Browse > Article
http://dx.doi.org/10.1016/j.net.2019.10.010

Design of air-cooled waste heat removal system with string type direct contact heat exchanger and investigation of oil film instability  

Moon, Jangsik (Korea Advanced Institute of Science and Technology)
Jeong, Yong Hoon (Korea Advanced Institute of Science and Technology)
Addad, Yacine (Khalifa University of Science and Technology)
Publication Information
Nuclear Engineering and Technology / v.52, no.4, 2020 , pp. 734-741 More about this Journal
Abstract
A new air-cooled waste heat removal system with a direct contact heat exchanger was designed for SMRs requiring 200 MW of waste heat removal. Conventional air-cooled systems use fin structure causing high thermal resistance; therefore, a large cooling tower is required. The new design replaces the fin structure with a vertical string type direct contact heat exchanger which has the most effective performance among tested heat exchangers in a previous study. The design results showed that the new system requires a cooling tower 50% smaller than that of the conventional system. However, droplet formation on a falling film along a string caused by Rayleigh-Plateau instability decreases heat removal performance of the new system. Analysis of Rayleigh-Plateau instability considering drag force on the falling film surface was developed. The analysis results showed that the instability can be prevented by providing thick string. The instability is prevented when the string radius exceeds the capillary length of liquid by a factor of 0.257 under stagnant air and 0.260 under 5 m/s air velocity.
Keywords
Air cooling system; Rayleigh-plateau instability; Direct contact heat exchanger; Waste heat removal system;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Z. Zeng, A. Sadeghpour, Y.S. Ju, Thermohydraulic characteristics of a multistring direct-contact heat exchanger, Int. J. Heat Mass Transf. 126 (2018) 536-544.   DOI
2 D. Quere, Thin films flowing on vertical fibers, Europhys. Lett. 13-8 (1990) 721.   DOI
3 I.L. Kliakhandler, S.H. Davis, S.G. Bankoff, Viscous beads on vertical fibre, J. Fluid Mech. 429 (2001) 381-390.   DOI
4 C. Duprat, C. Ruyer-Quil, F. Giorgiutti-Dauphine, Spatial evolution of a film flowing down a fiber, Phys. Fluids 21 (4) (2009) 042109.   DOI
5 G. Wu, M. Jin, J. Chen, Y. Bai, Y. Wu, Assessment of RVACS performance for small size lead-cooled fast reactor, Ann. Nucl. Energy 77 (2015) 310-317.   DOI
6 Y. Cengel, Heat and Mass Transfer: Fundamentals and Applications, McGraw-Hill Higher Education, 2014.
7 J. Moon, Y.H. Jeong, Dry cooling system with direct contact heat transfer on the falling film along vertical straight string, in: Transactions of the Korea Nuclear Society Spring Meeting, May, 2017.
8 M.N. Berberan-Santos, E.N. Bodunov, L. Pogliani, On the barometric formula, Am. J. Phys. 65 (5) (1997) 404-412.   DOI
9 F. Gallaire, P.T. Brun, Fluid dynamic instabilities: theory and application to pattern forming in complex media, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 375 (2093) (2017), 20160155.   DOI
10 F. Boulogne, M.A. Fardin, S. Lerouge, L. Pauchard, F. Giorgiutti-Dauphine, Suppression of the RayleighePlateau instability on a vertical fibre coated with wormlike micelle solutions, Soft Matter 9 (32) (2013) 7787-7796.   DOI
11 Spx Dry Cooling Systems, A Leadership in Dry Cooling Technologies, 2017.
12 J. Grünig, E. Lyagin, S. Horn, T. Skale, M. Kraume, Mass transfer characteristics of liquid films flowing down a vertical wire in a counter current gas flow, Chem. Eng. Sci. 69 (1) (2012) 329-339.   DOI
13 Shin-etsu, Silicone fluid performance test results. http://www.shinetsusilicone-global.com/catalog/pdf/kf96_e.pdf retrieved fromhttps:.
14 J. Moon, A.S. Alkaabi, Y.H. Jeong, Optimized design of residual heat removal system with dry cooling technology for the APR1400 design, in: The 11th International Topical Meeting on Nuclear Thermal-Hydraulics, Operation and Safety (NUTHOS-11), October, 2016.
15 Y. Zhang, S. Qiu, G. Su, W. Tian, Design and transient analyses of emergency passive residual heat removal system of CPR1000. Part I: air cooling condition, Prog. Nucl. Energy 53 (5) (2011) 471-479.   DOI
16 X. Yan, H. Sato, Y. Inaba, H. Noguchi, Y. Tachibana, K. Kunitomi, Evaluation of GTHTR300A nuclear power plant design with dry cooling, Int. J. Energy Res. 38 (11) (2014) 1467-1477.   DOI
17 D. Ter, Haar, Collected Papers of PL Kapitza, Elsevier, 2016.
18 G.F. Hewitt, G.L. Shires, T.R. Bott, Process Heat Transfer, FL, CRC press, Boca Raton, 1994.
19 G. Caruso, M. Fatone, A. Naviglio, An experimental study on natural draft-dry cooling tower as part of the passive system for the residual decay heat removal, in: Proceedings of ICAPP, July, 2007.
20 H. Zhai, E.S. Rubin, Performance and cost of wet and dry cooling systems for pulverized coal power plants with and without carbon capture and storage, Energy Policy 38 (10) (2010) 5653-5660.   DOI
21 Z. Zeng, A. Sadeghpour, G. Warrier, Y.S. Ju, Experimental study of heat transfer between thin liquid films flowing down a vertical string in the Rayleigh- Plateau instability regime and a counter flowing gas stream, Int. J. Heat Mass Transf. 108 (2017) 830-840.   DOI
22 H. Shabgard, H. Hu, M. Rahman, P. Boettcher, M. McCarthy, Y. Cho, Y. Sun, Indirect Dry Cooling of Power Plants Using Spray-Freezing of Phase Change Materials, 2015.
23 J. Moon, Y.H. Jeong, Study on various direct contact heat exchanger types for dry cooled waste heat removal system in SMRs, in: Transactions of the Korea Nuclear Society Spring Meeting, May, 2018.
24 L. Rayleigh, On the instability of jets, Proc. Lond. Math. Soc. 1 (1) (1878) 4-13.