.