• 한국재료학회지
• /
• 제19권5호
• /
• pp.276-280
• /
• 2009

The effect of the initial packing structure on the plasticity of amorphous alloys was investigated by tracing the structural evolution of the amorphous solid inside a shear band. According to the molecular dynamics simulations, the structural evolution of the amorphous solids inside the shear band was more abrupt in the alloy with a higher initial packing density. Such a difference in the structural evolution within the shear band observed from the amorphous alloys with different initial packing density is believed to cause different degrees of shear localization, providing an answer to the fundamental question of why amorphous alloys show different plasticity. We clarify the structural origin of the plasticity of bulk amorphous alloys by exploring the microstructural aspects in view of the structural disordering, disorder-induced softening, and shear localization using molecular dynamics simulations based on the recently developed MEAM (modified embedded atom method) potential.

• 한국정밀공학회지
• /
• 제33권8호
• /
• pp.611-616
• /
• 2016

Computational fluid dynamic simulation based on the ABAQUS software was conducted to observe the inside flow of slot-die nozzle. The slot-die nozzle was modeled as 3-dimensional structure and three significant parameters were determined: inlet velocity of fluid, reservoir angles, number of strips none of which have been mentioned previously in the literature. The design of experiment, full factorial analysis was performed within determined design and process levels. The simulation result shows the inlet fluid velocity is most significant factor for the flows of inside nozzle. As an interaction effect, reservoir angle is closely related with number of strip that should address when the nozzle is designed. Moreover, the optimized values of each determined parameter were obtained as 35 mm/s of inlet velocity, 3 of strip numbers, and $22^{\circ}$ of reservoir angles. Based on these parameters, the outlet velocity was obtained as 0.53% of outlet uniformity which is improved from 8.67% of nominal results.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.447-450
• /
• 2005

본 논문은 IEEE 802.15.4 표준안을 기반으로 하는 ZIGBEE 무선통신 기술을 이용하여 실내에서 발생하는 오염공기(담배연기, 연료용 가스, 유기용제 등)를 감지하고 실내 정화를 시켜줌으로써 피부질환 및 호흡기 질환의 질병을 사전에 방지하기 위한 시스템 구현에 대하여 기술한다. ZIGBEE 무선 통신 기술은 낮은 전력 소모, 저비용, 최대 256 노드 수용, 32 Kbyte 이하의 단순한 프로토콜 구조 등의 특징을 갖는다. 하드웨어 플랫폼은 ZIGBEE 무선통신 기술을 위해 ATmel사의 ATmega128L, Chipcon사의 2.4GHz RF-IC CC2420와 실내의 공기오염 정도를 확인하는 먼지 센서(GP2Y1010AU)와 가스센서(GSBT11)로 구현하였다.

• 한국소음진동공학회논문집
• /
• 제23권7호
• /
• pp.662-668
• /
• 2013

In this paper, possibility of controlling motion of a floating structure using a tuned liquid damper (TLD) is numerically investigated. A TLD is a tank partially filled with liquid. Sloshing motion of liquid inside a tank is known to suppress movement of the tank subject to external excitations at specific frequency. The effects of sloshing phenomena inside a rectangular floating body on its surge motion are investigated by varying external excitation frequency. First, a grid-refinement study is carried out to ensure validity of grid independent numerical solutions using present numerical techniques. Then, surge motion of the floating body subjected to external wave is simulated for five different excitation frequencies of which the center frequency equals to the natural frequency of internal liquid sloshing. The normalized amplitudes of surge motion of the target floating body are compared according to the excitation frequency, for the cases with and without water inside the floating body. It is shown that the motion of the floating body can be minimized by matching the sloshing natural frequency to the excitation frequency.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.349-352
• /
• 2008

수축-확대 초음속 노즐 내부에 분출된 이차제트에 의한 추력편향 제어에 관한 실험적, 수치적 연구가 진행되었다. 특정위치(노즐 목으로부터 12mm 떨어진 곳)에서 분출되는 이차제트 유동전압이 변화할 때 나타나는 제트유동의 추력편향 특성이 관찰되었다. 수치해석 결과는 동일한 경계조건에서 수행된 과거 연구결과 및 본 연구에서 수행된 쉴러린 유동가시화 결과와 비교되었으며, 정성적으로 좋은 일치를 나타냈다. 추력편향의 특성은 노즐 내부의 경사충격파의 반사구조, 즉, 이차제트 압력비 SPR의 크기에 관계되어 있음이 관찰되었다.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.800-806
• /
• 2019

This paper presents a laboratory experiment on data acquisition technique that applied to the gamma radiation scanning coupled with computed tomography (CT) technique for inspection of broken nozzle inside the vertical vessel. The acquisition technique was developed to inspect a large diameter vessel when suspicious problem location is not easily accessed. This technique allows the installation of gamma radiation source (Cesium 137, Cs-137), and detectors (Sodium Iodine. NaI(Tl)) from the accessible location to the required location and performs the scanning by designed pattern. To demonstrate the designed technique, top opened tank which installed with six cut steel pipes diameter of 76.2 mm (3") at a certain position was selected. They were assumed to be a gas riser pipes inside the vessel. Three studied cases were performed, (a) projection of well installed six pipes, (b) projection of one out of six broken pipe and (c) one of nozzle was assumed to be failure and fell down until one out of six pipes was broken and obstructed by nozzle. Results clearly indicated the capability of developed technique to distinguish between normal situation case and abnormal situation cases.

