• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.290-298
• /
• 2011

Natural Omija belongs to magnoliaceae was known to possess natural odor, taste, color, and various pharmaceutical & chemical characteristics. Omija extraction was extracted using ethanol as a solvent. Omija extract showed a light red-violet color of viscous liquid state. Some conclusions from the result of characteristic experiment were obtained as follows. From the result of antimicrobial experiment, occurrence of staphylococuss aureus and aspergillus niger as microbes was decreased according to the passage of time. This phenomenon could know that Omija component is affected to antimicrobial effect. From the result of dye experiment, fiber dyeing showed with some ivory color after dyed to cotton and silk. This phenomenon could know that Omija component is affected to dyeing effect from observation of scanning electron microscope(SEM). From the result of instrument analysis, inorganic components of K(107.30ppm), Na(2.110ppm), Ca(0.935ppm), Mg(0.891ppm), Li(0.270ppm) etcs from Omija were detected with ICP/OES, and aromatic components of benzene(10.808), a-pinene(13.996), phenol(14.183), ${\beta}$-terpene(15.840), a-terpinolene(17.616) etcs from Omija were also detected with GC/MSD.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.441-444
• /
• 2006

A lot of water is using in the paper mill for dilution, washing, sealing, and other process operation. As the regulation of water environment has been more tightened than ever before, water management in the paper mill becomes the most important task. Topics on reducing fresh water and increasing recycling water have been studied. Further, an interest in zero-effluent system has been increased. The pH of waste water in paper mill is usually weak acidic or neutral. The waste water in the paper mill includes water insoluble organic materials that are not easy to be dissolved in the water, inorganic materials that never react with water and chemical additives that are used to recycled fiber. This study investigated on the effect of various materials used in paper mill on COD. This data could be used to control the environmental load in paper mill. COD caused by raw materials and NBDCOD (Non Bio Degradable COD) after the activated sludge process are investigated in this study. Results obtained in this study can be used in a simulation program designed to control environmental load in the paper mill.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.19-19
• /
• 2003

We have developed a cardiac cell model (Kyoto Model) for the sinoatrial node and ventricle, which is composed of a common set of kinetic equations of membrane ionic currents, Ca$\^$2+/dynamics of sarcoplasmic reticulum and contractile protein. To expand this model by including metabolic pathways, the intracellular ATP metabolism, which is pivotal in cardiac excitation - contraction coupling, was incorporated. ATP consumption by the sarcolemmal Na$\^$+/ pump and the Ca pump in the sarcoplasmic reticulum were calculated with stoichiometry of 3Na:2K:1ATP and 2Ca:1ATP, respectively. ATP consumption by contraction was estimated according to experimental data. Dependence of contraction on ATP and inorganic phosphate was modeled, based on data of skinned cardiac fiber. in production by mitochondrial oxidative phosphorylation was modified from Korzeniewski '||'&'||' Zoladz (2001), and creatine kinase and adenylate kinase reactions were incorporated. ATP dependence of ATP-sensitive K channel and L type Ca channel were also included.

• Journal of Mushroom
• /
• v.11 no.3
• /
• pp.117-123
• /
• 2013

Hot water soluble extract was prepared from Hericium erinaceus and its neuritogenic activity on PC12h cells was analyzed, which is a clone originating from a rat pheochromocytomon. The moisture content of freeze dried hot water extract was 12.08%. The extract was mainly composed of carbohydrate (51.24%) followed by crude protein (24.04%), crude fat (0.26%), dietary fiber (5.09), and ash (12.18%). Fatty acids, glucan and inorganic constituents were found as minor components. The neuritogenic activity of hot water extract was evaluated under microscopic observation of neurite outgrowth in PC12h cells and by measuring the neurite length of induvidual cell. The extract exhibited strong effect of neurite outgrowth in a dose-dependent manner from 0.01 mg/mL to 1 mg/mL, in which longer neurite outgrowth was observed as the treatment dose increased.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.247-252
• /
• 2012

