• 대한화장품학회지
• /
• 제47권4호
• /
• pp.289-296
• /
• 2021

본 연구에서는 국내 유통 중인 민감성 피부 대상 자외선 차단제의 안전성 조사를 위해 무기 자외선 차단제 27 건 및 어린이용 자외선 차단제 23 건을 수거하여 자외선 차단 성분 17 종, 보존제 13 종 및 중금속 5 종의 사용 및 혼입 실태을 조사하였다. 그 결과 자외선 차단 성분은 티타늄디옥사이드(41 건), 징크옥사이드(29 건), 비스-에칠헥실옥시페놀메톡시페닐트리아진(10 건) 에칠헥실살리실레이트(8 건) 및 에칠헥실메톡시신나메이트(8 건)순으로 검출되었으며, 보존제는 페녹시에탄올(6 건), 안식향산(1 건), 디히드로초산(1 건) 순으로 검출되었다. 확인된 자외선 차단성분은 모두 표시 사항에 적합 하였으나, 1 개 제품에서 표시사항 외 보존제 성분인 페녹시에탄올이 0.1% 농도로 검출되었다. 중금속 납, 카드뮴, 비소, 안티몬, 니켈은 불검출에서 3.6 ㎍/g로 다양한 농도로 검출되었다. 이번 연구에서 확인된 자외선 차단성분, 보존제 및 중금속은 화장품 안전기준 등에 관한 규정의 성분별 최대 배합한도 및 최대 허용량 기준에 적합하였다.

• 환경영향평가
• /
• 제32권5호
• /
• pp.353-362
• /
• 2023

TOC는 수중에 있는 유기물질의 90% 이상을 측정할 수 있으며 신속하고 용이하게 측정할 수 있기 때문에 기존에 사용된 유기오염물질의 지표인 BOD와 COD를 대체하고 있다. 수질오염공정시험기준에 따라 TOC를 측정할 때, 시료의 총탄소 중 무기탄소 비율이 50% 이상일 경우 NPOC법으로 분석하고, 휘발성유기화합물이 수 mg/L 이상일 경우 가감(TC-IC)법으로 분석하도록 규정되어 있다. 이러한 분석조건의 제한성을 검증하기 위해 정제수에 총유기탄소와 무기성 탄소의 비율이 다르게 하여 시험용액에서 총유기 탄소 농도결과를 확인하였는데 가감법과 NPOC법에서 큰 차이가 나타나지 않았다. 휘발성유기화합물 표준 용액을 첨가한 시료를 측정한 결과, NPOC법으로 분석할 때에 퍼징으로 인해 유실되는 탄소량은 크지 않은 것으로 나타나 시료에 휘발성유기화합물이 존재 시 분석방법에 따른 차이는 크지 않은 것으로 판단된다. 수질오염공정시험기준과 환경측정기기의 형식승인·정도검사 등에 관한 고시의 기준에 의한 판정 결과가 달라지는 경우를 판단하기 위해 국내에서 널리 사용하고 있는 2종류의 총유기탄소분석기의 현장시료 농도값 차를 비교한 결과, 제조사에 따라 NPOC법과 가감법에서 0.02~0.83 mg/L 차이가 있었으며, 이에 따라 기기 선정시 주의가 필요할 것으로 판단되었다.

• 보존과학연구
• /
• 통권26호
• /
• pp.165-188
• /
• 2005

From the ancient to these days, there have been used many kinds of pigment which have two types that are inorganic pigment and organic pigment. At the ancient times, natural pigment had been used but the artificially mixed pigment has been used in modern times. By the way, searching for studies has been studied recently, it would be said the ancient pigments such as Danchung, Wall painting and Mural painting are the mainthema. However, studies about the pigments used in modern pictured relics have rarely can be found. Therefore, this analysis of Ilweolokdo would be important at the point of the pigments used in pictures of royal family in modern times and the results can be briefly summarized as below; Firstly, the results of qualitative analysis of the pigments that base or all pigments of picture was detected components of Ca, Fe and As, this results meaning that picture was used filler and basic paint. Secondly, a result of the analysis on the composition elements of the pigments shows that the main components in their composition are ;White - Lead Cyanamide($2PbCO_3$.$Pb(OH)_2$) or Titanium Oxide($TiO_2$)Blue - Ultramarine($2(Na_2O$.$Al_2O_3$ .$2Si_O2$).$Na_2S_2$)Green - Emerald green($C_2H_3A_s3Cu_2O_8$)Gold - Gold(Au), Red-Red Lead($Pb_3O_4$) or Cinnabar(HgS)Black - Carbon(C)Thirdly, X-ray diffraction analysis of crystalline structure for the blue and green pigment peeling off in picture shows that the components of blue pigment is Ultramarine($2(Na_2O$.$Al_2O_3$ .$2Si_O2$).$Na_2S_2$) and green pigment is Emerald green($C_2H_3A_s3Cu_2O_8$). Especially, microcrystalline structure of the green pigment was the shape like a cross section of wood. Consequently, we knew through the analysis of qualitative and microcrystallinestructures seen on the cross section of analyzed pigments layer that the all pigments used in the Ilweoloakdo is possible to use synthetic pigments in modern.

