• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.205-213
• /
• 2021

Due to the advantage of reducing the voltage applied to the switch semiconductor, the input series and output parallel combination is widely used in systems with high input voltage and large output current. On the other hand, the LLC converter is widely used as a high-efficiency power converter, and when connected by ISOP combination, there is a possibility that input voltage imbalance may occur due to a mismatch of passive devices. To avoid damaging the switching device, this study analyzed the DC-link voltage imbalance of a high-capacity supply using an ISOP LLC converter. In addition, the case where DC-link unbalance control was applied and the case not applied was analyzed respectively. Based on this analysis, an initial start-up algorithm was proposed to prevent input power semiconductor device damage due to DC-link over-voltage. The effectiveness of the proposed algorithm has been verified through simulations and experiments.

• Journal of Information Processing Systems
• /
• v.6 no.3
• /
• pp.347-358
• /
• 2010

This paper presents a measurement system for 3D hand-drawn gesture motion. Many pen-type input devices with Inertial Measurement Units (IMU) have been developed to estimate 3D hand-drawn gesture using the measured acceleration and/or the angular velocity of the device. The crucial procedure in developing these devices is to measure and to analyze their motion or trajectory. In order to verify the trajectory estimated by an IMU-based input device, it is necessary to compare the estimated trajectory to the real trajectory. For measuring the real trajectory of the pen-type device, a PHANToMTM haptic device is utilized because it allows us to measure the 3D motion of the object in real-time. Even though the PHANToMTM measures the position of the hand gesture well, poor initialization may produce a large amount of error. Therefore, this paper proposes a calibration method which can minimize measurement errors.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.19-29
• /
• 2009

For two input ESD protection schemes utilizing the NMOS protection device or the lvtr_thyristor protection device, which is suitable for high-frequency CMOS ICs, we attempt an in-depth comparison study on the HBM ESD protection level in terms of lattice heating inside the protection devices and the peak voltage applied to the gate oxides in the input buffer through DC, mixed-mode transient, and AC analyses utilizing the 2-dimensional device simulator. For this purpose, we suggest a method for the equivalent circuit modeling of the input HBM test environment for the CMOS chip equipped with the input ESD protection circuit. And by executing mixed-mode simulations including up to four protection devices and analyzing the results for five different test modes, we attempt a detailed analysis on the problems which can be occurred in a real HBM test. In this procedure, we explain about the strength and weakness of the two protection schemes as an input protection circuit for high-frequency ICs, and suggest guidelines relating to the design of the protection devices.

• Clean Technology
• /
• v.23 no.3
• /
• pp.248-255
• /
• 2017

In dismantling factories for recycling, it is important to input actual working data to a personal computer (PC) in order to monitor the work results and related recycling rate of the inputs. This should be performed with a keyboard, a mouse, or other devices. But when a worker is working in the factory, it could be bothersome or time consuming to go to the PC. Especially, workers who works at dismantling factories have a generally low education level are scared to use a PC, which could be used as a pretext for not using the PC. In some cases, data input is performed by a worker after the day's job. In this case, it could take additional time, the worker can make more mistakes, and the data could be unreliable. In this study, we developed a man-machine interface (MMI) device using a safety helmet. A joystick-like device, pushbuttons, and a radio frequency (RF) device for wireless communication is equipped in a safety helmet. This MMI device has functions similar to a PC mouse, and it has a long communication distance. RF is used because it consumes less battery power than Bluetooth. With this MMI device, workers need not go to a PC to input data or to control the PC, and they can control the PC from a long distance. The efficiency of PCs in a factory could be increased by using the developed MMI system, and workers at the dismantling factories could have less reluctance in using the PC.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1820-1822
• /
• 2007

In this paper we fabricated a fiber device composed of cascaded long-period fiber gratings between which a birefringent erbium-doped fiber was inserted and proposed its application as a polarization-controlled interleaved signal gating fiber device. Because the core and cladding modes of the fabricated fiber device have polarization-dependent phase difference due to the birefringence of the erbium-doped fiber, its interference spectrum can be modulated by varying the input polarization.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.4
• /
• pp.429-441
• /
• 2002