The objective of this study was to find an appropriate method and process for protecting the green color in bamboo leaves and subsequent extraction of the green colorants, chlorophyll. Various inorganic salts including cupric sulfate, ferric sulfate, and zinc chloride were employed as green color protectors. Accordingly, the effects of metal salts and treatment conditions on color protection were investigated to find appropriate protector and conditions. And also, the efficacy of bamboo colorants as a natural green dye was evaluated through dyeing and colorfastness tests. Antimicrobial activity of dyed fabrics was measured by shake flask method in terms of bacterial reduction rate using Staphylococcus aureus(ATCC 6538). On the basis of experimental results for stabilizing bamboo leaves colorants, it was confirmed that Cu was the most appropriate metal type considering dye uptake, photostability and light fastness, and its optimum concentration was 0.025%. After the stabilization, the colorants were extracted efficiently at NaOH aqueous solution of 1.00%. It was concluded that bamboo leave has a high potentiality as new resources to produce a natural green dye with antimicrobial functionality.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.19-25
• /
• 2000

In Condebelt press drying system, the temperature difference between top and bottom plate of Condebelt transfers water to bottom side, Fine fibers, stickies , ink , and various inorganic materials are also migrated to the fine wire located at the bottom plate by highly pressurized moisture flow. As a result, the fine wire contaminated by plugging of these fine and sticky materials can cause many problems such as blistering or partial crushing of paper. The contaimination of fine wire leads to a deterioroated strength together with uneven physical properties of paper. In this paper, froth-flotatiion method, which is commonly used in the field of ONP recycling process, were adopted to separate the contaminants in KOCC as a new fiber fractionation method. Standard deviation of paper strength and brighteness decreased of Condebelt fine wire were measured to investigate the effect of contaminants removal . The standard deviations of paper strength obtained from the flotated accept were not dependent on the number of condebelt press drying . However, in the case of untreated KOCC, the standard deviations were increased as press drying repeated. This indicates that the contaminant gives uneven physical properties to the paper by wire plugging . Optical and SEM images clearly illustrate the effect of contaminants on the wire condition.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.6
• /
• pp.890-896
• /
• 2018

The aim of this study was to determine volatile flavor compounds in Shingo pear juice. Volatile flavor compounds were analyzed using solid-phase micro-extraction (SPME) - gas chromatography-mass spectrometry (GC-MS). The effect of inorganic salts solution on the extraction ability of the SPME fiber was treated by adding saturated $CaCl_2$ solution at the ratio of 1:20 (v/v) after 0, 60, 120 min of preparing pear juice, respectively. As a result, a total of 22 volatile compounds were identified in Shingo pear juice. Ethyl acetate was found to be the most abundant volatile compound ($13.36{\sim}19.61{\mu}g/kg$), followed in order by hexanal, ethyl hexanoate, ethyl 3-(methylthio)-2-propenoate, ethyl octanoate and 2-hexenal. Total contents of volatile flavor compounds were $31.07{\mu}g/kg$ (control), $40.93{\mu}g/kg$ (0 min), $27.62{\mu}g/kg$ (60 min) and $26.32{\mu}g/kg$ (120 min). This result indicated that the addition of saline solutions could inhibit the enzymatic reaction of volatile flavor compounds effectively when treated as soon as juice preparation.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.382-387
• /
• 2015

