• 한국물환경학회지
• /
• 제21권5호
• /
• pp.431-441
• /
• 2005

The study was carried out to improve and regulate the drinking water quality standard and drinking water quality monitoring substances. For the reliability and safety of finished water, It has been monitored for trace organic and inorganic compounds of 333 in finished water of water treatment plants during 1989 to 2003. As a result of monitoring, 51 compounds were detected from 333 compounds, and it has been regulated the drinking water quality standard of 26 substances and 20 mitoring substance. Improvement and regulation method of the drinking water quality standard was performed by comparing and analyzing with detection concentration, detection frequency, risk assessment and foreign drinking water quality standard.

• 한국미생물·생명공학회지
• /
• 제14권4호
• /
• pp.279-283
• /
• 1986

홍삼제품 제조 과정중의 부산물인 홍삼박의 활용 가능성을 조사하기 위하여 여러 가지 담자균의 배양에 홍삼박 추출물을 첨가하여 배양한 후 균체 증식량, 단백질 및 amino acid함량 등을 조사하였으며 그 결과를 보고하는 바이다. 수집 된 담자균 중 G. lucidum과 P. ostreatus가 액체배양에서 균체증식이 양호한 균주로 선발되었으며, 홍삼박 추출물을 0.2％ 첨가하였을 때 균체증식량이 가장 많았으며 단백질 함량은 0.5％ 첨가하였을 때 l-3％가 증가하였다. Amino acid함량은 인삼박 추출물을 0.2％ 첨가하였을 때는 거의 변화가 없었으나 0.5％ 첨가하였을 때에는 G. lucidum, P. ostreatus 모두 상당히 증가하였으며 그 증가폭 중 cysteine이 가장 컸다.

• 대한치과교정학회지
• /
• 제11권1호
• /
• pp.17-23
• /
• 1981

This experiment was performed to investigate the response of inorganic substances in alveolar bone in relation to the experimental tooth movement. Right canine in maxillary jaw was tipped in cats by coil springs generating 80 gm. force, in mandibular jaw, the force was 100 gm. force. Cats were divided into five groups and orthodontically treated for one hour, 1, 7, 14 and 28 days, respectively. Alveolar bone samples were obtained from tension and compression sites as well as from contralateral control sites. The level of calcium of alveolar bone was determined by atomic absorption spectrophotometry and inorganic phosphorus was measured by spectrophotometry. The results obtained were as follows: 1. In tension and compression site of maxillary alveolar bone, calcium levels were decreased at 1, 7 and 14 days, but recovered at 28 days. 2. The levels of inorganic phosphorus in compression site of maxillary alveolar bone had little change but in tension site of maxillary alveolar bone , phosphorous levels were decreased, 3. Calcium levels in tension and compression site of mandibular alveolar bone were decreased, especially at 28 days. 4. In tension and compression site of mandibular alveolar bone, inorganic phosphorus were slightly decreased from 1 day.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.21-25
• /
• 2001

Jeung-pyun added to mulberry leaves powder was tested to prove in inorganic ingredients, physical function, chromaticity and rheometer. For cake, mulberry leaves powder were added to rice flour in the ratio of 0%, 1%, 2%, and 3% respectively. In inorganic ingredients test, the amounts of calcium, magnesium and potassium were increased according to adding levels of mulberry leaves powder. But the amounts of iron, copper and zinc, were not correlated with it. Calcium, magnesium and potassium are anti-hypertension inorganic substances. Thus, it is considered that food with plenty amountsz of inorganic ingredients is an effective diet for the patients who suffer from cardiovascular disease. In physical evalution test, the ratio of mulberry leaves powder was not correlated with the appearance of Jeung-pyun. The value of color decreased as the ratio of mulberry leaves powder increases. In texture, Jeung-pyun. The value of color decreased as the ratio of mulberry leaves power increase. In texture, Jeung-pyun added with 2% mulberry leaves powder had the highest value. In moisture, as the level of mulberry leaves powder was increased, the value was decreased. In rheometer test, Jeung-pyun 0% mulberry leaves powder had the highest value in hardness. While the ratio of mulberry leaves powder was not correlated with cohesiveness. Jeung-pyun added to 1% mulberry leaves powder had the highest value. In gummines and brittleness, 0% Jeung-pyun had the highest value, but the ratio was not correlate with cohesiveness.

