• 실내환경 및 냄새 학회지
• /
• 제17권4호
• /
• pp.372-380
• /
• 2018

To abate the problem of odor from restaurants, a hybrid adsorbent consisting of organic and inorganic materials was developed and evaluated using acetaldehyde as a model compound was deveioped and evaluated. Powders of activated carbon, bentonite, and calcium hydroxide were mixed and calcinated to form adsorbent structure. The surface area of the hybrid adsorbent was smaller than that of high-quality activated carbon, but its microscopic image showed that contours and pores were developed on its surface. To determine its adsorption capacity, both batch isotherm and continuous flow column experiments were performed, and these results were compared with those using commercially available activated carbon. The isotherm tests showed that the hybrid adsorbent had a capacity 40 times higher than that of the activated carbon. In addition, the column experiments revealed that breakthrough time of the hybrid adsorbent was 2.5 times longer than that of the activated carbon. These experimental results were fitted to numerical simulations by using a homogeneous surface diffusion model (HSDM); the model estimated that the hybrid adsorbent might be able to remove acetaldehyde at a concentration of 40 ppm for a 5-month period. Since various odor compounds are commonly emitted as a mixture when meat is barbecued, it is necessary to conduct a series of experiments and HSDM simulations under various conditions to obtain design parameters for a full-scale device using the hybrid adsorbent.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.207-213
• /
• 2014

This study was carried out to investigate the feasibility and usefulness of a commercial synthetic adsorbent, Diaion HP 20, for the isolation of proanthocyanidins (PAs) from hot water extract (HWE) prepared from Pinus radiata bark. Most ultraviolet (UV) absorbing materials in HWE were adsorbed onto Diaion HP 20 and easily recovered by simple ethanol (EtOH) washing. More than 50% of the UV absorbing materials were adsorbed within 20 minutes, and the adsorption equilibrium was reached within 3 h. The recovered materials from Diaion HP 20 were mostly composed of PAs, but some monomeric flavonoids such as taxifolin and unidentified hydrophobic materials were also adsorbed. The impurities such as carbohydrates and inorganic materials contained in HWE were mostly removed by Diaion HP 20. The adsorption ability of the UV absorbing materials onto Diaion HP 20 was almost the same as the first cycle even after 14 times of repeating cycles of adsorption and desorption. The radical scavenging ability of the recovered materials from the adsorbent was slightly higher than that of the pure PAs prepared by Sephadex LH 20 from the same HWE.

• 폴리머
• /
• 제36권5호
• /
• pp.622-627
• /
• 2012

친환경 수성 코팅제의 물성 강화 및 VOCs의 저감 특성을 연구하기 위해서 poly(tetramethylene glycol) 2000, polycarbonate diol 2000, isophorone diisocyanate, dimethylolpropionic acid, 그리고 titanium dioxide를 사용하여 유/무기 하이브리드 수분산 폴리우레탄 코팅제를 제조하였다. R ratio([NCO]/[OH])에 따른 코팅제의 필름 물성 및 무기물의 적용으로 인한 VOCs의 저감 특성에 대해서 연구한 결과 R ratio가 1.5 이상인 경우에서 코팅제로 적합함을 확인하였으며 이는 하드 세그먼트의 영향으로 여겨지며 $TiO_2$의 적용으로 코팅 후 VOCs의 저감 특성을 확인하였다.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.401-406
• /
• 2017

Ammonia, $NH_3$, is a key chemical widely used in chemical industries and a toxic pollutant that impacts human health. Thus, there is a need for the development of effective adsorbents with high uptake capacities to adsorb $NH_3$. An adsorbent with a high surface area and a small pore size is generally preferred in order to have a high capacity for the removal of $NH_3$. The use inorganic nanoporous materials as gas adsorbents has increased substantially and emerged as an alternative to zeolite and activated carbon. Herein, mesoporous alumina (MA) was prepared and used as an $NH_3$ adsorbent. MA showed good pore properties such as a uniform pore size and interlinked pore system, when compared to commercial adsorbents (activated carbon, zeolite, and silica powder). MA has free hydroxyl groups, serving as useful adsorption sites for $NH_3$. In an adsorption isotherm test, MA exhibited 4.7-6.5 times higher uptake capacities for $NH_3$ than commercial adsorbents. Although the larger surface areas of adsorbents are important features of ideal adsorbents, a regular and interlinked adsorbent pore system was found to be a more crucial factor to adsorb $NH_3$.

• 공업화학
• /
• 제21권4호
• /
• pp.417-423
• /
• 2010

파라자일렌(p-xylene) 분리용 흡착제로서 효과적인 그래뉼 형태의 바인더리스 ZSM-5 성형체를 제조하는 방법을 검토하였다. $SiO_2/Al_2O_3$ = 50인 ZSM-5 결정분말에 무기 바인더인 colloidal silica sol 30 wt% 용액과 유기첨가물인 microcrystalline cellulose를 첨가하여 구형화한 후, 소성, 바인더리스 처리, ${NH_4}^+$ 이온교환, 활성화 등의 과정을 거쳐 충분한 강도(0.721 kgf) 및 높은 결정화도(94.6%)와 넓은 BET 비표면적($379.2m^2$/g)을 갖는 흡착제를 제조하였다. 제조된 성형체의 흡착특성을 평가하기 위해 자일렌 3가지 이성질체를 1 : 1 : 1의 무게비로 혼합하여 $100^{\circ}C$에서 회분식 흡착실험을 수행한 결과 제조된 바인더리스 ZSM-5 성형체는 상용흡착제보다 파라자일렌에 대해 높은 선택적 흡착성능을 나타냈다.

