• 한국전기전자재료학회논문지
• /
• 제34권5호
• /
• pp.371-381
• /
• 2021

A machine vision inspection system consists of a camera, optics, illumination, and image acquisition system. Especially a scanning system has to be made to measure a large inspection area. Therefore, a machine vision line scan camera needs a line scan light source. A line scan light source should have a high light intensity and a uniform intensity distribution. In this paper, an offset calibration and slope calibration methods are introduced to obtain a uniform light intensity profile. Offset calibration method is to remove the deviation of light intensity among channels through adding intensity difference. Slope calibration is to remove variation of light intensity slope according to the control step among channels through multiplying slope difference. We can obtain an improved light intensity profile through applying offset and slope calibration simultaneously. The proposed method can help to obtain clearer image with a high precision in a machine vision inspection system.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.626-634
• /
• 2011

The investigation of concrete structure typically relies on visual inspection which is one of the basic inspection techniques. Image processing techniques play a crucial role in the growing field of automatic surface inspection technique. However, kinds of inspection equipment, environmental condition and detection algorithm have much influence on the reliability of inspection result. This paper proposes a verification method and testing procedure for the reliability of inspection results and surveys characteristics of image acquisition systems and crack inspection algorithms.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.155-160
• /
• 2001

KS-code(KS B 0896) for nondestructive ultrasonic testing classifies the quality level by relative flaw size only. But flaw position is more important than the flaw size. Test blocks having artificial holes near surface show lower yield load than the blocks having deeply located holes from the surface. So, level calibration table was proposed for classifying the quality level of welded steel structures.

• 한국콘텐츠학회논문지
• /
• 제6권6호
• /
• pp.1-8
• /
• 2006

본 연구에서는 인쇄회로기판을 위한 자동 광학 검사시스템에서 핵심적인 기능인 보정 데이타 산출을 위한 기하학적 특징 기반 방법을 제안하였다. 현재 적용되고 있는 자동 광학 검사 시스템에서는 보정데이타 산출을 위해 작업자가 직접 수작업으로 모델을 설정하고 있고, 검사영상에 기하학적인 변화가 있는 경우 비검사영역이 생기는 등 문제가 발생되고 있다. 이는 검사 작업의 신뢰성에 영향을 미치게 됨은 물론 검사 처리 시간을 지연시키는 요인이 된다. 제안된 방법은 주어진 PCB 영상으로부터 기하학적인 모양이 적합한 모델을 자동으로 선정할 수 있고, 기하학적인 모델 매칭 기법을 통해 신뢰성 있는 보정데이타를 산출할 수 있다. 제안된 방법의 사용으로 검사 시스템을 보다 편리하게 사용할 수 있고, 수작업에 의한 모델설정으로 발생되는 불필요한 시간을 절약할 수 있다. 또한, 기하학적인 변화량에 관계없이 보정데이타 산출이 가능하고, 잘못된 모델 선정 등 부정확한 보정데이터의 사용시 발생되는 문제점을 해결할 수 있는 장점을 갖는다.

• 대한토목학회논문집
• /
• 제26권1D호
• /
• pp.17-21
• /
• 2006

ITS 장비의 체계적인 성능평가는 그 장비의 성능을 일정 수준 이상으로 유지하여 수집 가공 제공 정보의 신뢰성을 확보하기 위한 단계로 매우 중요한 위치를 차지하고 있다. 우리나라에서는 2001년의 "교통체계효율화법"에 ITS 장비의 성능평가와 관련하여 법적 근거가 마련되어 있음에도 불구하고 ITS 장비에 대한 검 교정이 체계적으로 이루어지지 않고 있다. 본 연구에서는 체계적이고 효율적인 ITS 장비의 검 교정체계 구축을 위한 기반을 마련하고자 한다. 이를 위해 국내외의 유사 사례와 ITS 이외 분야의 모범사례를 분석하여 검 교정체계 현황 및 절차 등을 개관하고 정책적인 시사점을 분석하여 제시한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.434-437
• /
• 2003