• Journal of Microbiology and Biotechnology
• /
• 제28권7호
• /
• pp.1156-1167
• /
• 2018

The aim of this study was to isolate and characterize lead (Pb)-solubilizing bacteria from heavy metal-contaminated mine soils and to evaluate their inoculation effects on the growth and Pb absorption of Brassica juncea. The isolates were also evaluated for their plant growth-promoting characteristics as well as heavy metal and salt tolerance. A total of 171 Pb-tolerant isolates were identified, of which only 15 bacterial strains were able to produce clear haloes in solid medium containing PbO or $PbCO_3$, indicating Pb solubilization. All of these 15 strains were also able to dissolve the Pb minerals in a liquid medium, which was accompanied by significant decreases in pH values of the medium. Based on 16S rRNA gene sequence analysis, the Pb-solubilizing strains belonged to genera Bacillus, Paenibacillus, Brevibacterium, and Staphylococcus. A majority of the Pb-solubilizing strains were able to produce indole acetic acid and siderophores to different extents. Two of the Pb-solubilizing isolates were able to solubilize inorganic phosphate as well. Some of the strains displayed tolerance to different heavy metals and to salt stress and were able to grow in a wide pH range. Inoculation with two selected Pb-solubilizing and plant growth-promoting strains, (i.e., Brevibacterium frigoritolerans YSP40 and Bacillus paralicheniformis YSP151) and their consortium enhanced the growth and Pb uptake of B. juncea plants grown in a metal-contaminated soil. The bacterial strains isolated in this study are promising candidates to develop novel microbe-assisted phytoremediation strategies for metal-contaminated soils.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.156-172
• /
• 1999

Potential chemical hazards encountered in painting operation of four shipyards and a ship-repair shop were investigated through the material safety data sheets (MSDS). Material safety data sheets (MSDS) for 307 paints, 50 thinners and 34 binders were collected and reviewed. It was shown that various organic solvents such as aromatic hydrocarbons, aliphatic hydrocarbons, ketones, alcohols, glycols, glycol ether acetates and esters were contained in painting materials. Of these solvents, xylene was found in the largest number of painting materials. sixty percent of the thinners contained xylene in the contents of 20-100%. Other most frequently found solvents were 1-methoxypropanol, 1-methoxypropyl acetate, n-butanol, methyl isobutyl ketone, toluene, isopropanol, and n-butyl acetate, etc. Glycol ethers such as 2-methoxyethanol (2-ME), 2-methoxyethyl acetate (2-MEA), 2-ethoxyethanol (2-EE), 2-ethoxyethyl acetate (2-EEA) and 2-butoxyethanol (2-BA) were regarded as having the potential to cause adverse reproductive effects, embryotoxic effect and hematotoxic effects, and were found in some epoxy panting materials. Coal tar pitch was included in some paints(13%) where polynuclear aromatic hydrocarbons (PAHs) could be contaminated. Inorganic pigments such as lead chromate and zinc potassium chromate were found in some paints (8%). The epoxy resin based paints, which may contain isocyanates such as toluene diisocyanates and hexamethylene diisocyanates causing potential sensitization and asthma to upper respiratory organ, were mostly used in the shipyards. The constituents in the MSDS were significantly different from the results analyzed using gas chromatography/mass detector: minor constituents or impurities were omitted in many MSDS. In conclusion, xylene was the most frequent organic solvent in painting materials, and glycol ethers, including 2-ME, 2-MEA, 2-EE, 2-EEA and 2-BA, were found some products. Also, painting workers may be exposed to PAHs, lead, chromate, isocyanates, organic tin and other various chemicals. The compositions of chemicals in painting materials were variable significantly, and the hazards were changed. These facts should be considered in environmental monitoring and control of the hazards.

• Current Photovoltaic Research
• /
• 제10권4호
• /
• pp.101-106
• /
• 2022

We prepared a CsPbI₂Br solution using Cesium iodide (CsI), Lead (II) bromide (PbBr₂) and Lead (II) iodide (PbI₂) materials into a polar solvent mixture of N,N-dimethylformamide (DMF) and Dimethyl sulfoxide (DMSO). A simple spin coating technique was used for the fabrication of CsPbI₂Br absorber layer in the solution process. In order to prepare uniform coating of absorber film we adopted a hot-air process in assocation with the spin coating. It was confirmed that the thin film manufactured by the hot-air process had a higher absorption rate than that without it, and the optical band gap was measured 1.93 eV. The thin film of absorber was uniformly prepared and revealed the Black α-Cubic crystal phase as proved through X-ray diffraction analysis. Finally, a perovskite solar cell having an n-i-p structure was manufactured with a CsPbI₂Br perovskite absorption layer. From the solar cell, we obtained a power conversion efficiency (PCE) of 5.97% in a forward measurement.