• Journal of Applied Biological Chemistry
• /
• 제64권4호
• /
• pp.447-451
• /
• 2021

In this study, we discovered for the first time that linarin, a flavonoid compound, enhances melanin biosynthesis in B16F10 cells, and subsequently elucidated the underlying mechanism of linarin-induced melanogenesis. Linarin showed no cytotoxicity at a concentration of 42 μM and significantly increased intracellular tyrosinase activity and melanin content in B16F10 cells. Mechanistic analysis showed that linarin increased the expression of tyrosinase, tyrosinase-related protein 1 (TRP-1), and microphthalmia-associated transcription factor (MITF) that are related to melanogenesis. Moreover, linarin decreased the phosphorylation of extracellular signal-regulated kinase (ERK) and protein kinase B (AKT). Finally, we evaluated the effect of the structure-activity relationship of linarin and its aglycone on melanogenesis. The results indicated that linarin enhances the expression of melanogenic proteins by activating MITF expression via the modulation of mitogen-activated protein kinase (MAPK), phosphatidylinositol 3-kinase (PI3K), and protein kinase B signaling pathways in B16F10 cells, thereby enhancing melanogenesis.

• 한국환경복원기술학회지
• /
• 제23권2호
• /
• pp.49-67
• /
• 2020

This study was conducted to compare and analyze forest vegetation distributed in Geumosanseong-inside in Geumosan Provincial Park from 2017.10 to 2019.6. The vegetation structure was classified by the phytosociological method and TWINSPAN and the correlation between the community structure and the environmental factors was analyzed using DCCA ordination analydsis. The vegetation structures are Quercus mongolica, Fraxinus mandshurica, Q. acutissima, Larix leptolepis, Prunus padus and Morus alba community by the phytosociological method and 16 communities under TWINSPAN. The importance value of Q. mongolica(64.5) was the highest, and followed by F. mandshurica, L. leptolepis, Acer pseudosieboldianum, M. alba, P. padus, Q. acutissima, Sorbus alnifolia, P. serrulata var. pubescens, F. sieboldiana, Rhododendron schlippenbachii and Castanea crenata which is consistent with species having the dominance status by analysis of the vegetation structure. As the results of DBH analysis for taxon with high importance values, Q. mongolica and M. alba represented normal distribution, and thus, the dominance status of these species is likely to continue. L. leptolepis will maintain the dominance status due to high density of large individuals as compared with species above medium size. However, it will decrease because of high mortality after increase in age class. F. mandshurica and P. padus continue to show dominance status due to high density of young individuals as compared with species above medium size. Q. acutissima have high density of individuals above intermediate size and low density of young individuals, and thus, will maintain the dominance status. A. pseudosieboldianum, F. sieboldiana and R.schlippenbachii which are arborescent will present continuously high dominance status because of high density of young individuals. Soil analysis shows that whereas pH, Ca²⁺ and Mg²⁺ in the research area were lower than the average values of overall forest soil and O.M, T-N, C.E.C and P₂O₅ were higher. We expected that these results were due to agricultures until 50 years ago in Geumosanseong-inside. As a result of DCCA ordination analysis using eleven environmental factors and communities classified by the phytosociological method analysis showed that Q. mongolica was distributed in the environment with higher elevation and O.M and steep slope, and lower P₂O₅, Mg²⁺ and Ca²⁺. In contrast to F. mandshurica, Q. acutissima was distributed in higher K⁺ and lower pH. L. leptolepsis was distributed in various environment.

• Tribology and Lubricants
• /
• 제28권1호
• /
• pp.7-11
• /
• 2012

In this paper, the results of finite element(FE) analysis of chemical mechanical polishing(CMP) process using 2-dimensional elements were discussed. The objective of this study is to find the generation mechanism of microscratches on a wafer surface during the process. Especially, a FE model with a particle inside pad pore was considered to observe how such a contact situation could contribute to microscratch generation. The results of the finite element simulations revealed that during CMP process the pad-particle mixture could be formed and this would be a major factor leading to microscratch generation.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.425-428
• /
• 2007

In order to measure corrosion level of reinforcement rebar which is inside reinforced concrete structure, infrared thermographic technique was employed. Experimental test parameters were ambient temperatures, various levels of corrosion states. After analysis of temperature distributions of concrete surface, the amount of heat flux from the concrete surface is directly proportional to the corrosion level which is inside of concrete.