This paper concerns extracting 3D motion information from a 3D input device in real time focused to enabling effective human-computer interaction. In particular, we develop a novel algorithm for extracting 6 degrees-of-freedom motion information from a 3D input device by employing an epipolar geometry of stereo camera, color, motion, and structure information, free from requiring the aid of camera calibration object. To extract 3D motion, we first determine the epipolar geometry of stereo camera by computing the perspective projection matrix and perspective distortion matrix. We then incorporate the proposed Motion Adaptive Weighted Unmatched Pixel Count algorithm performing color transformation, unmatched pixel counting, discrete Kalman filtering, and principal component analysis. The extracted 3D motion information can be applied to controlling virtual objects or aiding the navigation device that controls the viewpoint of a user in virtual reality setting. Since the stereo vision-based 3D input device is wireless, it provides users with a means for more natural and efficient interface, thus effectively realizing a feeling of immersion.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.319-325
• /
• 2011

In this paper, we propose the matching model between virtual reality and the real-world for peoples with limited mobility. The proposed matching model is consist of four parts: wearable input device-based PC control, hand-motion pattern recognition, application software, and matching between virtual reality and the real-world. To recognition mouse functions and hand-motion patterns from six-axis coordinate of wearable input device, RF communication is used. In addition, to easily control the real-world, virtual reality has been implemented with realism of the real-world. Some experiments are conducted so as to verify the proposed model, and as a result, hand-motion recognition as well as virtual reality control are well performed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1321-1328
• /
• 2015

A radio is a half-duplex voice communication method using the PTT(: Push To Talk), occupy a single line calls during transmission. As an interface between the telephone and the radio, UHF and VHF, for voice communication between the different heterogeneous devices, A device automatically switches between the two devices is required. Therefore, in accordance with the performance of the voice switching apparatus for detecting a voice to be transmitted from an input signal, loss of the audio signal to be transmitted is subjected to Significant influence. Conventional method has the problem responding to noise by setting the level through simple means of amplitude of input signal, in other words, the energy level of the input signal. This paper, by using the audio signal processing techniques, this discriminated what the voice is among the input signal and substantiated a device for the automatic voice transmission between heterogeneous devices. With this proposal, I was confirmed of improvement of performance in the automatic voice switching device, could perform loss-less transmission of voice between heterogeneous devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2656-2664
• /
• 2015

IoT management hub has to request the WLAN AP list of the accessible areas in a place that is installed, or choose a specific WLAN AP you want to connect in order to be connected to the Internet. the specific method also is required to input the password when the security key was set. As that way, IoT management hub needs both the display device and the input device to see the list of WLAN AP and to input the security key. If the IoT management hub is consist of them, It is difficult to achieve the objective of the miniaturization and cost reduction. In this paper, we propose a method to connect to a WLAN AP network using a smart-phone without the display device and the input device.

• Journal of Applied Reliability
• /
• v.18 no.1
• /
• pp.40-48
• /
• 2018

Purpose: This research is to develop Trailer Durability Test of towing device, in order to cover usage conditions of bike type as well as general type trailer. With the diversification of leisure activities, the population that enjoys various sports and leisure has increased rapidly, and the number of vehicles equipped with camping trailers and bike carriers is also increasing steadily. The purpose of this study is to develop a durable vehicle that has no problem in various customer conditions. Methods: We measured the input load under various conditions of the user by attaching load cell to the body fixing part and towing ball of the towing device. The load in various modes was measured, and the difference between the trailer and the bike carrier type was compared and analyzed. Results: Due to the difference in fixing method and weight between the two types, the trailer has a large longitudinal force and the bike type has a large vertical force. Therefore, it is necessary to durability test method capable of satisfying all longitudinal force and vertical force. Conclusion: We improved the durability test of the towing device by changing the test surface. The new mode has made it possible to shorten the durability test schedule by increasing test efficiency.