• 한국물환경학회지
• /
• 제32권5호
• /
• pp.458-464
• /
• 2016

This study evaluated the dewatering efficiency of inorganic dehydrating agents that contain oyster shells. A filter press dehydrator was used for this study. The experiments were performed by the single injection of calcium-based chemicals, the single injection of oyster shells, and the mixed injection of oyster shells and calcium-based chemicals. The moisture content of the dewatered cake generated after dehydration confirmed that the best dewatering efficiency was found at the mixing ratios of CaCO₃ to sludge, oyster shell to sludge, and inorganic dehydrating agent to sludge of 3:1, 10:1, and 1.5:2.5:1, respectively. The moisture contents exhibited less than 58% when the injection mixing ratio of inorganic dehydrating agent to sludge was 1.5:2.5:1. From EPS, SEM, and EDX analysis, it was found that the calcium adsorbed on the sludge surface could reduce extracellular polymeric substances (EPSs) and enhanced the dewaterbility. Based on the above results, it is considered possible to apply inorganic dehydrating agents containing recycled oyster shells in sludge dewatering in order to reduce sludge.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.120-129
• /
• 1997

The fire protective coating can reduce certain damages in case of fire, also conserve energy by thermal insulation and prevent corrosion and errosion in normal daily life by means of blocking thermal transfer, that were generally made of organic, inorganic and metallic materials as adiabatic coating. In case of inorganic material such as soluble silicate, it produces less toxic substances which are exposed to Ore, and have a plenty of raw material. Also inorganic thermal insulator is good in heat resistance. To develope such a excellent inorganic thermal insulator, the study of fire protective coating using the alkali silicate is necessary The principle of intumescence for alkali silicate is from rapid evolution of water in the coating material, the quantity of water in it is of course influenced on the degree of intumescence. The phenomenon of intumescence in ternary silicate is increased as the radius of ion is bigger, and this is caused by evolution of so many kinds of water. The individual degree of intumescence is ordered like this ; $K^+$ > $Na^+$ > $Li^+$ . The best protection effect is similarity found to intumescence of ternary silicate. The result of X-ray diffraction analysis indicates that $KHSi_2O_5$ is an important ingredient in K-silicate.

• 분석과학
• /
• 제37권5호
• /
• pp.295-305
• /
• 2024

5-Hydroxymethyl-2-furaldehyde (5-HMF) is considered one of the main quality indexes of various food products. Its metabolism in humans can potentially lead to carcinogenic compounds. Metallic ions such as Zn, Mg, Mn, and Fe have been reported to enhance 5-HMF formation. Recently, studies on adsorbents that can extract specific organic and inorganic substances with one adsorbent have been conducted. However, simultaneous analysis of organic and inorganic materials typically requires distinct pre-treatment and analytical methods, which increase a lot of labor and cost. In this study, hybrid imprinted polymer (HIP) by mixing 5-HMF imprinted polymer (FIP) and zinc ion imprinted polymer (ZIIP) were generated to extract two analytes, Zn ion and 5-HMF, simultaneously. Physicochemical characterization of HIP was conducted by Fourier-transform infrared spectroscopy, scanning electron microscopy, and sorption tests. Extraction conditions including adsorbent mixing ratio, adsorbate mixing range, and equilibrium time were optimized. Freundlich adsorption model was as the best-fitting isotherm model to elucidate the adsorption mechanism. Affinity of Zn ion and 5-HMF on HIP was superior to non-HIP. In conclusion, HIP showed reasonable feasibility that could be used as an adsorbent to be used for simultaneous extraction of organic and inorganic compounds present in the sample.