The dispersion of calcium carbonate ($CaCO_3$) in polypropylene (PP) and the effect of $CaCO_3$ size on the crystallinity of PP were studied. Polymer composite usually suffers from the brittleness when reinforced with inorganic fillers. The problem is generally related to the size and dispersion of fillers. First, the dispersion was studied for the nanosize $CaCO_3$ with 15~40 nm average diameter. To enhance the dispersibility in PP, the surface of the $CaCO_3$ was treated with sodium lignosulfonate (SLS). $CaCO_3$/PP composites were prepared via melt compounding. The $CaCO_3$ coated with more than 3 wt% SLS was uniformly distributed within the PP matrix, while the uncoated $CaCO_3$ formed aggregated structures in the PP. Even with 30 wt%, the SLS-$CaCO_3$ was well dispersed in the PP matrix. Also, the transition enthalpy of $CaCO_3$/PP increased and the full-width of half maximum of the crystallization peak decreased regardless of SLS coating and size of $CaCO_3$. However, the crystallinity of PP was more influenced by nano $CaCO_3$. These results imply that the nano $CaCO_3$ coated with SLS may reduce the brittleness of polymer composites.

• Journal of Plant Biology
• /
• v.12 no.1
• /
• pp.22-30
• /
• 1969

To investigate the effects of internal radiation of various intensityon the test crop(flax), seeds of four levels of activity($15.5{\times}10-4 $\mu$c/grain, 9.0{\times}10-2$\mu$c/grain, 2.2{\times}100$\mu$c/grain and 3.8{\times}10-1$\mu$c/grain)$ which had been obtained by immersing them into various concentrations of P-32 original solution (total activity: 90 mc, To: 3/21) for 24 hours at room temperature, were germinated, transplanted later into pots, and the rate of germination and the successive growth were observed, and the inorganic conents of the plant top were analyzed. The results are as follows: 1. At the early stage of germination, the plants manifested themselves both inhibitory and promotive effects at higher and lower activity levels respectively, compared those of the control. These difference of growth on account of different levels of activity appeared, however, to be gradually narrowed in the course of time after germination, except at the highest activity. 2. Two weeks after transplanting, the plants of the lowest activity showed more vigorous growth than those of control. The plants belonging to the other activity levels on the other hand, tended to be less growing, the higher the activity. However, this growth gap between treatments seemed to be progressively closed one month after transplanting. 3. Most of the leaves and stems of the plants belonging to the highest activity level ($3.8{\times}101$\mu$c/grain$) were withered during the early stage of growth, and this damage did not recover. 4. Practically no difference of growth was observed among treatments(excluding that of highest activity) one and half months after transplanting. 5. The fluorescence tended to be mroe delayed than the control, as the activity decreased. 6. There was a tendency that the number of pods harvested were larger in the plants treated with P-32 than that of the control. 7. The proportion of fiber in the plants at harvest appeared to be larger at lower activity and smaller at higher P-32 concentration than that of control. 8. As for the inorganic contents of the plant top harvested the floowing tendency was observed: (1) Nitrogen content was highest at the highest activity level at which the poorest growth ensued. (2) There was no clear difference of phosphorus content among treatments. (3) The contents of potassium and magnesium were higher than control at the medium levels of activity. (4) Calcium content of all treated blocks was found to be more than that of control.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.402-411
• /
• 2012

Natural Bokbunja is used as a material of oriental medicine which it obtains from Rubus or Raspberry. Natural Bokbunja Rubus has natural odor and taste, natural color, and pharmaceutical & chemical characteristics. This experiment tested antimicrobial experiment against microbe and dye experiment against fiber using natural Bokbunja extract. Some conclusions from this characteristics experiment were obtained as follow. The result of antimicrobial experiment could know that ATCC-001(staphylococcus aureus) does not show nearly from 72hrs after cultivation test and ATCC-002(aspergillus niger) shows to propagate continuously according to passage of time. Also, the result of dye experiment could know that cotton and silk using alum mordant($Al_2(SO_4)_3{\cdot}13-14H_2O$) against fiber shows in direction of light beige color. The result of instrument analysis ascertained inorganic components of K(221.100ppm), Mg(17.920ppm), Ca(5.129ppm), Na(2.940ppm), Si(0.638ppm) etc from Bokbunja with ICP/OES, and ascertained organic components of boric acic(1.711), silane(2.142), pyrazole(3.481), propyl isothiocyanate(2.565), furfurole(11.521) etc from Bokbunja with GC/MSD.