• 공업화학
• /
• 제16권5호
• /
• pp.719-723
• /
• 2005

Tetraethyl orthosilicate (TEOS) 혹은 1,2-bis(triethyoxysilyl)ethane (BTSE)과 여러 종류의 organosilane들을 공중합하여 유 무기 혼성 메조포러스 물질들을 제조하고, 이들이 공기 중의 휘발성 유기화합물(VOC)들을 흡착 제거하는 능력을, TEOS 만을 사용하여 제조한 친수성 무기 메조포러스물질인 SBA-15와 비교 평가하였다. 유기 구조의 도입에 의한 소수성의 증대는 메조포러스 물질이 VOC를 흡착 제거하는데 긍정적 효과를 줌을 관찰하였다. 특히 BTSE와 phenyl triethoxysilane을 중량비 90:10으로 공중합한 유 무기 혼성 메조포러스 물질의 VOC 제거 능력은 우수하였다. 또, 물속에 분산된 기름 성분을 흡착 제거하는데 유 무기 혼성 메조포러스 물질들을 유용하게 응용할 수 있음도 정성적으로 관찰하였다.

• 환경위생공학
• /
• 제22권1호
• /
• pp.17-27
• /
• 2007

This study was conducted the adsorption experiment way of organic wastewater (BOD, COD, TOC, T-N, T-P) by changing the carbonization temperature and the size of adsorbent to examine the adsorption capacity of Korean traditional charcoal which has similar characteristics to activated carbon of organic pollutants. Also, it was performed the basic experiment for pH and inorganic materials. As a result of observing Korean traditional charcoal with has the greatest inorganic contents which are the important factor of chemical adsorption. As the carbonization temperature was better high temperature charcoal than law temperature charcoal to adsorption capacity of pollutant and as the particle was minute (D size : $3.35mm{\sim}2.0mm$), it was most effective. The result of adsorption experiment of organic wastewater show that the elimination ratio of pollutants by bamboo high temperature charcoal was found as BOD(82.1%), COD(91.7%), TOC(52.4%), T-N(66.6%), T-P(83.2%) and it has most excellent adsorption capacity of organic pollutants.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.92-97
• /
• 2007

The present paper deals with gaseous carbon dioxide separation by a commercial adsorbent: X-type zeolite. Experimental work was carried out at an ambient condition focusing on how well meeting to the national guideline. A few types of reactor and material were examined, and practical capability was found in a granular bed type reactor with the flow of 2.5 CMM. An optimum design of reactor and adsorbent could provide the required concentration, less than 2500 ppm, for the continuous operation up to 10 hours. More work including automatic regeneration is now underworking.

• 한국환경과학회지
• /
• 제20권6호
• /
• pp.729-736
• /
• 2011

This work is to compare the experiment results by a continuous fixed-bed adsorption of water vapor, acetone vapor, and toluene vapor on zeolite 13X (SAU) and silica-alumina (SAK). SAU and SAK have very different pore structure but similar composition as inorganic adsorbent. The relationship between the equilibrium adsorption capacity and specific pore size range were studied. Adsorption of water vapor was more suitable on SAU than SAK because SAU has relatively more developed pores around $5\;\AA$ than SAK in the pore range of $10\sim100\;\AA$. Adsorption of acetone vapor was more suitable on SAK than SAU because SAK has relatively more developed pores around $5\sim10\;\AA$ than SAK in the pore range of less than $10\;\AA$. Adsorption of toluene vapor was more suitable on SAK than SAU because SAK has relatively more developed pores in the pore range of $10\sim100\;\AA$ than SAK. Adsorption capacity of the adsorbent was closely related to the surface area generated in the specific pore size region. But it was difficult to distinguish the relationships between adsorption capacity and micro area, and the external surface area of adsorbent.

• 한국세라믹학회지
• /
• 제42권10호
• /
• pp.654-659
• /
• 2005

The ceramic paper, which could adsorb VOC's effectively, was made by paper-making method with zeolite and ceramic fiber as main constituents. By this experiment, the optimal composition of the slurry for the ceramic paper formation was established. SEM observation showed that zeolite powder was uniformly dispersed and adhered to the paper by applying inorganic binder. The two type zeolites content in the ceramic paper was 26 wt$\%$ and its BET surface area was 131 $m^{2}$/g. The thickness and the basis weight of the ceramic paper were 0.2 mm and 130 g/$m^{2}$ respectively, and it had sufficient tensile characteristics to withstand tensile stress without tearing during corrugation. The total inorganic content of the paper was 78 wt$ \% $ and organic content was 22 wt$\%$. The equilibrium loading amount of toluene at the toluene at the toluene partial pressure of 0.2 mmHg was 3.2 wt$\%$.