Evaluation or the patterning accuracy of e-beam lithography machines requires a high precision inspection system that is capable of measuring the true xy-locations of fiducial marks generated by the e-beam machine under test. Fiducial marks are fabricated on a single photo mask over the entire working area in the form of equally spaced two-dimensional grids. In performing the evaluation, the principles of self-calibration enable to determine the deviations of fiducial marks from their nominal xy-locations precisely, not being affected by the motion errors of the inspection system itself. It is. however, the fact that only repeatable motion errors can be eliminated, while random motion errors encountered in probing the locations of fiducial marks are not removed. Even worse, a random error occurring from the measurement of a single mark propagates and affects in determining locations of other marks, which phenomenon in fact limits the ultimate calibration accuracy of e-beam machines. In this paper, we describe an uncertainty analysis that has been made to investigate how random errors affect the final result of self-calibration of e-beam machines when one uses an optical inspection system equipped with high-resolution microscope objectives and a precision xy-stages. The guide of uncertainty analysis recommended by the International Organization for Standardization is faithfully followed along with necessary sensitivity analysis. The uncertainty analysis reveals that among the dominant components of the patterning accuracy of e-beam lithography, the rotationally symmetrical component is most significantly affected by random errors, whose propagation becomes more severe in a cascading manner as the number of fiducial marks increases

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.7-13
• /
• 1998

In this paper, an automatic ball-stud inspection system has been developed using the computer-aided vision system. Index table has been used to get the rapid measurement and multi-camera has been used to get the high resolution in physical system. Camera calibration was suggested to perform the reliable inspection. Image processing and data analysis algorithms for ball stud inspection system have been investigated and were performed quickly with high accuracy. As a result, inspection system of a ball stud could be used with a high resolution in real time.

• 한국압력기기공학회 논문집
• /
• 제9권1호
• /
• pp.25-30
• /
• 2013

The periodic inspection of piping and pressure vessels welds in nuclear power plant has to provide reliable result related to weld flaws, such as location, maximum amplitude response, ultrasonic length, height and finally the nature or flaw pattern. The founded flaw in ultrasonic inspection is accepted or rejected based on these data. Specially, the amplitude of flaw response is used as basic parameter for flaw sizing and it may cause some deviation in length sizing result. Currently the ultrasonic inspections in nuclear power plant components are performed by specific inspection procedure which describing inspection technique include inspection system, calibration methodology and flaw characterizing. To perform ultrasonic inspection during in-service inspection, reference gain should be established before starting ultrasonic inspection by the requirement of ASME code. This reference gain used as basic criteria to evaluate flaw sizing. Sometimes, a little difference in establishing reference gain between calibration and field condition can lead to deviation in flaw sizing. Due to this difference, the inspection result may cause flaw sizing error. Therefore, the objective of this study is to compare and evaluate the ultrasonic amplitude difference between air filled and water filled pipe in nuclear power plant. Additionally, the accuracy of flaw sizing is estimated by comparing both conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1120-1123
• /
• 1995

In this paper, an automatic B/STUD inspection system has been developed using the computer aided vision system. Index Table has been used to get the rapid measurement and multi-camera has been used to get the high resolution in mechanical system. Camera calibration was suggested to perform the reliable Inspection. Image processing and data analysis algorithms for B/STUD inspection system has been investigated and were performed quickly with high accuracy. As a result, Inspection system of a B/STUD can be measured with a high resolution in real time.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3422-3427
• /
• 2010

본 논문에서는 빠르게 움직이는 화물 대상체의 효율적인 검색을 위해 스테레오 X-선 영상을 이용하여 장치 켈리브레이션을 통한 최적화된 구조에 대하여 연구하였다. 스테레오 X-선 스캔 영상은 X-선 발생장치, 듀얼 라인 어래이 검출기, 컨베이어 시스템 등으로 구성된 특별하게 제작된 스테레오 X-선 검색 장치로부터 획득하였다. 스테레오 X-선 영상을 이용하여 영상과 실제 대상체의 3차원 형상 구성사이의 관계를 찾기 위해 센서에 대한 캘리브레이션을 수행하였다. 스테레오 영상을 얻기 위해 구성된 두 개의 검출기 사이의 거리를 다양하게 변화 시키며 획득한 영상을 이용하여 영상에서의 GCP(Ground Control Point)에 대하여 계산 하였다. 계산된 GCP 값과 실제 대상체의 GCP의 좌표값을 비교하여 오차가 작은 효율적인 장치의 구조에 대하여 결과를 얻었다. 실험의 결과는 화물검색을 위한 영상의 효율적인 가시화 및 스테레오 매칭의 정확도를 향상시키기 위해 활용될 것이다.