• 복식
• /
• 제49권
• /
• pp.49-63
• /
• 1999

This research utilized the Energy Dispersive X-ray Spectroscopy(EDS) and the Inductively Coupled Plasma Mass Spectrometry in the analysis of chemical elements present among the textiles exhumed from Kupori Hwasung-kun Kyunggi-do. The two research objectives were: first to examine the elements present and their percent presence in Kupori samples: second to investigate whether the elements are part of mordant substances which could have been used when dyeing the KUpori textiles in the past. To meet such research purposes standard silk fabric was dyed with Sophorajaponica using alum and iron mordants. For alum mordant unpurified general alum and potassium aluminum sulfate(AlK(SO4)2). iron sulfate(FeSO4·7H2O) were used, From the results of EDS and ICP-Mass analysis the following conclusions were drawn. 1 According to the EDS analysis 9 elements Ca, S, Al, Si, K, Fe, P, Mg and Na were detected. 2. ICP-Mass result of the mordant chemicas showed high amount of A, Al and k present in alum mordants and S and Fe present in iron mordants. 3. Comparison of the ICP-Mass results of the mordant chemicals and those of the standard dyed samples suggested that the amount presence of Al and Fe is a strong indication of the usage of alum and iron mordants respecticely in an unknown dyed textile. 4, In the washed Kupori textiles Fe showed a relatively higher rate of presence in the samples Therefore it can be conjectured that those Kupori textiles were dyed with iron mordant based on the result of the above number 3. 5. It is probable that the other elements detected from the Kupori samples were incorporated into the textiles as part of the soil debris produced from the degradation of the dead within the coffin or the earth debris. They can also be part of the inorganic compounds inherent in the silk textiles themselves before dyed. 6. Among the elements it is likely that Ca which showed a high degree of presence among the unwashed samples was part of the inorganic compound inferent in the silk textiles.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.15-34
• /
• 2004

Diverse benefits such as reduction of fresh water consumption and effluent discharge, efficient use of raw materials and energy savings can be obtained by papermaking system closure. Closure of papermaking processes, however, causes many problems including reduction of the efficiency of additives, decrease of retention and dewatering, felt plugging, poor Paper quality, generation of slime and odor, poor vacuum efficiency, etc, and it has been recognized that accumulation of Inorganic and organic substances in the process white water is the prime cause of these problems. Therefore, technological developments for preventing accumulation of these detrimental substances are urgently required for Implementing papermaking system closure. Understanding of the accumulation phenomena of the inorganic and organic substances in the papermaking process white water is prerequisite for papermaking system closure. In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch In the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Starch adsorption and desorption models were developed based on the concept of starch adsorption ratio, which was not considered in previous studies. Steady state simulation studies were carried out based on this model using a commercial simulator. In steady state simulation, the variation of dissolved starch concentration in each process unit was monitored as a function of white water usage for wire shower. The result of the steady state simulation showed that dissolved starch concentration and its increase ratio in Process units increased as white water usage ratio for wire shower increased.

• 한국화재소방학회논문지
• /
• 제31권4호
• /
• pp.12-19
• /
• 2017

본 논문은 유-무기 하이브리드 방염제의 성능특성에 관한 연구로써 건축물의 실내장식물로 많이 사용되고 있는 MDF 합판을 이용하여 유-무기 하이브리드 방염제 처리 유 무에 따른 실험시료를 제작하였다. 그 후 $45^{\circ}$ 연소시험기를 이용한 방염성능 측정실험과 콘칼로미터를 이용한 연소특성 측정실험을 진행을 진행하여 유-무기 하이브리드 방염제의 성능특성을 확인하였다. 실험결과 유-무기 하이브리드 방염제의 경우 무기물 및 유기물의 장점 모두 가지고 있어 내열성 및 내구성, 부착성이 크게 향상되는 것을 확인할 수 있었다. 또한, 연소가스 발생량의 저감효과와 연기발생의 감연효과 등 방염성능이 우수하게 나타났다.