• Corrosion Science and Technology
• /
• 제8권5호
• /
• pp.197-202
• /
• 2009

The high toxicity of wax, oil, varnish and volatile corrosion inhibitor(VCI) corrosion inhibitors lead to an increasing interest in using non-toxic alternatives such as anti-corrosive film. This study aims to investigate the possibility to use acryl based anti-corrosive film as a substitution of toxic corrosion inhibitors. Acryl emulsions were polymerized by several acryl monomers(acrylonitrile(AN), n-butyl acrylate(nBA), methylmethacrylate(MMA) and glycycyl methacrylate(GMA)), non-toxic corrosion inhibitor, crosslinking agents(diethylene glycol dimethacrylate(DEGDA)) and various additives in order to apply substrate of anti-corrosive film. Acryl emulsion for anti-corrosive film(AeACF) as a substrate of corrosion inhibitor film has excellent removal characteristic at above $25^{\circ}C$. The crosslinked by DEGDA in a range of above 4 wt% content anti-corrosive film can easily remove from the metal surface by using hands because it kept a balance of cohesion and adhesion strength. Anti - corrosive performance of AeACF is better than anti-corrosive oil by corrosion rate test, which was measured $54.3mg/dm^2$ day(MDD) and $142.9mg/dm^2$ day, respectively. Anti-corrosive film consisting of acryl monomers and inorganic anti-corrosive ingredients did not emit any toxic pollutants by gas chromatography. Thus it is estimated that acryl based anti-corrosion film can substitute toxic corrosion inhibitors.

• 한국축산식품학회지
• /
• 제38권1호
• /
• pp.26-42
• /
• 2018

Today incorporation of natural ingredients as inorganic phosphate replacers has come into prominence as a novel research topic due to health concerns about phosphates. In this study, we aimed to investigate the quality of emulsified chicken meatballs produced with Jerusalem artichoke powder (JAP), either alone or in combination with sodium carbonate (SC) as sodium tripolyphosphate (STPP) replacers. The results showed that naturally dried JAP showed favorable technological properties in terms of water-oil binding and gelling. Emulsion batters formulated with JAP-SC mixture showed lower jelly and fat separation, higher water-holding capacity and higher emulsion stability than control samples with STPP. In final product, incorporation of JAP-SC mixture increased moisture and reduced lipid and energy values, and kept the pH value similar to control. Added JAP lead to increments in $b^*$ values whereas decreases $L^*$ values. Cook yield was similar to control in phosphate-free samples formulated with JAP-SC mix. Either low or medium ratios of JAP in combination with SC managed to protect most of the sensory parameters, while sensory scores tend to decrease in samples containing high levels of JAP. Addition of JAP to formulations presented samples that have equivalent behavior to phosphates in terms of lipid oxidation. In conclusion, our study confirms that utilization of JAP in combination with SC had promising effects as phosphate replacers by presenting natural solutions and providing equivalent quality to standard phosphate containing products.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.301.2-301.2
• /
• 2016

Metal-oxide thin-film transistors (TFTs) have gained a considerable interest in transparent electronics owing to their high optical transparency and outstanding electrical performance even in an amorphous state. Also, these metal-oxide materials can be solution-processed at a low temperature by using deep ultraviolet (DUV) induced photochemical activation allowing facile integration on flexible substrates [1]. In addition, high-dielectric constant (k) inorganic gate dielectrics are also of a great interest as a key element to lower the operating voltage and as well as the formation of coherent interface with the oxide semiconductors, which may lead to a considerable improvement in the TFT performance. In this study, we investigated the electrical properties of solution-processed high-k strontium-doped AlOx (Sr-AlOx) gate dielectrics. Using the Sr-AlOx as a gate dielectric, indium-gallium-zinc oxide (IGZO) TFTs were fabricated and their electrical properties are analyzed. We demonstrate IGZO TFTs with a 10-nm-thick Sr-AlOx gate dielectric which can be operated at a low voltage (~5 V).

• 한국임상수의학회지
• /
• 제23권3호
• /
• pp.375-379
• /
• 2006

Detection of wooden foreign body represents a clinical challenge. Wood is typically radiolucent, so wooden foreign bodies are generally cannot be seen on survey radiography. Failure to locate and remove foreign bodies can lead the patient to the long-term secondary inflammatory reactions or infections. The dog described in the present report ingested a wooden foreign body(cotton swab stick) a year ago. The foreign body remained in the intestinal tracts which were attached to each other due to the prior abdominal operation. The wooden piece in the intestine functioned as a nidus and inorganic matters were gathered forming calculus on the outer layer of foreign body. In the radiograph, the foreign body appeared to be a chicken bone which of it's inner area was more radiolucent than the outer layer. Because the wooden foreign bodies that have remained for long time in the intestinal tract can be seen like a bone by mineralization, the diagnosis of the wooden foreign bodies should be done prudently.